

TermostatoOT
- Size
- 97 × 75 mm
- Copper layers
- 4
- Thickness
- 1.58 mm
- Parts
- 91
- Nets
- 71
- Pads
- 289
- Tracks, vias
- 428, 66
- Pours
- 18
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Feb 2026
- Updated
- 25 Feb 2026
Overview
TermostatoOT is an open-source printed circuit board by AndreaGreco, from the AndreaGreco/Termostato-Schema repository on GitHub. It is a 4-layer board of 97 × 75 mm with 91 parts on 71 nets, routed with 428 tracks and 66 vias.
It is built around the TPS62260DDCR, MBR0530 and SI1308EDL, with the ZPD15, ZPD4.3 and ZPD4.7 among its other parts. Its parts include 24 capacitors, 21 resistors, 12 diodes, 6 ICs and 5 transistors. It belongs with the ESP32 boards of this library.
Main components
6TPS62260DDCR
SOT-23-5-40℃~+85℃@(TA) 1 15uA 2.25MHz 2V~6V 600mA 600mV~6V Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersMBR0530
SOD-1231 Independent 30V 5.5A 500mA 550mV@500mA 80uA@30V SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky DiodesSI1308EDL
SC-70-3-55℃~+150℃ 1 N-channel 1.4nC@10V 1.5A 1.5V 105pF 11pF 132mΩ@10V 23pF 30V 400mW N-Channel SOT-323 MOSFETs ROHSVishay IntertechnologyMOSFETsZPD15
DO-35-50℃~+175℃ 1 Independent 100nA@11V 13.8V~15.6V 15V 500mW ±5% DO-35 Zener Diodes ROHSDIOTECZener DiodesZPD4.3
DO-35-50℃~+175℃ 1 Independent 100nA 4.3V 4V~4.6V 500mW ±5% DO-35 Zener Diodes ROHSDIOTECZener DiodesZPD4.7
DO-35-50℃~+175℃ 1 Independent 100nA 4.4V~5V 4.7V 500mW ±5% DO-35 Zener Diodes ROHSDIOTECZener Diodes
Parts
91| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R12, R13, R14, R17, R18, R19 |
| 10 | 1uF/50V | Capacitor_SMD:C_0805_2012Metric | C12, C15, C16, C17, C18, C19, C20, C21, C22, C23 |
| 8 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C4, C7, C8, C9, C10, C11 |
| 8 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_ISO7380_Pad | H1, H2, H3, H4, H5, H6, H7, H8 |
| 5 | 1N4148 | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D8 |
| 4 | TestPoint | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP4, TP5, TP6, TP7 |
| 3 | MBR0530 | Diode_SMD:D_SOD-123 | D10, D11, D12 |
| 3 | MCP9804_MSOP | Package_SO:MSOP-8_3x3mm_P0.65mm | U2, U3, U5 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C13, C14 |
| 2 | 330 | Resistor_SMD:R_0402_1005Metric | R7, R9 |
| 2 | 4.7K | Resistor_SMD:R_0402_1005Metric | R10, R11 |
| 2 | 4.7uF/50V | Capacitor_SMD:C_0805_2012Metric | C24, C25 |
| 2 | NPN | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_EVQP2 | SW2, SW3 |
| 1 | 1.5k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 2.2uH | Inductor_SMD:L_Coilcraft_LPS3010 | L1 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 220K | Resistor_SMD:R_0402_1005Metric | R27 |
| 1 | 22uF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 3R | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | 50K | Resistor_SMD:R_0402_1005Metric | R25 |
| 1 | 50pF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J6 |
| 1 | Conn_01x02_Socket | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | Conn_01x03 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J5 |
| 1 | Conn_01x05_Pin | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J4 |
| 1 | ESP32-WROOM-E | PCM_Espressif:ESP32-WROOM-32E | U6 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Molex_47219-2001 | J7 |
| 1 | PC827 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | PNP | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Q_PNP_BEC | Package_TO_SOT_SMD:SOT-23 | Q5 |
| 1 | Si1308EDL | Package_TO_SOT_SMD:SOT-323_SC-70 | Q4 |
| 1 | ZPD15 | Diode_SMD:D_SOD-123F | D6 |
| 1 | ZPD4.3 | Diode_SMD:D_SOD-123F | D7 |
| 1 | ZPD4.7 | Diode_SMD:D_SOD-123F | D5 |
| 1 | ~ | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | ~ | Connector_FFC-FPC:TE_2-1734839-4_1x24-1MP_P0.5mm_Horizontal | D9 |
Similar boards
- 2 layers60 × 97.5 mm

- 2 layers160 × 100 mm

NetworkScanner
thainnos/ICSscannerDiode
Architecture for a secure ICS network scanner with an intelligent data diode
120 parts11GPL-3.0 - 2 layers271.8 × 114.3 mm

- 2 layers118.1 × 83.8 mm

Led clock mainboard
Sternenlabor/Vintage-LED-Clock
const char cstrSSID[] = "MyNetwork"; const char cstrPWD[] = "secret";
21 partsUnlicense - 2 layers160 × 100.1 mm

Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
67 parts282 - 4 layers45 × 32 mm

Templog mainboard
Michael-Manning/E-Paper-Climate-Logger
Firmware, PCB, and enclosure for the Weathergotchi E-Paper climate logger.
68 parts457MIT - 2 layers83.2 × 40 mm

- 2 layers45 × 45 mm

Aeroq Hardware v3
EnriqueNeyra/Aeroq
An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54
56 parts130
Questions
How big is the TermostatoOT PCB?
It measures 97 × 75 mm and has 4 copper layers, 1.58 mm thick.
What parts does the TermostatoOT use?
91 parts, built around the TPS62260DDCR, MBR0530, SI1308EDL and ZPD15. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TermostatoOT KiCad files?
From the AndreaGreco/Termostato-Schema repository on GitHub, at the commit this page was made from: the board is TermostatoOT.kicad_pcb and its schematic TermostatoOT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TermostatoOT design in my own project?
Its repository states no licence, so its author keeps all rights: ask AndreaGreco before reusing the design.