Skip to the content
2 layers100 × 100 mmI8008-sbc, the printed circuit board in 3D

System board to run Intel 8008 CPU

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
83
Nets
97
Pads
384
Tracks, vias
1,028, 154
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
17 May 2024
Updated
22 Jul 2024

Overview

I8008-sbc is an open-source printed circuit board by quasiengineer, from the quasiengineer/i8008-sbc repository on GitHub. It is a 2-layer board of 100 × 100 mm with 83 parts on 97 nets, routed with 1,028 tracks and 154 vias.

It is built around the CD40109BE and MP3438GTL. Its parts include 34 resistors, 26 capacitors, 10 ICs, 2 diodes and 2 switches. It belongs with the computers and single-board computers boards and the STM32 boards of this library.

Main components

2

README

README.md

System board for Intel 8008

Video about this project: Video about this project

Board

Schematics in pdf format

schematic

Archive with gerber files and drill locations could be found here

pcb

Bill of material in CSV format

ReferenceValueQtyMouser Part Number
C4,C5,C6,C7,C8,C9,C13,C15,C20,C21,C22,C23,C24,C25,C26100n15187-CL21B104KACNFNC
R13,R14,R15,R16,R17,R18,R19,R20,R21,R22,R23,R241k12603-RT0805FRE071KL
R5,R27,R28,R29,R30,R31,R32,R33,R342209603-RT0805FRE10220RL
R1,R2,R3,R8,R25,R2610k6603-RT0805FRE1310KL
U8,U9,U10CD40109B3595-CD40109BNSR
U5,U6,U7LM339_DIP3595-LM339APWR
C14,C16,C191u3187-CL21B105KOFNNNE
R7,R1130k2603-RT0805FRE0730KL
R4,R65k12603-RT0805FRE075K1L
C17,C1810u2810-C2012JB1C106M08C
C10,C1110p2710-885012007010
C3,C124u72810-C2012X5R1C475M0B
C1,C22u22187-CL21A225KAFNNNG
Y116Mhz1520-160-10-36CKM-TR3
U4MP34381946-MP3438GTL-P
U3LM2937xT1926-LM2937ET-3.3NOPB
U2STM32H7A3RGTx1511-STM32H7A3RGT6
U1Intel 80081571-1-2199298-5
SW2RESET1667-EVP-AWED4A
SW1BOOT1113-SS3PMVT/R
R122k21603-RT0805FRE072K2L
R10390k1603-RT0805FRE07390KL
R94k71603-RT0805FRE074K7L
L227n1652-CE201210-27NJ
L18u2, 800mA1652-SRR1280-8R2Y
J2Type-C1656-DX07S016JA1R1500
FB1FerriteBead_Small1652-MH2029-101Y
D2Green1710-150080VS75000
D1Red1710-150080RS75000

Also you can find prepared Mouser project here.

Firmware

There is compiled hex file in repository, that could be flashed to PCB.

Make sure that BOOT switch lever shifted in direction of RESET button and connect the board via USB and use stm32 programming software. I am using stm32programmer.

programming

Software

Make sure that BOOT switch lever shifted in direction of stm32 MCU and connect the board via USB.

Red LED should be lighting and new terminal COM device should appear in the system.

To actually run a program in 8008 you just need to run single command:

sh
node index.js -port=COM5 -rom="programs/blank.i8008"

Where COM5 is the port name. And ROM is the path for program to be run.

Parts

83
QtyValueFootprintReferences
15100nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC4, C5, C6, C7, C8, C9, C13, C15, C20, C21, C22, C23, C24, C25, C26
121kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24
9220Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5, R27, R28, R29, R30, R31, R32, R33, R34
610kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R3, R8, R25, R26
42.5mmMountingHole:MountingHole_2.5mm_Pad_ViaH1, H2, H3, H4
31uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC14, C16, C19
3CD40109BPackage_SO:SO-16_5.3x10.2mm_P1.27mmU8, U9, U10
3LM339_DIPPackage_SO:TSSOP-14_4.4x5mm_P0.65mmU5, U6, U7
210pCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC10, C11
210uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC17, C18
22u2Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2
230kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR7, R11
24u7Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3, C12
25k1Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4, R6
116MhzComponents:XTAL_ECS-160-10-36-CKM-TR3Y1
127nInductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolderL2
12k2Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR12
1390kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR10
14k7Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR9
18u2, 800mAInductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolderL1
1BOOTComponents:SS3NPMSVTRSW1
1FerriteBead_SmallInductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolderFB1
1GreenLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD2
1Intel 8008Package_DIP:DIP-18_W7.62mm_SocketU1
1LM2937xTPackage_TO_SOT_THT:TO-220-3_VerticalU3
1MP3438Package_TO_SOT_SMD:SOT-583-8U4
1RESETComponents:EVPAWCD4ASW2
1RedLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1
1STM32H7A3RGTxPackage_QFP:LQFP-64_10x10mm_P0.5mmU2
1Type-CConnector_USB:USB_C_Receptacle_JAE_DX07S016JA1R1500J2

Similar boards

  • 4 layers263.4 × 114.3 mmKB PCB R02 KiCad, the printed circuit board in 3D

    KB PCB R02 KiCad

    OV-Tech-GmbH/OVT13

    Open-source thin-and-light 13" laptop

    686 parts79CERN-OHL-S-2.0
  • 2 layers100 × 100 mmI8080-sbc, the printed circuit board in 3D

    I8080-sbc

    quasiengineer/i8080-sbc

    FPGA-based single board computer to run Intel 8080 CPU (up to 3.125Mhz)

    116 parts13
  • 2 layers43 × 92.3 mmDSKY driver, the printed circuit board in 3D

    DSKY driver

    benkrasnow/DSKY_EL_replica

    Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display

    49 parts261MIT
  • 2 layers100 × 110 mmKikad project, the printed circuit board in 3D

    Kikad project

    Sashabg1228/dread

    hammer saw battlebot inspired by sawblaze

    53 parts1
  • 2 layers108.5 × 103.4 mmSATS, the printed circuit board in 3D

    SATS

    WPI-LNL/sats-cad

    35 parts1
  • 2 layers98 × 45 mmLockbox2, the printed circuit board in 3D

    Lockbox2

    AlexaWitkin/RFID_LockBox

    ATMega + RFID + Servo LockBox

    23 parts
  • 2 layers229 × 104.5 mmQt touch1, the printed circuit board in 3D

    Qt touch1

    blackjetrock/experimental-computer-for-schools

    IBM Experimental computer for schools

    81 parts
  • 2 layers38.1 × 38.1 mmWall clock full, the printed circuit board in 3D

    Wall clock full

    blu006/blu_BOB_and_MISC

    My breakout boards and miscellaneous boards

    58 parts

Questions

How big is the I8008-sbc PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the I8008-sbc use?

83 parts, built around the CD40109BE and MP3438GTL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the I8008-sbc KiCad files?

From the quasiengineer/i8008-sbc repository on GitHub, at the commit this page was made from: the board is pcb/i8008-sbc.kicad_pcb and its schematic pcb/i8008-sbc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the I8008-sbc design in my own project?

Its repository states no licence, so its author keeps all rights: ask quasiengineer before reusing the design.