

Load automatisation
- Size
- 263.4 × 251.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 131
- Nets
- 254
- Pads
- 677
- Tracks, vias
- 1,794, 154
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 26 Mar 2025
- Updated
- 28 Jul 2026
Overview
Load automatisation is an open-source printed circuit board by RPT21, from the RPT21/TENG_Loads_PCB repository on GitHub. It is a 2-layer board of 263.4 × 251.4 mm with 131 parts on 254 nets, routed with 1,794 tracks and 154 vias.
It is built around the INA128U, TBD62083AFG,EL and AMS1117-5.0, with the IMC03TS and V23079C1103B301 among its other parts. Its parts include 48 switches, 20 capacitors, 14 ICs, 12 resistors and 7 connectors.
Main components
5INA128U
SOIC-8-18V~-2.25V、2.25V~18V -40℃~+85℃ 1 10uV 130dB 200nV/℃ 2nA 30pA/℃ 4.5V~36V 4V/us 5nA 6mA 700uA 7us 8nV/√Hz@1kHz External resistor gain、Overvoltage protection Single-Ended SOIC-8 Instrumentation Amplifiers ROHSTexas InstrumentsInstrumentation AmplifiersTBD62083AFG,EL
SOP-18-300mil-40℃~+85℃ 0.1mA 1uA 1uA 2V 30V 50V 8 SOP-18-300mil Darlington Transistor Arrays ROHSToshibaPower Distribution SwitchesAMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsIMC03TS
DIP-8P,10x6mm5 A set of conversions: 1C (Single-pole Double-throw Conversion) DIP-8P,10x6mm Signal Relays ROHSTE ConnectivitySignal RelaysV23079C1103B301
插件-40℃~+85℃ 12V 2 Form C: 2C (DPDT-CO) 220V@DC、250V@AC 2A 4ms 4ms AgNi + Gold plated Single Coil Plugin Magnetic Latching Relays ROHSTE ConnectivityMagnetic Latching Relays
Parts
131| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | IMC03TS | Library:IMC03TS | K10, K14, K15, K16, K22, K23, K24, K25, K26, K30, K31, K32, K38, K39, K40, K41 +8 |
| 24 | V23079C1103B301 | Library:V23079A1001B301 | K1, K2, K3, K11, K12, K13, K17, K18, K19, K20, K21, K27, K28, K29, K33, K34 +8 |
| 16 | 100nF | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C17, C18, C19, C20 |
| 6 | 100k | Resistor_SMD:R_0805_2012Metric | R7, R8, R9, R10, R11, R12 |
| 6 | R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6 |
| 6 | TBD62083AFG | Library:SOIC127P1030X245-18N | IC2, IC3, IC6, IC7, IC8, IC10 |
| 4 | MountingHole | MountingHole:MountingHole_5.3mm_M5 | H1, H2, H3, H4 |
| 3 | 1757242 | Library:1757242 | J2, J3, J13 |
| 3 | 74HC238D,653 | Library:74HC238D653 | IC4, IC5, IC11 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C1, C15 |
| 2 | 22uF | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C2, C16 |
| 2 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1, U3 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | TENG_Connector1, TENG_Connector2 |
| 1 | 1757349 | Library:SHDRRA12W103P0X508_1X12_6296X1200X875P | J30 |
| 1 | INA128 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Load 0 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_0 |
| 1 | Load 1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_1 |
| 1 | Load 10 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_10 |
| 1 | Load 11 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_11 |
| 1 | Load 12 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_12 |
| 1 | Load 13 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_13 |
| 1 | Load 14 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_14 |
| 1 | Load 15 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_15 |
| 1 | Load 16 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_16 |
| 1 | Load 17 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_17 |
| 1 | Load 18 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_18 |
| 1 | Load 19 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_19 |
| 1 | Load 2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_2 |
| 1 | Load 20 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_20 |
| 1 | Load 21 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_21 |
| 1 | Load 22 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_22 |
| 1 | Load 23 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_23 |
| 1 | Load 3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_3 |
| 1 | Load 4 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_4 |
| 1 | Load 5 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_5 |
| 1 | Load 6 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_6 |
| 1 | Load 7 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_7 |
| 1 | Load 8 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_8 |
| 1 | Load 9 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Load_9 |
| 1 | OPA145IDBVT | Library:SOT95P280X145-5N | IC9 |
| 1 | OPA2145IDR | Library:SOIC127P600X175-8N | IC1 |
| 1 | PH-2X05SG | SamacSys_Parts:HDRV10W66P254_2X5_1270X500X895P | J12 |
| 1 | PowerIn | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | PowerNeg | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
More from RPT21/TENG_Loads_PCB
3Similar boards
- 2 layers263.4 × 251.4 mm

- 2 layers98 × 89.6 mm

- 4 layers80 × 100 mm

- 2 layers100 × 80 mm

- 2 layers159.9 × 119.9 mm

- 2 layers168 × 134 mm

- 2 layers68.6 × 53.3 mm

- 2 layers70.1 × 50 mm

Questions
How big is the Load automatisation PCB?
It measures 263.4 × 251.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Load automatisation use?
131 parts, built around the INA128U, TBD62083AFG,EL, AMS1117-5.0 and IMC03TS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Load automatisation KiCad files?
From the RPT21/TENG_Loads_PCB repository on GitHub, at the commit this page was made from: the board is TENG_Loads_PCB/Old_PCB/load_automatisation.kicad_pcb and its schematic Loads_Connector_PCB/load.pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Load automatisation design in my own project?
Its repository states no licence, so its author keeps all rights: ask RPT21 before reusing the design.

