Skip to the content
2 layers147.5 × 35.7 mmСветоуказатель SMD, the printed circuit board in 3D

Светоуказатель SMD

StuGXD/KiCAD_boards

Some KiCAD projects for boards.

Size
147.5 × 35.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
61
Nets
72
Pads
206
Tracks, vias
414, 50
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
5 Aug 2024
Updated
8 Aug 2024

Overview

Светоуказатель SMD is an open-source printed circuit board by StuGXD, from the StuGXD/KiCAD_boards repository on GitHub. It is a 2-layer board of 147.5 × 35.7 mm with 61 parts on 72 nets, routed with 414 tracks and 50 vias.

It is built around the MAX3232ID, ADUM1201AR and TPS5430DDA, with the AMS1117-3.3, S8550 and B340A among its other parts. Its parts include 25 capacitors, 13 resistors, 8 connectors, 5 ICs and 5 diodes. It belongs with the STM32 boards of this library.

Main components

7

Parts

61
QtyValueFootprintReferences
10100 нФCapacitor_SMD:C_0603_1608MetricC8, C11, C13, C17, C18, C19, C22, C23, C24, C25
610 мкФCapacitor_SMD:C_0603_1608MetricC9, C10, C12, C14, C15, C16
510 кОмResistor_SMD:R_0603_1608MetricR2, R4, R5, R7, R12
41 кОмResistor_SMD:R_0603_1608MetricR8, R9, R11, R13
33 кОмResistor_SMD:R_0603_1608MetricR3, R6, R10
3LEDLED_SMD:LED_0603_1608MetricD3, D4, D5
220 пФCapacitor_SMD:C_0603_1608MetricC20, C21
24.7 мкФCapacitor_SMD:C_0603_1608MetricC5, C6
2S8550Package_TO_SOT_SMD:SOT-23Q1, Q2
1+Пит. панельConnector_Wire:SolderWire-2.5sqmm_1x01_D2.4mm_OD4.4mmJ3
1-Пит. панельConnector_Wire:SolderWire-2.5sqmm_1x01_D2.4mm_OD4.4mmJ2
10.01 мкФCapacitor_SMD:C_0603_1608MetricC7
110 нФCapacitor_SMD:C_0603_1608MetricC3
11000 мкФCapacitor_Tantalum_SMD:CP_EIA-7343-43_Kemet-X_Pad2.25x2.55mm_HandSolderC2
122 мкГнInductor_SMD:L_Bourns_SRR1260L1
1220 мкФCapacitor_SMD:C_0603_1608MetricC1
13.24 кОмResistor_SMD:R_0603_1608MetricR1
1470 мкФCapacitor_Tantalum_SMD:CP_EIA-7343-43_Kemet-X_Pad2.25x2.55mm_HandSolderC4
18 МГцCrystal:Crystal_SMD_HC49-SDY1
1ADuM1201ARPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU5
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1B340ADiode_SMD:D_SMCD2
1MAX3232Package_SO:TSSOP-16_4.4x5mm_P0.65mmU4
1RS232 ВыходыConnector_Wire:SolderWire-1sqmm_1x03_P7.8mm_D1.4mm_OD3.9mmJ4
1SMBJ30CADiode_SMD:D_SMBD1
1STM32F103C8TxPackage_QFP:LQFP-48_7x7mm_P0.5mmU3
1SW_PushButton_Switch_SMD:SW_SPST_CK_RS282G05A3SW1
1TPS5430DDAPackage_SO:TI_SO-PowerPAD-8_ThermalViasU1
1Земля БСConnector_Wire:SolderWire-2.5sqmm_1x01_D2.4mm_OD4.4mmJ1
1Линия 1Connector_Wire:SolderWire-2.5sqmm_1x01_D2.4mm_OD4.4mmJ8
1Линия 2Connector_Wire:SolderWire-2.5sqmm_1x01_D2.4mm_OD4.4mmJ7
1Отладка SWDConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ6
1Питание БСConnector_Wire:SolderWire-2.5sqmm_1x01_D2.4mm_OD4.4mmJ5

Similar boards

  • 2 layers105.2 × 71.1 mmOnyx PCB, the printed circuit board in 3D

    Onyx PCB

    CuriousMotor/Onyx-Stepper-Motherboard

    The successor of the iconic Arduino-CNC-shield

    96 parts56MIT
  • 2 layers50 × 50 mmBatt board, the printed circuit board in 3D

    Batt board

    Peize-Liu/404APDdemo

    404 auto pilot drone demo

    54 parts9
  • 4 layers70 × 157.5 mmController Tv Lift, the printed circuit board in 3D

    Controller Tv Lift

    vyrubaev/TV-Lift-Controller

    TVLift Controller is an intelligent controller for TV lift and lower mechanisms, based on the ESP32 microcontroller.

    103 parts
  • 2 layers10 × 38.1 mmDCDC 5V, the printed circuit board in 3D

    DCDC 5V

    Thierry-oshw/Allumettes

    module 5mm x 34mm de fonction unitaire

    30 partsCERN-OHL-P-2.0
  • 4 layers50 × 60 mmPiCCANTE OBD Dongle, the printed circuit board in 3D

    PiCCANTE OBD Dongle

    Alia5/PiCCANTE

    PiCCANTE is a powerful tool for exploring and reversing CAN busses of vehicles, based on Raspberry Pi Pico (any model)

    35 parts104GPL-3.0
  • 2 layers75.8 × 92.5 mmESP32 STEPPER CONTROL PCB, the printed circuit board in 3D

    ESP32 STEPPER CONTROL PCB

    JohnDecebal/UNDR

    UNDR AUTO is a fully automatic WDT (Weiss Distribution Technique) tool designed for espresso enthusiasts. This open-source DIY project combines 3D printed parts with electronic and mechanical components to create a…

    48 parts46
  • 2 layers85 × 56 mmOrange juice board, the printed circuit board in 3D

    Orange juice board

    jeji/orange_juice

    A orange pi zero shield board for 3D printer with klipper features

    56 parts13GPL-3.0
  • 2 layers99 × 56 mmOrange juice board, the printed circuit board in 3D

    Orange juice board

    jeji/orange_juice_2

    For Orange Pi zero 2 with klipper and more advance feature

    56 parts5

Questions

How big is the Светоуказатель SMD PCB?

It measures 147.5 × 35.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Светоуказатель SMD use?

61 parts, built around the MAX3232ID, ADUM1201AR, TPS5430DDA and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Светоуказатель SMD KiCad files?

From the StuGXD/KiCAD_boards repository on GitHub, at the commit this page was made from: the board is Светоуказатель SMD/Светоуказатель SMD.kicad_pcb and its schematic Светоуказатель SMD/Светоуказатель SMD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Светоуказатель SMD design in my own project?

Its repository states no licence, so its author keeps all rights: ask StuGXD before reusing the design.