
NRF24 jammer
W0rthlessS0ul/nRF24_jammer
The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.

BF FluidNC is an open-source printed circuit board by Sheepy3, from the Sheepy3/Babies-First-FluidNC repository on GitHub, published under the MIT licence. It is a 2-layer board of 80.5 × 43.3 mm with 18 parts on 47 nets, routed with 185 tracks and 13 vias.
It is built around the ESP32-WROOM-32D. Its parts include 5 connectors, 4 ICs and 3 capacitors. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | LOGO | LOGO | G***, G***, G***, G***, G*** |
| 3 | 100µf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2, C3 |
| 3 | A4988_STEPPER_MOTOR_DRIVER_CARRIER | MODULE_A4988_STEPPER_MOTOR_DRIVER_CARRIER:MODULE_A4988_STEPPER_MOTOR_DRIVER_CARRIER | U2, U3, U4 |
| 3 | Conn_Stepper | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2, J3, J4 |
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J5 |
| 1 | Conn_01x03_Socket | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J1 |
| 1 | ESP32-WROOM-32D | ESP32-WROOM-32D:ESP32-WROOMD-Devboard_Truncated | U1 |
| 1 | SolderJumper | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |

W0rthlessS0ul/nRF24_jammer
The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.


doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!


voltlog/Valve-Actuator
If you are looking for sources of previous revisions (revA, revB, revC) checkout the different branches of this repo.

Jutta-Proto/protocol-cpp
C++ JURA protocol implementation for controlling a Jura coffee maker over a serial (UART) connection.


It measures 80.5 × 43.3 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the ESP32-WROOM-32D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Sheepy3/Babies-First-FluidNC repository on GitHub, at the commit this page was made from: the board is BF_FluidNC/BF_FluidNC.kicad_pcb and its schematic BF_FluidNC/BF_FluidNC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).