Skip to the content
12345678

TC1263-3.3VOATR

Microchip TechnologyExtended

-40℃~+125℃ 1 130uA 3.3V 500mA 64dB@(1kHz) 650mV@(500mA) 6V Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOIC-8-150mil Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

DatasheetJLCPCBLCSC
Part id
microchip/TC1263-3.3VOATR
Category
Voltage Regulators Linear, Low Drop Out (LDO) Regulators
Package
SOIC-8-150mil
Pins
2
In stock
0 at JLCPCB (C624792)
Used on
5 open-source boards

Overview

The TC1263-3.3VOATR is a voltage Regulators Linear, Low Drop Out (LDO) Regulator made by Microchip Technology in a SOIC-8-150mil package with 2 pins. -40℃~+125℃ 1 130uA 3.3V 500mA 64dB@(1kHz) 650mV@(500mA) 6V Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOIC-8-150mil Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its footprint (Package_SO:SO-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C624792). 5 open-source boards in 4 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

12345678
Package_SO:SO-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

16
Supply, least
2.7 V · VIN, recommended operating, min; also requires VIN ≥ VOUT + dropout · p. 2
Supply, most
6 V · VIN, recommended operating, max · p. 2
Supply, absolute maximum
6.5 V · VIN, absolute maximum · p. 2
Works from
-40 °C · TA, specified operating ambient, min · p. 3
Works up to
125 °C · TA, specified operating ambient, max; TJ must not exceed 125°C · p. 3
Junction, hottest
125 °C · TJ, operating junction temperature, max · p. 3
Takes working
80 µA · VIN quiescent current, SHDN high, IL = 0, typical · p. 2
Takes at most
130 µA · VIN quiescent current, SHDN high, IL = 0, max · p. 2
Takes asleep
50 nA · Shutdown supply current, SHDN = 0 V, typical · p. 2
Gives
500 mA · Rated continuous output current, minimum guaranteed capability · p. 2
Current limit
1.2 A · Output short-circuit current, VOUT = 0 V, typical · p. 2
Dropout
20 mV · IL = 100 uA, typical · p. 2
Dropout
60 mV · IL = 100 mA, typical · p. 2
Dropout
200 mV · IL = 300 mA, typical · p. 2
Dropout
350 mV · IL = 500 mA, typical · p. 2
Junction to air (8L-SOIC)
163 K/W · Junction to ambient, typical · p. 3

Open-source boards using it

5
  • 4 layers22.1 × 52 mmOptical Implant, the printed circuit board in 3D

    Optical Implant

    poojanth/ForschungsProjekt

    This project focused on the design and optimization of a printed circuit board (PCB) for an implantable optical sensor system intended for biomedical research.

    58 parts
  • 4 layers95.5 × 95 mmTallyLight Panel, the printed circuit board in 3D

    TallyLight Panel

    SamuelEames/TallySystems

    Tally light system for vMix using Arduino USB MIDI controller, transmitting tally light data to receiver modules on cameras using NRF24L01 radios

    192 parts
  • 2 layers127 × 118.9 mmESP32-S3-WROOM ControlStand, the printed circuit board in 3D

    ESP32-S3-WROOM ControlStand

    RobertPHeller/2ndGenLocoControlStand

    Model 2nd Generation Diesel Locomotive Control Stand

    109 parts3GPL-3.0
  • 2 layers58.5 × 19.5 mmTallyLight, the printed circuit board in 3D

    TallyLight

    SamuelEames/TallySystems

    Tally light system for vMix using Arduino USB MIDI controller, transmitting tally light data to receiver modules on cameras using NRF24L01 radios

    48 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TC1263-3.3VOATR?

Yes. the footprint Package_SO:SO-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TC1263-3.3VOATR?

SOIC-8-150mil, with 2 pins. Its footprint is drawn on this page.

Where is the TC1263-3.3VOATR datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the TC1263-3.3VOATR?

JLCPCB lists it as part C624792, with 0 in stock; the sellers' links on this page open their listings.

What can replace the TC1263-3.3VOATR?

Parts like it in the library: the LDI1117-3.3D by DIOTEC, the MAX687ESA by Maxim Integrated (Analog Devices), the MAX688ESA by Maxim Integrated (Analog Devices) and the MIC39101-3.3BM by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TC1263-3.3VOATR?

5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.