Skip to the content
2 layers123.7 × 67.5 mmDRIVE, the printed circuit board in 3D

Designed a Autonomous Drive System PCB

Size
123.7 × 67.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
35
Nets
69
Pads
159
Tracks, vias
198, 10
Pours
5
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
10 Oct 2025
Updated
10 Oct 2025

Overview

DRIVE is an open-source printed circuit board by Sagnik-Tech, from the Sagnik-Tech/Drive-Subsystem-PCB-Design repository on GitHub. It is a 2-layer board of 123.7 × 67.5 mm with 35 parts on 69 nets, routed with 198 tracks and 10 vias.

It is built around the AO3401 and DEV-16771. Its parts include 16 connectors, 4 capacitors, 2 ICs, 1 resistor and 1 diode.

Main components

2

README

README.md

Drive-Subsystem-PCB-Design

Designed a Drive Subsystem PCB containing Teensy 4.1 MCU which helps in smooth autonomous navigation with precision of Mars Rover in harsh terrains. Consists of BNO055 for monitoring the orientation of the rover. MCP2515 module is also present as the communication between the Drive Subsystem and NVIDIA Jetson Orin( the main on-board computer of our rover).

Parts

35
QtyValueFootprintReferences
7Conn_01x04Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ7, J9, J24, J25, J28, J29, J30
6Conn_01x03Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ1, J2, J3, J4, J5, J6
20.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC12, C13
2TestPointTestPoint:TestPoint_Pad_D2.0mmTP4, TP5
1100nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC8
110uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC11
1220RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5
1AO3401AO3401:SOT23U8
1Conn_01x02Connector_Phoenix_GMSTB:PhoenixContact_GMSTBA_2,5_2-G-7,62_1x02_P7.62mm_HorizontalJ31
1Conn_01x02Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ8
1Conn_01x07MCP2515:MCP2515e1
1Conn_01x102472:MODULE_2472J11
1DEV-16771DEV-16771:MODULE_DEV-16771U2
1LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD4
1LOGOhalo:saG***
1LOGOhalo:soft&wetG***
1LOGOhalo:kharuscumG***
1LOGOhalo:oddG***
1LOGOhalo:iedcG***
1LOGOhalo:uG***

The 33 most common of 35 parts.

Similar boards

  • 4 layers96.5 × 81.3 mmHexapod PCB KiCad Project, the printed circuit board in 3D

    Hexapod PCB KiCad Project

    Aecert-Robotics/Hexapod

    A hexapod powered by Arduino using hobby servos

    48 parts15GPL-3.0
  • 4 layers62.8 × 97.5 mmOceanAI, the printed circuit board in 3D

    OceanAI

    daniel360kim/OceanAI

    A robotic and software orientated ocean development.

    124 parts14MIT
  • 2 layers197.3 × 121.2 mmTeensyMaestro Main PCB, the printed circuit board in 3D

    TeensyMaestro Main PCB

    rimuadmin/TeensyMaestro-Hardware

    Hardware for the TeensyMaestro

    115 parts13CERN-OHL-P-2.0
  • 2 layers90 × 100 mmEcse controls flight computer, the printed circuit board in 3D

    Ecse controls flight computer

    ALTAIR-McGill-x-UVictoria/HAB-Control-Flight-Computer

    ECSE Control Capstone Team- High Altitude Balloon Flight Computer

    34 parts3MIT
  • 2 layers106.8 × 96.4 mmHasp flight computer, the printed circuit board in 3D

    Hasp flight computer

    Big-Red-Sat/High-Altitude-Student-Platform

    This repository contains the hardware designs, data, and analysis of perovskite solar cells on high altitude balloons

    292 parts3
  • 2 layers88.9 × 88.9 mmMain board v2, the printed circuit board in 3D

    Main board v2

    NeverNotJohn/CSUF-NASA-USLI-2026

    California State University Fresno (CSUF) Github for the 2025-2026 NASA USLI Competition

    29 parts2
  • 4 layers77.1 × 76.2 mmTellus, the printed circuit board in 3D

    Tellus

    IEEE-Robotics-Club/MSU-NASA-Minds-2023

    The code repository for the 2023 MSU NASA Minds competition

    37 parts1GPL-3.0
  • 4 layers176.8 × 115.3 mmUven2-mk2-mainboard, the printed circuit board in 3D

    Uven2-mk2-mainboard

    letrend/UVen

    UV irradiation system for enhanced photo-activation in living cells

    210 parts1MIT

Questions

How big is the DRIVE PCB?

It measures 123.7 × 67.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the DRIVE use?

35 parts, built around the AO3401 and DEV-16771. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the DRIVE KiCad files?

From the Sagnik-Tech/Drive-Subsystem-PCB-Design repository on GitHub, at the commit this page was made from: the board is DRIVE.kicad_pcb and its schematic DRIVE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the DRIVE design in my own project?

Its repository states no licence, so its author keeps all rights: ask Sagnik-Tech before reusing the design.