SeniorDesign-2024/ControlBoard_HardwareControlBoard Hardware is an open-source printed circuit board by SeniorDesign-2024, from the SeniorDesign-2024/ControlBoard_Hardware repository on GitHub. It is a 2-layer board of 96.5 × 66 mm with 34 parts on 36 nets, routed with 146 tracks and 19 vias.
It is built around the TSR 1-2450. Its parts include 6 resistors, 5 diodes, 4 ICs, 1 capacitor and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | Molex_SL_02 | MRDT_Connectors:MOLEX_SL_02_Horizontal | Conn1, Conn6, Conn7, Conn8, Conn9, Conn10, Conn11, Conn13, Conn14 |
| 5 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5 |
| 3 | 300 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R5, R6 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 2 | Molex_SL_03 | MRDT_Connectors:MOLEX_SL_03_Horizontal | Conn5, Conn12 |
| 2 | Molex_SL_04 | MRDT_Connectors:MOLEX_SL_04_Horizontal | Conn2, Conn4 |
| 2 | TSR_1-2450 | Converter_DCDC:Converter_DCDC_TRACO_TSR-1_THT | U2, U11 |
| 1 | 1000 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 1000uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C14 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | Conn_01x06 | Connector_Molex:Molex_SL_171971-0006_1x06_P2.54mm_Vertical | J1 |
| 1 | LOGO | MRDT_Silkscreens:yagi | G*** |
| 1 | OKI-78SR-12 | Converter_DCDC:Converter_DCDC_Murata_OKI-78SR_Horizontal | U4 |
| 1 | ~ | ControlBoard_Footprints:Teensy_4_0 | U1 |
corygrant/dingoPDM
Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.
hberntsen/mhi-ac-ctrl-esp32
Control MHI Airconditioning locally using your own ESP32 series chip!
idlehandsdev/shark_bait
The files and firmware for the Shark Bait wireless pumping system.
It measures 96.5 × 66 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the TSR 1-2450. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SeniorDesign-2024/ControlBoard_Hardware repository on GitHub, at the commit this page was made from: the board is ControlBoard_Hardware/ControlBoard_Hardware.kicad_pcb and its schematic ControlBoard_Hardware/ControlBoard_Hardware.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SeniorDesign-2024 before reusing the design.
