2 layers156.2 × 168.9 mm
LPC176x MultiFunction
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
236 parts24
2 layers105.6 × 73.3 mm
STM32F767ZI LCC PNET Router
RobertPHeller/RPi-RRCircuits24A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
- Size
- 105.6 × 73.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 101
- Pads
- 222
- Tracks, vias
- 239, 41
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 18 Dec 2016
- Updated
- 18 Jan 2026
Overview
STM32F767ZI LCC PNET Router is an open-source printed circuit board by RobertPHeller, from the RobertPHeller/RPi-RRCircuits repository on GitHub. It is a 2-layer board of 105.6 × 73.3 mm with 52 parts on 101 nets, routed with 239 tracks and 41 vias.
It is built around the LM358, AP63205WU and RJ45, with the SB240 among its other parts. Its parts include 10 capacitors, 8 resistors, 8 connectors, 6 diodes and 5 ICs. It belongs with the ESP32 and STM32 boards of this library.
Main components
4
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
AP63205WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.8V~32V 5V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorisedSB240
DO-15UncategorisedLGE
README
16LEDDriver23017SMD/README.md16LEDDriver23017SMD
This is a SMD variant of 16DriverOutputHAT.
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 160 Ohms | Resistor_SMD:R_0603_1608Metric | R201, R202, R301, R302 |
| 4 | 60 Ohms | Resistor_SMD:R_1206_3216Metric | R203, R204, R303, R304 |
| 4 | MountingHole_2-5mm_RevA_Date21Jun2010 | MountingHole_2-5mm_RevA_Date21Jun2010 | MH, MH, MH, MH |
| 2 | .1 uf | Capacitor_SMD:C_0603_1608Metric | C201, C301 |
| 2 | 15 uf 15V | Capacitor_SMD:CP_Elec_4x5.8 | C203, C303 |
| 2 | 22uf | Capacitor_SMD:C_0603_1608Metric | C403, C404 |
| 2 | 47 nf | Capacitor_SMD:C_0603_1608Metric | C202, C302 |
| 2 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U201, U301 |
| 2 | PNET | RJ12Molex:95501-2661 | J302, J303 |
| 2 | RJ45 | RJ45:RJ45_8N-S | J202, J203 |
| 2 | SB240 | Diode_SMD:D_PowerDI-123 | D203, D204 |
| 2 | ST_MORPHO | STMorpho:ST_Morpho | CN7, CN10 |
| 2 | TCAN332DR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U202, U302 |
| 2 | Termination | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J201, J301 |
| 1 | + LCC Power In | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | T202 |
| 1 | + LCC Power Out | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | T201 |
| 1 | + PNet Power In | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | T401 |
| 1 | 100nf | Capacitor_SMD:C_0603_1608Metric | C402 |
| 1 | 10uf | Capacitor_SMD:CP_Elec_5x5.3 | C401 |
| 1 | 4.7uH | Inductor_SMD:L_7.3x7.3_H4.5 | L401 |
| 1 | AP63205 | Package_TO_SOT_SMD:TSOT-23-6 | U401 |
| 1 | LCC | LCCLogo:LCC_LOGO_9x9 | G*** |
| 1 | LCC Rx | LED_SMD:LED_0603_1608Metric | D202 |
| 1 | LCC Tx | LED_SMD:LED_0603_1608Metric | D201 |
| 1 | LOGO | DWSLogos:DWSLogoBCU | G*** |
| 1 | PNET Rx | LED_SMD:LED_0603_1608Metric | D302 |
| 1 | PNET Tx | LED_SMD:LED_0603_1608Metric | D301 |
The 47 most common of 52 parts.
More from RobertPHeller/RPi-RRCircuits
12- 2 layers185.4 × 73.7 mm
FullInterlockingPlantCANPower
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
155 parts24 - 2 layers185.4 × 73.7 mm
FullInterlockingPlantCAN
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
154 parts24 - 2 layers137.2 × 73.7 mm
FullInterlockingPlant
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
128 parts24 - 2 layers128.3 × 139.7 mm
PocketBeagleMultifuntion
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
124 parts24 - 2 layers141 × 146.1 mm
LPC1758-MultiIOBoard
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
119 parts24 - 2 layers141 × 146 mm
LPC1768-MultiIOBoard
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
119 parts24 - 2 layers76.2 × 153.7 mm
TivaMultiFunctionBoard
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
118 parts24 - 2 layers121.9 × 133.4 mm
TivaInterchangeSMD
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
112 parts24 - 2 layers62.2 × 57.1 mm
DCCOD SMD
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
108 parts24 - 2 layers65 × 56 mm
16LEDDriver23017SMD
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
98 parts24 - 2 layers160 × 73.7 mm
YardBoss
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
95 parts24
Similar boards
- 2 layers102.9 × 116.7 mm
PocketBeagleCommandStation
RobertPHeller/CommandStationsAndBoosters
Command Stations and Boosters
133 parts - 4 layers61 × 81 mm
- 2 layers64.8 × 74.5 mm
ReadingLampController
vsi5004/ReadingLampController
A repurposing of my LCC Lighting Controller hardware into a customizable, Matter enabled, RGBW reading lamp
67 parts - 2 layers142.2 × 175.3 mm
6502protoboard
rjhelms/6502proto
A prototyping board for experimenting with 6502 hardware and software design
95 parts2 - 4 layers
RoboRyo
KaitoTLex/RoboRyo
This is team1280's replacement for the Robo Rio for more redundant and less annoying controls.
68 parts1MIT - 2 layers
- 2 layers190 × 110 mm
- 2 layers99.1 × 33 mm
Dcc track UI detection V2
khartinger/RCC5V
Controlling model railroad components with DCC, MQTT and manually
49 parts
Questions
How big is the STM32F767ZI LCC PNET Router PCB?
It measures 105.6 × 73.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the STM32F767ZI LCC PNET Router use?
52 parts, built around the LM358, AP63205WU, RJ45 and SB240. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32F767ZI LCC PNET Router KiCad files?
From the RobertPHeller/RPi-RRCircuits repository on GitHub, at the commit this page was made from: the board is STM32F767ZI_LCC_PNET_Router/STM32F767ZI_LCC_PNET_Router.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32F767ZI LCC PNET Router design in my own project?
Its repository states no licence, so its author keeps all rights: ask RobertPHeller before reusing the design.