Skip to the content
1234

KMR731NGLFS

C&KExtended

-40℃~+85℃ 100,000 cycles 2.5mm 2.8mm 32V 3N 4.6mm 50mA Gull Wing IP67 Round Button SPST-NO Surface Mount,Vertical SMD-4P,4.2x2.8mm Tactile Switches ROHS

Part id
c-k/KMR731NGLFS
Category
Tactile Switches
Package
SMD-4P,4.2x2.8mm
Pins
4
In stock
7 at JLCPCB (C221695)
Used on
3 open-source boards

Overview

The KMR731NGLFS is a tactile Switche made by C&K in a SMD-4P,4.2x2.8mm package with 4 pins. -40℃~+85℃ 100,000 cycles 2.5mm 2.8mm 32V 3N 4.6mm 50mA Gull Wing IP67 Round Button SPST-NO Surface Mount,Vertical SMD-4P,4.2x2.8mm Tactile Switches ROHS.

PCBKit's library has its KiCad symbol (Switches:PB SPST 12NO-34NO, from CERN's library) and its footprint (Switches:PB_C&K_KMR731NG-LFS, from CERN's library), ready for a KiCad board. 7 are in stock at JLCPCB (part C221695). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

Switches:PB SPST 12NO-34NOFrom CERN's library

Footprint

1234
Switches:PB_C&K_KMR731NG-LFSFrom CERN's library

Pinout

4
The pins of the KMR731NGLFS
PinNameType
11Input/output
22Input/output
33Input/output
44Input/output

Open-source boards using it

3
  • 4 layers83 × 120 mmJd2oscope, the printed circuit board in 3D

    Jd2oscope

    Niftion/jd2oscope

    2CH 1MS/s, 12-Bit, 50kHz Oscope (5V) w/320x240 TFT & ESP32

    61 parts
  • 4 layers74 × 44 mmMotorkit display, the printed circuit board in 3D

    Motorkit display

    S0L1DDEV/motormod-pcb-display

    CFMoto lightkit mod, driving a lightkit based on engine information read through CAN. This PCB is part of the system responsible for driving a very basic user interface that allows for top level control of the light…

    37 parts
  • 4 layers128.7 × 63.9 mmHexControllerV3, the printed circuit board in 3D

    HexControllerV3

    TH4R4V3N1324/Hexapod

    This repository contains the complete design, control software and documentation for a six-legged walking robot (hexapod).

    49 parts

Questions

Is there a KiCad symbol and footprint for the KMR731NGLFS?

Yes. The symbol is Switches:PB SPST 12NO-34NO and the footprint Switches:PB_C&K_KMR731NG-LFS, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the KMR731NGLFS?

SMD-4P,4.2x2.8mm, with 4 pins. Its footprint is drawn on this page.

Where is the KMR731NGLFS datasheet?

C&K publishes it: the Datasheet link on this page opens it.

Where can I order the KMR731NGLFS?

JLCPCB lists it as part C221695, with 7 in stock; the sellers' links on this page open their listings.

Which open-source boards use the KMR731NGLFS?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.