

AT HUB Recharged
- Size
- 100 × 55 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 100
- Nets
- 92
- Pads
- 335
- Tracks, vias
- 585, 302
- Pours
- 362
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 May 2025
- Updated
- 25 Aug 2025
Overview
AT HUB Recharged is an open-source printed circuit board by Rehabilitation-Innovation, from the Rehabilitation-Innovation/AT-HUB-Recharged repository on GitHub. It is a 4-layer board of 100 × 55 mm with 100 parts on 92 nets, routed with 585 tracks and 302 vias.
It is built around the ESP32-PICO-DEVKITM-2, TLV61070ADBV and TLP241A(TP1,F, with the BQ21040DBV, BQ27441DRZR-G1A and 1N5819HW-7-F-01 among its other parts. Its parts include 36 resistors, 15 connectors, 14 diodes, 11 switches and 9 ICs. It belongs with the ESP32 and RISC-V boards of this library.
Main components
6ESP32-PICO-DEVKITM-2
-- WiFi Modules ROHSEspressif SystemsWiFi ModulesTLV61070ADBV
SOT-23-6-40℃~+125℃@(TJ) 1 2.2V~5.5V 2.5A 3uA 500mV~5.5V 550kHz、1MHz Adjustable Boost Boost Built-in Yes SOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTLP241A(TP1,F
SMD-4P-20℃~+85℃ 1.27V 2.8ms 2A 300us 40V 5kV 60mΩ 7.5mA One set normally open: 2A (SPST - normally open) SMD-4P Solid State Relays (MOS Output) ROHSToshibaSolid State Relays (MOS Output)BQ21040DBV
SOT-23-60℃~+125℃ 1 125uA 3.5V~28V 4.2V 800mA Charging IC Support SOT-23-6 Battery Management ROHSTexas InstrumentsBattery ManagementBQ27441DRZR-G1A
SON-12-EP(2.5x4)-40℃~+85℃ 1 2.45V~4.5V 4.2V 93uA I2C Lithium Battery Monitoring IC Support Under-voltage lockout SON-12-EP(2.5x4) Battery Management ROHSTexas InstrumentsBattery Management1N5819HW-7-F-01
SOD-123Schottky DiodesDiodes Incorporated
Parts
100| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Resistor_SMD:R_0805_2012Metric | R7, R8, R18, R19, R20, R21, R22, R23, R24, R27, R28 |
| 6 | 1k | Resistor_SMD:R_0805_2012Metric | R6, R11, R12, R13, R14, R15 |
| 6 | D_TVS | Diode_SMD:D_SOD-323_HandSoldering | D11, D12, D13, D14, D15, D16 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R31, R32, R33, R34, R35 |
| 5 | 300R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5 |
| 5 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4, D5 |
| 5 | SW_Push | AT_HUB_R2:SW_800AWSP9M2QE | SW6, SW7, SW8, SW9, SW10 |
| 5 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5 |
| 5 | TLP241A(TP1,F | AT_HUB_R2:11-5B201S_TOS | U2, U3, U4, U5, U6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C4 |
| 2 | 4k7 | Resistor_SMD:R_0805_2012Metric | R16, R17 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric | R25, R26 |
| 2 | BLUE | LED_THT:LED_D5.0mm | D6, D10 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric | R29 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R30 |
| 1 | 100u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C2 |
| 1 | 100u | Capacitor_SMD:C_1206_3216Metric | C3 |
| 1 | 1N5819HW-7-F | Diode_SMD:D_SOD-123 | D9 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 2u2 | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 2u2 | AT_HUB_R2:Ceaiya SMD,6x6mm CR6028-2R2N | L1 |
| 1 | 750k | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 82k | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | BQ21040DBV | Package_TO_SOT_SMD:SOT-23-6 | U7 |
| 1 | BQ27441DRZR-G1A | Package_SON:Texas_S-PDSO-N12 | U10 |
| 1 | ESP32-PICO-DEVKITM-2 | AT_HUB_R2:XCVR_ESP32-PICO-KIT-V4.1 | U1 |
| 1 | EXT Charge Port | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J15 |
| 1 | IN1 | AT_HUB_R2:CUI_MJ-3502 | J8 |
| 1 | IN2 | AT_HUB_R2:CUI_MJ-3502 | J9 |
| 1 | IN3 | AT_HUB_R2:CUI_MJ-3502 | J10 |
| 1 | IN4 | AT_HUB_R2:CUI_MJ-3502 | J11 |
| 1 | IN5 | AT_HUB_R2:CUI_MJ-3502 | J12 |
| 1 | JST | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | LOGO | LOGO | G*** |
| 1 | NTR1P02T1G | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | OUT1 | AT_HUB_R2:CUI_MJ-3502 | J3 |
| 1 | OUT2 | AT_HUB_R2:CUI_MJ-3502 | J4 |
| 1 | OUT3 | AT_HUB_R2:CUI_MJ-3502 | J5 |
| 1 | OUT4 | AT_HUB_R2:CUI_MJ-3502 | J6 |
| 1 | OUT5 | AT_HUB_R2:CUI_MJ-3502 | J7 |
| 1 | Pack Thermister | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J13 |
| 1 | R01 | Resistor_SMD:R_0805_2012Metric | R36 |
| 1 | SW_SPDT | AT_HUB_R2:SW_SLW-121586-5A-D | SW11 |
| 1 | TLV61070ADBV | Package_TO_SOT_SMD:SOT-23-6 | U8 |
| 1 | Through Hole | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J14 |
| 1 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-17 | J16 |
Similar boards
- 4 layers130 × 130 mm

- 4 layers56.3 × 68.4 mm

Test Stand Power Monitor
ekatynski/Test-Stand-Power-Monitor
A small board for cheaply and easily monitoring a motor test stand for a host of data types.
70 parts - 4 layers79.6 × 92.5 mm

WCS1700-Calibrator
ekatynski/WCS1700-Calibrator
A board designed to aid in calibrating six Winson WCS1700 hall effect sensors a the same time.
120 parts - 2 layers54 × 54 mm

- 4 layers150 × 168 mm

Soldered Inkplate 4 TEMPERA with glass panel panel
SolderedElectronics/Soldered-Inkplate-4-TEMPERA-with-glass-panel-hardware-design
Inkplate 4 TEMPERA is an easy-to-use, all-in-one device that puts the power of e-paper technology in the palm of your hand.
1,348 parts5 - 4 layers117 × 69.4 mm

KINO D4 Carrier A0 2
b5463/kino-d4
Open-source four-lens digital camera with synchronized capture, original-frame storage, and a USB control workbench.
256 parts4 - 4 layers85.9 × 50 mm

Logic
FallenBuillder/rfid-nfc-manager
This repository consists of schematics, PCB layouts, code and 3D models for a rfid,nfc manager.
136 parts3MIT - 2 layers26 × 40 mm

Nervous EDA
sensors-inl/Nervous-EDA
ECAD design files, firmware source code and standalone application for the EDA sensor of the Nervous project.
55 parts3MIT
Questions
How big is the AT HUB Recharged PCB?
It measures 100 × 55 mm and has 4 copper layers, 1.6 mm thick.
What parts does the AT HUB Recharged use?
100 parts, built around the ESP32-PICO-DEVKITM-2, TLV61070ADBV, TLP241A(TP1,F and BQ21040DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AT HUB Recharged KiCad files?
From the Rehabilitation-Innovation/AT-HUB-Recharged repository on GitHub, at the commit this page was made from: the board is Hardware/Rev3/AT_HUB_RECHARGED/AT_HUB_RECHARGED.kicad_pcb and its schematic Hardware/Rev3/AT_HUB_RECHARGED/AT_HUB_RECHARGED.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AT HUB Recharged design in my own project?
Its repository states no licence, so its author keeps all rights: ask Rehabilitation-Innovation before reusing the design.