
NIMRS-21Pin Decoder
CDFER/NIMRS-21Pin-Decoder
An open source 21-Pin DCC Decoder for model trains

5V buck boost is an open-source printed circuit board by TheCacophonyProject, from the TheCacophonyProject/kicad-library repository on GitHub. It is a 4-layer board with 17 parts on 11 nets, routed with 58 tracks and 32 vias.
It is built around the TPS63070RNM. Its parts include 9 capacitors, 5 resistors, 1 IC and 1 inductor. It belongs with the power boards of this library.
Cacophony kicad library of 3D models, footprints, and symbols.
Clone/download git repo.
Add new environment variable:
Preferences -> Configure Paths...CAC_KICAD_LIBRARY and Path=<path to git repo>Add Symbol library:
Preferences -> Manage Symbol Libraries...cacophony-library Path=${CAC_KICAD_LIBRARY}/cacophony-library.kicad_symAdd Footprint library:
Preferences -> Manage Footprint Libraries...cacophony-library Path=${CAC_KICAD_LIBRARY}/cacophony-library.prettycd <path to kicad-library>easyeda2kicad --full --output ./cacophony-library --lcsc_id <id>${CAC_KICAD_LIBRARY} to the start of the 3D model path in the footprint.These kicad modules are parts that I have used multiple times in different projects. They contain the schematics and the layout of the footprints.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 22uF | Capacitor_SMD:C_0603_1608Metric | C6, C7, C8, C9 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R1, R4 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 1 | 1.5uH | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 470k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 68k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | FerriteBead | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | TPS63070 | cacophony-library:TPS63070 | U1 |

CDFER/NIMRS-21Pin-Decoder
An open source 21-Pin DCC Decoder for model trains




H3wastooshort/BikeUSBv2
Charge your Phone off of your Bike while adapting charging power to available power / riding speed.


takuhoTech/LagopusSystem-2024
Avionics for Human-Powered Aircraft (Japan International Birdman Rally 2024)

TobleMiner/catear-pcb
This repo contains the PCB for the Nekomimi project of @BenBE . It will be used to illuminate 3D printed catears.
17 parts, built around the TPS63070RNM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TheCacophonyProject/kicad-library repository on GitHub, at the commit this page was made from: the board is cacophony-blocks.kicad_blocks/5V-buck-boost.kicad_block/5V-buck-boost.kicad_pcb and its schematic cac-design-blocks.kicad_blocks/RTC-PCF8563.kicad_block/RTC-PCF8563.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask TheCacophonyProject before reusing the design.