
MetalBird
Rajveer1496/MetalBird
A Drone made entirely from scratch. From PCB design and body to own Firmware.

A Drone made entirely from scratch. From PCB design and body to own Firmware.
MetalBird v2.kicad pro is an open-source printed circuit board by Rajveer1496, from the Rajveer1496/MetalBird repository on GitHub. It is a 2-layer board of 38 × 38 mm with 67 parts on 79 nets, routed with 607 tracks and 92 vias.
It is built around the BMP280, AMS1117-3.3 and MPU-6050. Its parts include 28 capacitors, 22 resistors, 6 connectors, 4 ICs and 2 diodes. It belongs with the STM32 boards of this library.
Top Layer
|
|
|
Bottom Layer
|
|
|
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4, C6, C8, C16, C22, C23, C25 |
| 4 | 22µF | Capacitor_SMD:C_1206_3216Metric | C2, C2A1, C14, C19 |
| 3 | 10kΩ | Resistor_SMD:R_0603_1608Metric | R2, R4, R6 |
| 3 | 4.7 K | Resistor_SMD:R_0603_1608Metric | R15, R16, R17 |
| 2 | 0.1 microF | Capacitor_SMD:C_0603_1608Metric | C18, C20 |
| 2 | 150 | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | 20pF | Capacitor_SMD:C_0603_1608Metric | C10, C12 |
| 2 | 300kΩ | Resistor_SMD:R_0603_1608Metric | R1, R10 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 1 | 0.1µF | Capacitor_SMD:C_0603_1608Metric | C1A1 |
| 1 | 10 nF | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 100microF | Capacitor_SMD:C_1206_3216Metric | C24 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 10pF | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 180Ω | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 18kΩ | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 1microF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 1μF | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 2.2 nF | Capacitor_SMD:C_0603_1608Metric | C21 |
| 1 | 2.2nF | Capacitor_SMD:C_0603_1608Metric | C26 |
| 1 | 2.2µH | Inductor_SMD:L_Cenker_CKCS4018 | L1 |
| 1 | 2.2μF | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 200 | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 20K | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 20ohm | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 22K | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 22kΩ | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 3.3K | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 4.7kΩ | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 4.7nF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 5.6K | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 7.5kΩ | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 8MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BMP280 | Package_LGA:Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U4 |
| 1 | Camera Conn | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | Conn_01x08 | Connector_JST:JST_SH_BM08B-SRSS-TB_1x08-1MP_P1.00mm_Vertical | J3 |
| 1 | ELRS Reciver | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U3 |
| 1 | PMOS | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | STM32F411CEUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | SW_Push_Open | Button_Switch_SMD:SW_SPST_PTS645Sx43SMTR92 | SW1 |
| 1 | USB/UART DEBUG | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | VTX Conn | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | ~ | Package_TO_SOT_SMD:SOT-583-8 | MP2331H1 |

Rajveer1496/MetalBird
A Drone made entirely from scratch. From PCB design and body to own Firmware.


alihaanc/SKYKILLER-Development-Board
Drone and Rocket Development PCB board

syeedameen/miniflight
Budget Flight Controller for Drones with ATmega328P Microcontroller

mohamedyanis/BaroAxel-Brain
STM32L0 MCU based PCB for Industrial Instrumentation Applications designed using KiCad.

sushs0305-arch/Flight-Controller-PCB-Design-using-STM32
Custom 2-layer flight controller PCB designed using KiCad based on the STM32F405RGTx microcontroller for drone and embedded robotics applications.

Tiladura/RocketFlightController
And there is a bunch of capacitors, resistors, some buttons which are all used on a single custom PCB, all parts of which i will list in BOM list in the end.

Ferid10/STM32F103C8T6-design
my pcb design where i made a stm 32 board with temprature and pressure sensor using both spi and i2c communication

PeriwalPratham/FlightController
A basic PCB design which contains all components for a solo yet affordable basic drone controller
It measures 38 × 38 mm and has 2 copper layers, 1.6 mm thick.
67 parts, built around the BMP280, AMS1117-3.3 and MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Rajveer1496/MetalBird repository on GitHub, at the commit this page was made from: the board is MetalBird_v2/MetalBird_v2.kicad_pro.kicad_pcb and its schematic MetalBird/MetalBird.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Rajveer1496 before reusing the design.