Skip to the content
2 layers50 × 50 mmFlight Controller, the printed circuit board in 3D

Custom 2-layer flight controller PCB designed using KiCad based on the STM32F405RGTx microcontroller for drone and embedded robotics applications.

Size
50 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
44
Nets
95
Pads
224
Tracks, vias
686, 94
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
21 May 2026
Updated
21 May 2026

Overview

Flight Controller is an open-source printed circuit board by sushs0305-arch, from the sushs0305-arch/Flight-Controller-PCB-Design-using-STM32 repository on GitHub. It is a 2-layer board of 50 × 50 mm with 44 parts on 95 nets, routed with 686 tracks and 94 vias.

It is built around the BMP280, AMS1117-3.3 and MPU-6050, with the USBLC6-2P6 among its other parts. Its parts include 15 capacitors, 7 resistors, 6 ICs, 6 connectors and 4 diodes. It belongs with the robots and motor control boards and the STM32 boards of this library.

Main components

4

README

README.md

Flight-Controller-PCB-Design-using-STM32

Custom 2-layer flight controller PCB designed using KiCad based on the STM32F405RGTx microcontroller for drone and embedded robotics applications. STM32 Flight Controller PCB

STM32 Flight Controller PCB

Overview

A custom STM32-based flight controller PCB designed for drone and embedded robotics applications using a compact 2-layer architecture. The board integrates motion sensing, GPS communication, compass and barometer support, USB connectivity, power regulation, and debugging interfaces for real-time embedded control systems.


System Architecture

The flight controller includes:

Processing Unit

  • STM32F405RGTx microcontroller
  • High-performance ARM Cortex-M4 core
  • Real-time sensor processing and control

Motion Sensing Unit

  • MPU6050 IMU
    • Accelerometer
    • Gyroscope
  • Sensor fusion support for orientation tracking

Navigation Support

  • GPS module interface
    • GPS_RX
    • GPS_TX
  • Compass interface support
  • Barometer interface support for altitude sensing

Communication Interfaces

  • USB communication interface
  • SWD debugging header
  • I2C communication support
  • UART communication support

Power Management

  • AMS1117-3.3V regulator
  • Ferrite bead filtering
  • Decoupling capacitors
  • Stable power distribution network

PCB Design

Design Features

  • Compact 2-layer PCB
  • Optimized signal routing
  • Ground plane implementation
  • DRC verified layout
  • Mounting hole support
  • Sensor-oriented placement strategy

Design Tools

  • KiCad
  • STM32
  • Embedded Hardware Design

Project Gallery

Schematic Design

(Screenshot 2026-05-20 222307 )

PCB Layout

(Screenshot 2026-05-20 222340 )

3D PCB View

(Screenshot 2026-05-20 222307 )


Working Principle

The STM32 microcontroller collects real-time motion and navigation data from the IMU, GPS, compass, and barometer interfaces. The processed sensor data can be used for stabilization, navigation, orientation estimation, and autonomous control in drone and robotics systems.


System Design Advantages

Compact Design

  • Small form factor suitable for embedded applications

Modular Interfaces

  • Easy integration with external sensors and modules

Expandability

  • Supports additional peripherals through UART and I2C

Reliable Power Design

  • Stable 3.3V regulation and filtered supply rails

Debugging Support

  • SWD interface for firmware development and testing

Applications

  • Drone Flight Controllers
  • Robotics Systems
  • Autonomous Navigation Systems
  • Embedded Sensor Fusion Projects

Parts

44
QtyValueFootprintReferences
70.1uFCapacitor_SMD:C_0603_1608MetricC8, C9, C10, C11, C12, C13, C15
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
3330Resistor_SMD:R_0603_1608MetricR3, R6, R7
3LEDLED_SMD:LED_0603_1608MetricD1, D3, D4
210KResistor_SMD:R_0603_1608MetricR1, R2
210uFCapacitor_SMD:C_0603_1608MetricC3, C4
22.2uFCapacitor_SMD:C_0603_1608MetricC6, C7
222pFCapacitor_SMD:C_0603_1608MetricC2, C5
24.7KResistor_SMD:R_0603_1608MetricR4, R5
1100uFCapacitor_SMD:C_0603_1608MetricC1
12.2nFCapacitor_SMD:C_0603_1608MetricC16
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1BATTERY CONNECTORConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ8
1BMP280Package_LGA:Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumberingU4
1CP2102N-Axx-xQFN20Package_DFN_QFN:SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mmU3
1CrystalCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1ESD5ZxxDiode_SMD:D_SOD-523D2
1FerriteBeadInductor_SMD:L_0805_2012MetricFB1
1GPS HEADERConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ5
1I2C_COMPASSConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1MPU-6050Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mmU6
1PWM OUTPUTConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1STM32F405RGTxPackage_QFP:LQFP-64_10x10mm_P0.5mmU1
1SWD HEADERConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ4
1USBLC6-2P6Package_TO_SOT_SMD:SOT-666U5
1USB_B_MicroConnector_USB:USB_Micro-B_Molex-105017-0001J6

Similar boards

  • 2 layers50 × 63 mmZenith Development Board, the printed circuit board in 3D

    Zenith Development Board

    zenitheesc/Zenith-Development-Board

    The Zenith Development Board was developed to serve as a first project for the new members of the group.

    69 parts3MIT
  • 4 layers71.4 × 80.3 mmEx2, the printed circuit board in 3D

    Ex2

    zaidhajji/Custom-Flight-Controller-Design-STM32F407-KiCad

    Designed a custom flight controller board from schematic to layout: STM32F407VGTx MCU, MPU6050 IMU, BMP280 barometer, MicroSD logging, 6 servo/ESC outputs, and dual-stage power regulation.

    93 parts
  • 2 layers96.6 × 100 mmQuadRaptor, the printed circuit board in 3D

    QuadRaptor

    abdosalem490/QuadRaptor

    148 parts2MIT
  • 4 layers62.2 × 54.6 mmFlight ControllerV1.0, the printed circuit board in 3D

    Flight ControllerV1.0

    alihaanc/SKYKILLER-Development-Board

    Drone and Rocket Development PCB board

    59 parts2
  • 2 layers38 × 38 mmMetalBird v2.kicad pro, the printed circuit board in 3D

    MetalBird v2.kicad pro

    Rajveer1496/MetalBird

    A Drone made entirely from scratch. From PCB design and body to own Firmware.

    67 parts2
  • 2 layers45 × 45 mmAVR FLIGHT CONTROLLER, the printed circuit board in 3D

    AVR FLIGHT CONTROLLER

    syeedameen/miniflight

    Budget Flight Controller for Drones with ATmega328P Microcontroller

    65 parts2GPL-3.0
  • 4 layers50 × 50 mmBaroAxel Brain, the printed circuit board in 3D

    BaroAxel Brain

    mohamedyanis/BaroAxel-Brain

    STM32L0 MCU based PCB for Industrial Instrumentation Applications designed using KiCad.

    50 parts1BSD-3-Clause
  • 2 layers63 × 62 mmRocketFlightController, the printed circuit board in 3D

    RocketFlightController

    Tiladura/RocketFlightController

    And there is a bunch of capacitors, resistors, some buttons which are all used on a single custom PCB, all parts of which i will list in BOM list in the end.

    25 parts1

Questions

How big is the Flight Controller PCB?

It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Flight Controller use?

44 parts, built around the BMP280, AMS1117-3.3, MPU-6050 and USBLC6-2P6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Flight Controller KiCad files?

From the sushs0305-arch/Flight-Controller-PCB-Design-using-STM32 repository on GitHub, at the commit this page was made from: the board is Source files/Flight_Controller.kicad_pcb and its schematic Source files/Flight_Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Flight Controller design in my own project?

Its repository states no licence, so its author keeps all rights: ask sushs0305-arch before reusing the design.