Boards by Th3Link

10 boards

Open-source boards designed in KiCad by Th3Link on GitHub, from 2 repositories. A board’s address here is its repository’s there.

4 layers70 × 60 mm
Tanklevel
Th3Link/tanklevel
This project provides a solution for measuring the liquid level in tanks, such as rainwater tanks, using the TL-136 pressure sensor.
80 parts4CERN-OHL-S-2.0
2 layers112 × 90 mm
Ssr
Th3Link/homeautomation
Components for a CAN-bus home-automation system: relay/rollershutter/ light/button/sensor nodes on a shared CAN bus, bridged to MQTT (and from there to openHAB or Home Assistant) by a gateway.
111 partsGPL-3.0
2 layers61 × 32 mm
CanHeader
Th3Link/homeautomation
Components for a CAN-bus home-automation system: relay/rollershutter/ light/button/sensor nodes on a shared CAN bus, bridged to MQTT (and from there to openHAB or Home Assistant) by a gateway.
12 partsGPL-3.0
2 layers126.5 × 42 mm
Canhubstar
Th3Link/homeautomation
Components for a CAN-bus home-automation system: relay/rollershutter/ light/button/sensor nodes on a shared CAN bus, bridged to MQTT (and from there to openHAB or Home Assistant) by a gateway.
17 partsGPL-3.0
2 layers22 × 36 mm
Debug adapter
Th3Link/homeautomation
Components for a CAN-bus home-automation system: relay/rollershutter/ light/button/sensor nodes on a shared CAN bus, bridged to MQTT (and from there to openHAB or Home Assistant) by a gateway.
11 partsGPL-3.0
4 layers75 × 51 mm
Mqtt gateway
Th3Link/homeautomation
Components for a CAN-bus home-automation system: relay/rollershutter/ light/button/sensor nodes on a shared CAN bus, bridged to MQTT (and from there to openHAB or Home Assistant) by a gateway.
64 partsGPL-3.0
2 layers80 × 86 mm
Pwm adapter
Th3Link/homeautomation
Components for a CAN-bus home-automation system: relay/rollershutter/ light/button/sensor nodes on a shared CAN bus, bridged to MQTT (and from there to openHAB or Home Assistant) by a gateway.
60 partsGPL-3.0
2 layers188 × 97 mm
Relais
Th3Link/homeautomation
Components for a CAN-bus home-automation system: relay/rollershutter/ light/button/sensor nodes on a shared CAN bus, bridged to MQTT (and from there to openHAB or Home Assistant) by a gateway.
101 partsGPL-3.0
2 layers48 × 49 mm
Sensors
Th3Link/homeautomation
Components for a CAN-bus home-automation system: relay/rollershutter/ light/button/sensor nodes on a shared CAN bus, bridged to MQTT (and from there to openHAB or Home Assistant) by a gateway.
58 partsGPL-3.0
2 layers48 × 49 mm
Switch
Th3Link/homeautomation
Components for a CAN-bus home-automation system: relay/rollershutter/ light/button/sensor nodes on a shared CAN bus, bridged to MQTT (and from there to openHAB or Home Assistant) by a gateway.
67 partsGPL-3.0