Skip to the content
4 layers60 × 60 mmBatteryBoard lipo, the printed circuit board in 3D

Avionics for Human-Powered Aircraft (Japan International Birdman Rally 2024)

Size
60 × 60 mm
Copper layers
4
Thickness
4.69 mm
Parts
80
Nets
71
Pads
315
Tracks, vias
244, 191
Pours
10
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
13 Nov 2023
Updated
19 Jul 2024

Overview

BatteryBoard lipo is an open-source printed circuit board by takuhoTech, from the takuhoTech/LagopusSystem-2024 repository on GitHub, published under the MIT licence. It is a 4-layer board of 60 × 60 mm with 80 parts on 71 nets, routed with 244 tracks and 191 vias.

It is built around the TPS63070RNM, LTC4417CGN#PBF and FDS4935A, with the ESDA13P70-1U1M among its other parts. Its parts include 29 resistors, 23 capacitors, 7 connectors, 4 ICs and 3 diodes. It belongs with the power boards of this library.

Main components

4

README

README.md

LagopusSystem-2024

Avionics for Human-Powered Aircraft (Japan International Birdman Rally 2024)

Parts

80
QtyValueFootprintReferences
10R_SmallResistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R5, R6, R7, R8, R11, R12
60.1uCapacitor_SMD:C_0603_1608MetricC2, C3, C8, C11, C20, C21
4Conn_01x07Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_VerticalJ3, J4, J5, J6
4MHMountingHole:MountingHole_2.2mm_M2_Pad_ViaH1, H2, H3, H4
310μF100V X7S 3225Capacitor_SMD:C_1210_3225MetricC1, C7, C10
31uCapacitor_SMD:C_0603_1608MetricC4, C18, C19
31uHInductor_SMD:L_1210_3225MetricL1, L2, L3
34.7kResistor_SMD:R_0603_1608MetricR15, R16, R17
2100μF10V X5R 3216Capacitor_SMD:C_1206_3216MetricC22, C24
210kResistor_SMD:R_0603_1608MetricR24, R25
21kResistor_SMD:R_0603_1608MetricR18, R19
24.7μF50V X7S 2012Capacitor_SMD:C_0805_2012MetricC30, C31
247μF16V X6S 3225Capacitor_SMD:C_1210_3225MetricC16, C17
25.1kResistor_SMD:R_0603_1608MetricR9, R10
2BATTConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalBT1, BT2
2FDS4935APackage_SO:SOIC-8_3.9x4.9mm_P1.27mmQ1, Q2
2TPS63070Module_SparkFun_Buck-Boost:VQFN-15-HR(3X2.5)U3, U4
10.047uCapacitor_SMD:C_0603_1608MetricC6
110(3216)Resistor_SMD:R_1206_3216MetricR23
110μF35V X5R 2012Capacitor_SMD:C_0805_2012MetricC23
1130kResistor_SMD:R_0603_1608MetricR27
1150kResistor_SMD:R_0603_1608MetricR29
1220μF4V X6S 3216Capacitor_SMD:C_1206_3216MetricC25
1240kResistor_SMD:R_0603_1608MetricR20
130kResistor_SMD:R_0603_1608MetricR14
1330Resistor_SMD:R_0603_1608MetricR22
1374Resistor_SMD:R_0603_1608MetricR21
14.7uCapacitor_SMD:C_0603_1608MetricC5
1470kResistor_SMD:R_0603_1608MetricR28
147pCapacitor_SMD:C_0603_1608MetricC9
15.11kResistor_SMD:R_0603_1608MetricR13
1680kResistor_SMD:R_0603_1608MetricR26
1BQ25887RGERPackage_DFN_QFN:VQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm_ThermalViasU1
1ESDA13P70-1U1MDiode_SMD_extlib:ESDA13P70-1U1MD3
1LOGOLOGO:Logo_BatteryBoardG***
1LTC4417CGNPackage_SO:SSOP-24_3.9x8.7mm_P0.635mmU2
1PWRGOODLED_SMD:LED_0603_1608MetricD2
1PowerConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ7
1STATLED_SMD:LED_0603_1608MetricD1
1SW_SPDTButton_Switch_THT_extlib:NKK_SS-12SDP2SW1
1ThermistorConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ2
1USB_C_Receptacle_USB2.0Kicad_Akiyuki_Footprint:CUI_UJC-HP-3-SMT-TRJ1

The 79 most common of 80 parts.

More from takuhoTech/LagopusSystem-2024

6
  • 4 layers60 × 60 mmBatteryBoard, the printed circuit board in 3D

    BatteryBoard

    takuhoTech/LagopusSystem-2024

    Avionics for Human-Powered Aircraft (Japan International Birdman Rally 2024)

    80 parts1MIT
  • 2 layers60 × 60 mmBatteryBoard, the printed circuit board in 3D

    BatteryBoard

    takuhoTech/LagopusSystem-2024

    Avionics for Human-Powered Aircraft (Japan International Birdman Rally 2024)

    78 parts1MIT
  • 4 layers60 × 60 mmCommunicationBoard, the printed circuit board in 3D

    CommunicationBoard

    takuhoTech/LagopusSystem-2024

    Avionics for Human-Powered Aircraft (Japan International Birdman Rally 2024)

    54 parts1MIT
  • 4 layers60 × 60 mmMediaBoard, the printed circuit board in 3D

    MediaBoard

    takuhoTech/LagopusSystem-2024

    Avionics for Human-Powered Aircraft (Japan International Birdman Rally 2024)

    49 parts1MIT
  • 2 layers20 × 50 mmSWDWriter, the printed circuit board in 3D

    SWDWriter

    takuhoTech/LagopusSystem-2024

    Avionics for Human-Powered Aircraft (Japan International Birdman Rally 2024)

    4 parts1MIT
  • 2 layers30 × 20 mmTWELiteWriter, the printed circuit board in 3D

    TWELiteWriter

    takuhoTech/LagopusSystem-2024

    Avionics for Human-Powered Aircraft (Japan International Birdman Rally 2024)

    4 parts1MIT

Similar boards

  • 2 layers70 × 65 mmNixie clock, the printed circuit board in 3D

    Nixie clock

    jason-watkins/nixie-clock

    USB-C powered nixie tube clock. Four IN-12B digits, two INS-1 colon lamps, K155ID1 BCD decoder/drivers.

    103 partsCC-BY-SA-4.0
  • 2 layers51.1 × 58.7 mmBattery switch, the printed circuit board in 3D

    Battery switch

    eclecticc/BeltPack

    Schematics and CAD for a belt PC

    40 parts5
  • 2 layers17.8 × 21 mmVBUS Switch Addon Board, the printed circuit board in 3D

    VBUS Switch Addon Board

    suzan-works/XIAO_CH32X035

    Tiny microcontroller board equipped with WCH CH32X035. WCH CH32X035を搭載した小型のマイコンボード

    29 parts8MIT
  • 2 layers29.2 × 41.5 mmUsb pd exporter, the printed circuit board in 3D

    Usb pd exporter

    74th/usb-pd-exporter

    Adapter to extract 5, 9, 12, and 20V power using CH214K, a USB PD Sink controller.

    26 parts2MIT
  • 4 layers129 × 121 mmMinyasX Combined, the printed circuit board in 3D

    MinyasX Combined

    kunichiko/X68k-MinyasX

    MinyasX は、Windows (AT互換機) 用の FDD を無改造で X68000 に接続して使えるようにするアダプタです。

    232 parts2MIT

Questions

How big is the BatteryBoard lipo PCB?

It measures 60 × 60 mm and has 4 copper layers, 4.69 mm thick.

What parts does the BatteryBoard lipo use?

80 parts, built around the TPS63070RNM, LTC4417CGN#PBF, FDS4935A and ESDA13P70-1U1M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BatteryBoard lipo KiCad files?

From the takuhoTech/LagopusSystem-2024 repository on GitHub, at the commit this page was made from: the board is Hardware/PCB/BatteryBoard/BatteryBoard_lipo.kicad_pcb and its schematic Hardware/PCB/BatteryBoard/BatteryBoard-backups/BatteryBoard-2023-12-28_211333/BatteryBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BatteryBoard lipo design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).