

- Size
- 108.5 × 103.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 77
- Pads
- 241
- Tracks, vias
- 586, 12
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 Apr 2022
- Updated
- 5 May 2023
Overview
SATS is an open-source printed circuit board by WPI-LNL, from the WPI-LNL/sats-cad repository on GitHub. It is a 2-layer board of 108.5 × 103.4 mm with 35 parts on 77 nets, routed with 586 tracks and 12 vias.
It is built around the CD40109BE, A00-432-262-450 and IRLZ14PBF. Its parts include 13 connectors, 5 capacitors, 3 ICs, 3 switches and 2 resistors.
Main components
3CD40109BE
PDIP-16-55℃~+125℃ 1 3V~18V 3V~18V 4 Tri-State Unidirectional PDIP-16 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersA00-432-262-450
插件4 Gold Non-LED Phosphor bronze Shielded cat5 插件 New Arrivals ROHSEDACEthernet Connectors / Modular Connectors (RJ45 RJ11)IRLZ14PBF
TO-220AB-55℃~+175℃ 1 N-channel 10A 170pF 280mΩ@5V 2V 400pF 42pF 43W 60V 8.4nC@5V N-Channel TO-220AB MOSFETs ROHSVishay IntertechnologyMOSFETs
README
readme.mdSmall Asset Tracking System (SATS)
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4, H5, H6 |
| 4 | 100nF | Capacitor_THT:C_Rect_L7.0mm_W3.5mm_P5.00mm | C1, C2, C3, C4 |
| 2 | EXT_GPIO | TerminalConn:PHOENIX_1862042 | J12, J13 |
| 2 | MCP23017_SP | Package_DIP:DIP-28_W7.62mm | U1, U2 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 1mF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C5 |
| 1 | 3.3V | TerminalConn:PHOENIX_1862042 | J5 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 5V | TerminalConn:PHOENIX_1862042 | J4 |
| 1 | 8 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | A00-432-262-450 | QuadRJ45:A00-432-262-450 | J2 |
| 1 | AudioJack4_SwitchTR1 | AudioJack:AudioJack4_6pad | J3 |
| 1 | Beep | TerminalConn:PHOENIX_1862042 | J8 |
| 1 | CD40109BE | Package_DIP:DIP-16_W7.62mm | U3 |
| 1 | Card LED | TerminalConn:PHOENIX_1862042 | J6 |
| 1 | Card Power | TerminalConn:PHOENIX_1862042 | J9 |
| 1 | IRLZ14PBF | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q1 |
| 1 | Lock Solenoid | TerminalConn:PHOENIX_1862042 | L1 |
| 1 | Main Door Switch | TerminalConn:PHOENIX_1862042 | SW1 |
| 1 | Raspberry_Pi_2_3 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | SENSE | TerminalConn:PHOENIX_1862042 | J10 |
| 1 | SENSE Power | TerminalConn:PHOENIX_1862042 | J11 |
| 1 | Serv Door Switch | TerminalConn:PHOENIX_1862042 | SW2 |
| 1 | Third Reed Switch | TerminalConn:PHOENIX_1862042 | SW3 |
| 1 | Wiegand | TerminalConn:PHOENIX_1862042 | J7 |
More from WPI-LNL/sats-cad
2- 2 layers30.9 × 34.4 mm

- 2 layers18.4 × 8.9 mm

Similar boards
- 2 layers48.3 × 48.3 mm

- 2 layers190.5 × 114.3 mm

Datta Lab Humidity Chamber PCB
HMS-RIC/DattaLab-HumidityChamber
Controller PCB for humidity chambers
52 parts - 2 layers43 × 92.3 mm

DSKY driver
benkrasnow/DSKY_EL_replica
Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display
49 parts261MIT - 2 layers100 × 100 mm

- 2 layers100 × 110 mm

- 2 layers98 × 45 mm

- 2 layers229 × 104.5 mm

Qt touch1
blackjetrock/experimental-computer-for-schools
IBM Experimental computer for schools
81 parts - 2 layers38.1 × 38.1 mm

Questions
How big is the SATS PCB?
It measures 108.5 × 103.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SATS use?
35 parts, built around the CD40109BE, A00-432-262-450 and IRLZ14PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SATS KiCad files?
From the WPI-LNL/sats-cad repository on GitHub, at the commit this page was made from: the board is pcb/SATS.kicad_pcb and its schematic pcb/SATS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SATS design in my own project?
Its repository states no licence, so its author keeps all rights: ask WPI-LNL before reusing the design.