gelotek-com/Anki-In-Hardware2Building a physical flashcard device inspired by Anki and spaced repetition.
Loudcardsdevice is an open-source printed circuit board by gelotek-com, from the gelotek-com/Anki-In-Hardware repository on GitHub. It is a 4-layer board of 74 × 36.3 mm with 87 parts on 59 nets, routed with 427 tracks and 52 vias.
It is built around the ESP32-C3-WROOM-02-H4, TPA6132A2RTE and W25Q128JVSIQ, with the AMS1117-3.3, PCM5102APW and 0603B104K250CT among its other parts. Its parts include 29 capacitors, 24 resistors, 5 ICs, 5 diodes and 5 switches. It belongs with the ESP32 and RISC-V boards of this library.
Building a physical flashcard device inspired by Anki and spaced repetition.
Watch the full project here:
🎥 https://www.youtube.com/playlist?list=PLZI8gkIZC2W3yhb4EUrMZ4vrkucjjzuon
My website for more details: https://gelotek.com/AIH/
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11 |
| 10 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C5, C6, C8, C9, C10, C15, C27, C29 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R10, R11, R12 |
| 7 | 10u | Capacitor_SMD:C_0603_1608Metric | C4, C7, C13, C14, C17, C26, C28 |
| 7 | 1u | Capacitor_SMD:C_0603_1608Metric | C3, C19, C20, C21, C22, C24, C25 |
| 6 | 5.1k | Resistor_SMD:R_0603_1608Metric | R5, R14, R15, R22, R23, R24 |
| 5 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5 |
| 4 | 50 | Resistor_SMD:R_0603_1608Metric | R6, R7, R8, R9 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4 |
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 3 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C11, C12, C23 |
| 3 | 22 | Resistor_SMD:R_0603_1608Metric | R16, R17, R18 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R13, R21 |
| 2 | 2.2n | Capacitor_SMD:C_0603_1608Metric | C16, C18 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric | R19, R20 |
| 1 | 5V, 1200W TVS | Diode_SMD:D_SOD-323F | D5 |
| 1 | 600Ω @ 100MHzSize 0805 preferred for audio rails. | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | AudioJack4 | Connector_Audio:Jack_3.5mm_PJ320D_Horizontal | J2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U1 |
| 1 | PCM5102A | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | TPA6132A2RTE | Package_DFN_QFN:WQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm_ThermalVias | U4 |
| 1 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J3 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U2 |
ivarhak/BlueprintFlightComputerPCB
Files for my flight computer project as a part of the Hack Club foundation's Blueprint program 2025. Board has an STM chip, 2 BMP351 barometers, 1 ICM-42688-P IMU, a microSD slot, battery charging capabilities, and…
HasiKe/Exhaust-Mic
Motorcycle Exhaust and Intake Microphone for best soud on Videos.
electgpl/NodeAlarm
This project is a simple motion sensor with subgigahertz FSK interface based on RFM69 and ESP32C3 RISC-V core, all devices are woken from deep sleep by the IRQ of AS312 PIR sensor, this project is open source and…
SP8EBC/ParaPRZEKAZNIK-pcb
SPDT relays board controled by single TTL input, with an option for Modbus-RTU MCU module, with PT1000 temperature measurement
the78mole/jumpstarter-mono
This is a monorepo containing all jumpstarter tools and (hopefully) adds a standalone server soon.
It measures 74 × 36.3 mm and has 4 copper layers, 1.6 mm thick.
87 parts, built around the ESP32-C3-WROOM-02-H4, TPA6132A2RTE, W25Q128JVSIQ and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gelotek-com/Anki-In-Hardware repository on GitHub, at the commit this page was made from: the board is PCB_Files/loudcardsdevice.kicad_pcb and its schematic PCB_Files/5VPowerSupply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask gelotek-com before reusing the design.