

DigitalProtoBoard
Various Kicad Sketches to test new ideas
- Size
- 204.5 × 66 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 138
- Pads
- 420
- Tracks, vias
- 581, 21
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Dec 2021
- Updated
- 4 Nov 2025
Overview
DigitalProtoBoard is an open-source printed circuit board by RomualdRousseau, from the RomualdRousseau/Kicad repository on GitHub. It is a 2-layer board of 204.5 × 66 mm with 57 parts on 138 nets, routed with 581 tracks and 21 vias.
It is built around the 74HC02, 74HC574D and 74HC74D, with the NE555P and SSB-LXH100SRW among its other parts. Its parts include 15 connectors, 12 ICs, 6 capacitors, 5 resistors and 3 diodes.
Main components
574HC02
-- Logic Gates ROHSonsemiLogic Gates74HC574D
SOP-20L-40℃~+125℃ 1 13ns 15ns@6V,50pF 2.7V~6V 20uA 28MHz 5ns 6.5pF 7.8mA 7.8mA 74HC Series 8 D-Type Enable Rising Edge Tri-State SOP-20L Flip Flops ROHSMDDFlip Flops74HC74D
SOIC-14-40℃~+125℃ 1 15ns 2 2V~6V 3.5pF 37ns@6V,50pF 3ns、3ns、3ns 40uA 5.2mA 5.2mA 74HC Series 82MHz Asynchronous Complementary D-Type Rising Edge Set and Reset SOIC-14 Flip Flops ROHSNexperiaFlip FlopsNE555P
DIP-80℃~+70℃ 100kHz 10mA 4.5V~16V DIP-8 555 Timers / Counters ROHSTexas InstrumentsTimers / CountersSSB-LXH100SRW
插件1.7V 150mcd 30mA 660nm Red 插件 LED Indication - Discrete ROHSLumexLED Indication - Discrete
README
README.mdKicad
Various Kicad Sketches to test new ideas
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H3, H4, H4, H4, H4 |
| 4 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C3, C4, C5, C6 |
| 4 | 10K | Resistor_THT:R_Array_SIP9 | RN1, RN2, RN3, RN4 |
| 4 | 74HC02 | Package_DIP:DIP-14_W7.62mm | U4, U10, U12, U19 |
| 4 | 74HC574 | Package_DIP:DIP-20_W7.62mm | U2, U5, U7, U14 |
| 3 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R5 |
| 3 | 74HC74 | Package_DIP:DIP-14_W7.62mm | U6, U8, U13 |
| 3 | BIN | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4, J6, J10 |
| 3 | LED | LED_THT:LED_D5.0mm | D1, D2, D3 |
| 3 | RIN | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J7, J9, J11 |
| 3 | R_CTRL | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1, J5, J8 |
| 3 | SSB-LXH100SRW | rrDisplay:SSB-LXH100SRW | BAR1, BAR2, BAR3 |
| 2 | 10nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | BOUT | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J13 |
| 1 | CONTROL | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J14 |
| 1 | INPUT | Button_Switch_THT:SW_DIP_SPSTx08_Slide_9.78x22.5mm_W7.62mm_P2.54mm | SW1 |
| 1 | LEDS | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J15 |
| 1 | LOGO | Symbol:VerySmallCow | XiaoNiuNiu |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | POWER | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | PULSE | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | ROUT | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J12 |
| 1 | W_CTRL | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
More from RomualdRousseau/Kicad
3- 2 layers62.2 × 25.9 mm

- 2 layers40.6 × 30.5 mm

- 2 layers21 × 22 mm

Similar boards
- 4 layers188 × 128.3 mm

- 2 layers177.8 × 130.8 mm

- 2 layers208 × 110 mm

- 2 layers299.7 × 198.1 mm

Cisc-8
nailed-barnacle/Cisc-8-ttl-processor
A cut-down version of the 8080 processor using HCTTL and including a discrete ALU and instruction decoder
319 parts1MIT - 2 layers213.1 × 129 mm

- 2 layers200 × 150 mm

- 4 layers209.5 × 108.5 mm

- 2 layers284.9 × 96.5 mm

Questions
How big is the DigitalProtoBoard PCB?
It measures 204.5 × 66 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DigitalProtoBoard use?
57 parts, built around the 74HC02, 74HC574D, 74HC74D and NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DigitalProtoBoard KiCad files?
From the RomualdRousseau/Kicad repository on GitHub, at the commit this page was made from: the board is DigitalProtoBoard/DigitalProtoBoard.kicad_pcb and its schematic Clock20MHz/Clock20MHz.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DigitalProtoBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask RomualdRousseau before reusing the design.