2 layers160 × 100 mm
NetworkScanner
thainnos/ICSscannerDiode
Architecture for a secure ICS network scanner with an intelligent data diode
120 parts11GPL-3.0
2 layers118.1 × 83.8 mm
Led clock mainboard
Sternenlabor/Vintage-LED-Clockconst char cstrSSID[] = "MyNetwork"; const char cstrPWD[] = "secret";
- Size
- 118.1 × 83.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 60
- Pads
- 170
- Tracks, vias
- 303, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 15 Sep 2022
- Updated
- 23 Feb 2024
Overview
Led clock mainboard is an open-source printed circuit board by Sternenlabor, from the Sternenlabor/Vintage-LED-Clock repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 118.1 × 83.8 mm with 21 parts on 60 nets, routed with 303 tracks and 0 vias.
It is built around the LM2576T-5.0, CD40109BE and IRF1404PBF, with the ZPD15 among its other parts. Its parts include 6 ICs, 2 capacitors, 2 diodes, 2 connectors and 1 resistor. It belongs with the computers and single-board computers and lEDs and displays boards and the ESP32 boards of this library.
Main components
4
LM2576T-5.0
TO-220-5-40℃~+125℃@(TJ) 1 3A 40V 52kHz 5V 5mA Buck Buck Built-in Fixed TO-220-5 DC-DC Converters ROHSHGSEMIDC-DC Converters
CD40109BE
PDIP-16-55℃~+125℃ 1 3V~18V 3V~18V 4 Tri-State Unidirectional PDIP-16 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
IRF1404PBF
TO-220-3-55℃~+175℃ 1 N-channel 196nC@10V 202A 223pF 333W 40V 4V 4mΩ@10V 5.669nF TO-220AB MOSFETs ROHSInfineon TechnologiesMOSFETsZPD15
DO-35-50℃~+175℃ 1 Independent 100nA@11V 13.8V~15.6V 15V 500mW ±5% DO-35 Zener Diodes ROHSDIOTECZener Diodes
README
README.mdVintage-LED-Clock
WiFi configuration
SSID and credentials are kept in a separate file which is not included in GIT repository.
Create file credentials.h in src folder and add SSID and WiFi password.
e.g.:
#ifndef _CREDENTIALS_H_
#define _CREDENTIALS_H_
const char cstrSSID[] = "MyNetwork";
const char cstrPWD[] = "secret";
#endif /* _CREDENTIALS_H_ */Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | CD40109BE | CD40109BE:DIP794W45P254L1969H508Q16 | U1, U2, U3, U5, U6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 1 | 1000uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C2 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 100uH | Inductor_THT:L_Radial_D9.5mm_P5.00mm_Fastron_07HVP | L1 |
| 1 | 1N5822 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D1 |
| 1 | Conn_01x22_Female | Connector_PinSocket_2.54mm:PinSocket_1x22_P2.54mm_Vertical | J2 |
| 1 | ESP32_NODEMCU | MODULE_ESP32_NODEMCU:MODULE_ESP32_NODEMCU | U4 |
| 1 | IRF1404PBF | IRF1404PBF:Infineon_Technologies-PG-TO220-3-02_2008-904-MFG | Q1 |
| 1 | LM2576T-5.0 | LM2576T-5.0:TO170P1067X483X1651-5 | VR1 |
| 1 | LOGO | LOGO | G*** |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J1 |
| 1 | ZPD15 | Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal | D2 |
Similar boards
- 4 layers97 × 75 mm
- 2 layers271.8 × 114.3 mm
- 2 layers160 × 100.1 mm
Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
67 parts282 - 2 layers43 × 92.3 mm
DSKY driver
benkrasnow/DSKY_EL_replica
Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display
49 parts261MIT - 2 layers100 × 100 mm
- 2 layers100 × 110 mm
- 2 layers108.5 × 103.4 mm
Questions
How big is the Led clock mainboard PCB?
It measures 118.1 × 83.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Led clock mainboard use?
21 parts, built around the LM2576T-5.0, CD40109BE, IRF1404PBF and ZPD15. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Led clock mainboard KiCad files?
From the Sternenlabor/Vintage-LED-Clock repository on GitHub, at the commit this page was made from: the board is hardware/led-clock-mainboard/led-clock-mainboard.kicad_pcb and its schematic hardware/led-clock-mainboard/led-clock-mainboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Led clock mainboard design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).