2 layers58.5 × 19.5 mm
TallyLight
SamuelEames/TallySystems
Tally light system for vMix using Arduino USB MIDI controller, transmitting tally light data to receiver modules on cameras using NRF24L01 radios
48 parts
4 layers95.5 × 95 mm
TallyLight Panel
SamuelEames/TallySystemsTally light system for vMix using Arduino USB MIDI controller, transmitting tally light data to receiver modules on cameras using NRF24L01 radios
- Size
- 95.5 × 95 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 192
- Nets
- 57
- Pads
- 800
- Tracks, vias
- 1,956, 400
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 10 May 2020
- Updated
- 17 Jul 2024
Overview
TallyLight Panel is an open-source printed circuit board by SamuelEames, from the SamuelEames/TallySystems repository on GitHub. It is a 4-layer board of 95.5 × 95 mm with 192 parts on 57 nets, routed with 1,956 tracks and 400 vias.
It is built around the ATMEGA328PB-AU, NRF24L01 and VEML7700-TT, with the BSS138DW-7-F-ES, SD-1210 and TC1263-3.3VOATR among its other parts. Its parts include 72 capacitors, 32 ICs, 24 resistors, 4 diodes and 4 transistors. It belongs with the audio and music boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
8
ATMEGA328PB-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 27 2KB 32KB 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog、Touch function TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
NRF24L01
QFN-20-EP(4x4)-40℃~+85℃ -85dBm 0dBm 1.9V~3.6V 2.4GHz 2Mbps CRC check function、Automatic response function、Automatic retransmission function SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSNordic SemiconRF Transceiver ICs
VEML7700-TT
SMD-4P-25℃~+85℃ 120klx 16bit 2.35mm 2.5V~3.6V 3mm 6.8mm I2C Light Intensity Low power/sleep mode、Spectral correction/filtering、High dynamic range measurement、Adjustable gain control、Interrupt/event trigger、Built-in temperature compensation SMD-4P Ambient Light Sensors ROHSVishay IntertechnologyAmbient Light Sensors
BSS138DW-7-F-ES
SOT-363-55℃~+150℃ 1.5Ω@10V、1.6Ω@4.5V 1V 2 N-Channel 2.2pF 25pF 410mA 417mW 60V 650pC@4.5V 9.7pF N-Channel SOT-363 MOSFETs ROHSElecSuperMOSFETs
SD-1210
插件插件 Rotary Encoders ROHSNidecRotary Encoders
TC1263-3.3VOATR
SOIC-8-150mil-40℃~+125℃ 1 130uA 3.3V 500mA 64dB@(1kHz) 650mV@(500mA) 6V Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOIC-8-150mil Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TS02-66-50-BK-260-SCR-D
插件-30℃~+80℃ 12V 2.6N 50mA 5mm 60,000 Cycles 6mm 6mm PC Pin Round Button SPST Through Hole 插件 Tactile Switches ROHSCUITactile Switches
USB4125-GF-A-0190
SMD-30℃~+85℃ 1 20 thousand cycles 3A 48V 6P Black Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdvMixTally
Tally light system for vMix using Arduino USB MIDI controller, transmitting tally light data to receiver modules on cameras using NRF24L01 radios
MIDI Map
Notes
-
Use midi note value to set colour of LEDs on tally lights
-
Channel = 2
Data from vMix
- Preview Note 000-031
- Program Note 100-131
- Streaming
Data from BMD
- Preview
- Program
- AUX
BMD Inputs 1-8 MP 1-2 Col 1-2 FTB
Tally Light Colours
| BMD | ||||
|---|---|---|---|---|
| No Signal | Program | Preview | ||
| vMix | No Signal | NA | Yellow | Blue |
| Program | Yellow | Red | Green | |
| Preview | Blue | Green | Off |
Resources
BMD-Arduino interface https://github.com/mathijsk/Arduino-Library-for-ATEM-Switchers
Insanely cool company https://www.skaarhoj.com/various/atem-arduino-case-stories/ https://www.skaarhoj.com/support/manual/
Parts
192| Qty | Value | Footprint | References |
|---|---|---|---|
| 44 | 104 | SamacSys_Parts:C0805 | C1, C1, C1, C1, C14, C14, C14, C14, C15, C15, C15, C15, C16, C16, C16, C16 +28 |
| 12 | LED | LED_SMD:LED_0805_2012Metric | 3V3, 3V3, 3V3, 3V3, 5V, 5V, 5V, 5V, D5, D5, D5, D5 |
| 8 | 105 | SamacSys_Parts:CAPC2012X135N | C9, C9, C9, C9, C11, C11, C11, C11 |
| 8 | 106 | SamacSys_Parts:CAPC1608X90N | C12, C12, C12, C12, C13, C13, C13, C13 |
| 8 | 22p | SamacSys_Parts:C0805 | C17, C17, C17, C17, C18, C18, C18, C18 |
| 8 | 300R | Samuel_Library:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R5, R5, R5, R6, R6, R6, R6 |
| 8 | 5K1 | Samuel_Library:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R1, R1, R1, R2, R2, R2, R2 |
| 4 | 100K | Samuel_Library:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R3, R3, R3 |
| 4 | 10K | SamacSys_Parts:YC124JR0710KL | RN1, RN1, RN1, RN1 |
| 4 | 130R | Samuel_Library:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R4, R4, R4 |
| 4 | 16M | SamacSys_Parts:ABLS | 16M, 16M, 16M, 16M |
| 4 | 471 | SamacSys_Parts:C0805 | C10, C10, C10, C10 |
| 4 | ATMEGA328PB-AU | SamacSys_Parts:QFP80P900X900X120-32N | ATMEGA328P, ATMEGA328P, ATMEGA328P, ATMEGA328P |
| 4 | BSS138DW-7-F | SamacSys_Parts:SOT65P210X110-6N | Q1, Q1, Q1, Q1 |
| 4 | Conn_01x01_Pin | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | D2, D2, D2, D2 |
| 4 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4, J4, J4, J4 |
| 4 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | PROG, PROG, PROG, PROG |
| 4 | LED 1 | Samuel_Library:SK6812_SIDE-A | U1, U1, U1, U1 |
| 4 | LED 2 | Samuel_Library:SK6812_SIDE-A | U2, U2, U2, U2 |
| 4 | LED 3 | Samuel_Library:SK6812_SIDE-A | U3, U3, U3, U3 |
| 4 | LED 4 | Samuel_Library:SK6812_SIDE-A | U4, U4, U4, U4 |
| 4 | LED 5 | Samuel_Library:SK6812_SIDE-A | U5, U5, U5, U5 |
| 4 | LED 6 | Samuel_Library:SK6812_SIDE-A | U6, U6, U6, U6 |
| 4 | LED 7 | Samuel_Library:SK6812_SIDE-A | U7, U7, U7, U7 |
| 4 | LED 8 | Samuel_Library:SK6812_SIDE-A | U8, U8, U8, U8 |
| 4 | NRF24L01 | MySensors:NRF24L01-SMD | NRF24L01, NRF24L01, NRF24L01, NRF24L01 |
| 4 | SD-1210 | SamacSys_Parts:SD1210 | TALLY #, TALLY #, TALLY #, TALLY # |
| 4 | TC1263-3.3VOATR | SamacSys_Parts:SOIC127P600X175-8N | TC1263, TC1263, TC1263, TC1263 |
| 4 | TS02-66-50-BK-260-SCR-D | SamacSys_Parts:TS026650BK260SCRD | SET, SET, SET, SET |
| 4 | USB4125-GF-A-0190 | SamacSys_Parts:USB4125GFA0190 | USB, USB, USB, USB |
| 4 | VEML7700-TT | SamacSys_Parts:VEML7700 | VEML7700, VEML7700, VEML7700, VEML7700 |
More from SamuelEames/TallySystems
1Similar boards
- 6 layers244 × 244 mm
Retroslop
CPTforever/8088-MicroATX-Computer
A 8088 based, IBM 5150 like computer compatible with the MicroATX motherboard form factor.
193 parts - 2 layers24 × 42 mm
Basalt pcb
oc-ece-mesa/mesa-basalt
A cost-effective and easy to assemble STM32C071 based devboard
16 parts - 4 layers22.1 × 52 mm
Optical Implant
poojanth/ForschungsProjekt
This project focused on the design and optimization of a printed circuit board (PCB) for an implantable optical sensor system intended for biomedical research.
58 parts - 2 layers21.6 × 41.9 mm
- 2 layers127 × 118.9 mm
ESP32-S3-WROOM ControlStand
RobertPHeller/2ndGenLocoControlStand
Model 2nd Generation Diesel Locomotive Control Stand
109 parts3GPL-3.0 - 2 layers93.8 × 39.5 mm
- 4 layers74 × 36.3 mm
Loudcardsdevice
gelotek-com/Anki-In-Hardware
Building a physical flashcard device inspired by Anki and spaced repetition.
87 parts2 - 4 layers49 × 80 mm
70MHz Soil Sensor
jhns-de/70MHz-Soil-Sensor
Soil moisture and electrical conductivity (EC) sensor based on 70 MHz impedance measurement, developed as part of my master’s thesis.
130 parts2
Questions
How big is the TallyLight Panel PCB?
It measures 95.5 × 95 mm and has 4 copper layers, 4.69 mm thick.
What parts does the TallyLight Panel use?
192 parts, built around the ATMEGA328PB-AU, NRF24L01, VEML7700-TT and BSS138DW-7-F-ES. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TallyLight Panel KiCad files?
From the SamuelEames/TallySystems repository on GitHub, at the commit this page was made from: the board is KiCad/TallyLight_Panel.kicad_pcb and its schematic KiCad/TallyLight/TallyLight.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TallyLight Panel design in my own project?
Its repository states no licence, so its author keeps all rights: ask SamuelEames before reusing the design.