

Motorkit display
CFMoto lightkit mod, driving a lightkit based on engine information read through CAN. This PCB is part of the system responsible for driving a very basic user interface that allows for top level control of the light kit. It uses a ST7739 screen with 4 tactile switches.
- Size
- 74 × 44 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 53
- Pads
- 164
- Tracks, vias
- 229, 40
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 Aug 2025
- Updated
- 15 Aug 2025
Overview
Motorkit display is an open-source printed circuit board by S0L1DDEV, from the S0L1DDEV/motormod-pcb-display repository on GitHub. It is a 4-layer board of 74 × 44 mm with 37 parts on 53 nets, routed with 229 tracks and 40 vias.
It is built around the RP2040, W25Q128JVEIQ and KMR731NGLFS. Its parts include 17 capacitors, 4 switches, 3 ICs, 3 connectors and 2 resistors. It belongs with the lEDs and displays boards and the RP2040 boards of this library.
Main components
3RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVEIQ
WSON-8-EP(6x8)-40℃~+85℃ 100,000 cycles 10uA 128Mbit 133MHz 2.7V~3.6V 20 Years Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection、Power lock protection SPI WSON-8-EP(6x8) NOR FLASH ROHSWinbondNAND FLASHKMR731NGLFS
SMD-4P,4.2x2.8mm-40℃~+85℃ 100,000 cycles 2.5mm 2.8mm 32V 3N 4.6mm 50mA Gull Wing IP67 Round Button SPST-NO Surface Mount,Vertical SMD-4P,4.2x2.8mm Tactile Switches ROHSC&KTactile Switches
README
README.mdmotormod-pcb-display
Display portion of the motorcycle mod
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8, C11 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C9, C10, C15, C17 |
| 4 | KMR731NG_LFS | locallib:KMR731NGLFS | S1, S2, S3, S4 |
| 2 | 15pF | Capacitor_SMD:C_0603_1608Metric | C12, C13 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 2.5A, 40V | Diode_SMD:Nexperia_CFP3_SOD-123W | D1 |
| 1 | 22uF | locallib:CAPAE530X565N | C14 |
| 1 | Crystal_GND24 | locallib:ABM8272T3 | Y1 |
| 1 | Interface | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J2 |
| 1 | LCD | locallib:10P flexcable | J1 |
| 1 | LDK130PU33R_DFN6 | locallib:LDO-6_1.3x1.2mm_P0.4mm | U3 |
| 1 | LOGO | LOGO | G*** |
| 1 | Q_PMOS_Depletion | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U2 |
| 1 | SWD | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | W25Q128JVE | Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm | U1 |
The 33 most common of 37 parts.
Similar boards
- 4 layers83 × 120 mm

- 4 layers128.7 × 63.9 mm

HexControllerV3
TH4R4V3N1324/Hexapod
This repository contains the complete design, control software and documentation for a six-legged walking robot (hexapod).
49 parts - 4 layers50.8 × 25.4 mm

- 4 layers17.8 × 41.9 mm

- 4 layers75 × 55 mm

HIDMorph
cedarhacks/HIDMorph
Hardware/Firmware of HIDMorph, a lua configurable HID translation/generation device
50 parts4 - 2 layers323.9 × 115.5 mm

- 2 layers33.3 × 36.5 mm

Mic
joshitha-c/microphone
A compact USB digital microphone development board built around the Raspberry Pi RP2040 microcontroller and the STMicroelectronics MP34DT05TR-A digital MEMS microphone.
28 parts - 4 layers62.3 × 29.5 mm

Motokit controlsystem v2
S0L1DDEV/motormod-pcb-controlsystem
CFMoto lightkit mod, driving a lightkit based on engine information read through CAN. This PCB is part of the system responsible for reading frames and outputting a animation on a neopixel lightstrip
59 parts
Questions
How big is the Motorkit display PCB?
It measures 74 × 44 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Motorkit display use?
37 parts, built around the RP2040, W25Q128JVEIQ and KMR731NGLFS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Motorkit display KiCad files?
From the S0L1DDEV/motormod-pcb-display repository on GitHub, at the commit this page was made from: the board is motorkit-display/motorkit-display.kicad_pcb and its schematic motorkit-display/motorkit-display.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Motorkit display design in my own project?
Its repository states no licence, so its author keeps all rights: ask S0L1DDEV before reusing the design.