
Names LED board
Sheepy3/UMD_DBF_2027_Electronics
Repository for PCB's, Software, and research by the UMD DBF 2026-2027 Electronics subteam

Repository for PCB's, Software, and research by the UMD DBF 2026-2027 Electronics subteam
LED Board Base is an open-source printed circuit board by Sheepy3, from the Sheepy3/UMD_DBF_2027_Electronics repository on GitHub. It is a 2-layer board of 118 × 69 mm with 45 parts on 73 nets, routed with 191 tracks and 157 vias.
It is built around the RP2040-ZERO and XPEBRD-L1-0000-00501. Its parts include 18 diodes, 13 switches, 10 connectors, 3 resistors and 1 IC. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | SW_SPDT | LED_Footprints:1101A2CQEA | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13 |
| 6 | Conn_01x02_Socket | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J5, J6, J7, J8, J9, J10 |
| 5 | GA CS8PM1.23-LPLR-W3-0-350-R18 | LED_Footprints:KP_CSLNM1.F1-8N7P-A-0-1000-R18 | D4, D5, D6, D7, D8 |
| 5 | GY CSHPM1.23-KQKS-36-0-350-R18 | LED_Footprints:KP_CSLNM1.F1-8N7P-A-0-1000-R18 | D14, D15, D16, D17, D18 |
| 5 | XPEBRD-L1-0000-00501 | LED_Footprints:XPEBRD-L1-0000-00501 | D9, D10, D11, D12, D13 |
| 3 | 10K ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 3 | Conn_01x02_Socket | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm_Relief | J1, J2, J3 |
| 2 | KP CSLNM1.F1-8N7P-A-0-1000-R18 | LED_Footprints:KP_CSLNM1.F1-8N7P-A-0-1000-R18 | D2, D3 |
| 1 | Conn_01x02_Socket | Connector_Wire:SolderWire-1sqmm_1x02_P7.8mm_D1.4mm_OD3.9mm_Relief | J4 |
| 1 | LE CG Q8WP-7P6Q-2-0-A40-R18-ZI | LED_Footprints:LE_CG_Q8WP-7P6Q-2-0-A40-R18-ZI | D1 |
| 1 | RP2040-ZERO | LED_Footprints:MODULE_RP2040-ZERO | U1 |

Sheepy3/UMD_DBF_2027_Electronics
Repository for PCB's, Software, and research by the UMD DBF 2026-2027 Electronics subteam



beekeeb/zerosprey42
Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.


ravinrabbid/DonCon2040
RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers

nmur/RP2040-TestPatternGenerator
A simple test pattern generator running on the RP2040 microcontroller

ChrisChrisLoLo/bunchiez40
A pocket keyboard that makes use of mouse switches to achieve a miniscule size

It measures 118 × 69 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the RP2040-ZERO and XPEBRD-L1-0000-00501. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Sheepy3/UMD_DBF_2027_Electronics repository on GitHub, at the commit this page was made from: the board is PCB/LED_Board_Base/LED_Board_Base.kicad_pcb and its schematic PCB/LED_Board_Base/LED_Board_Base.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Sheepy3 before reusing the design.