Skip to the content
PCBKitNew board
INA128U on a board, in 3D

INA128U

Texas Instruments

-18V~-2.25V、2.25V~18V -40℃~+85℃ 1 10uV 130dB 200nV/℃ 2nA 30pA/℃ 4.5V~36V 4V/us 5nA 6mA 700uA 7us 8nV/√Hz@1kHz External resistor gain、Overvoltage protection Single-Ended SOIC-8 Instrumentation Amplifiers ROHS

Extended
DatasheetJLCPCBLCSCti/INA128U
Category
Instrumentation Amplifiers
Package
SOIC-8
Pins
8

Overview

The INA128U is an instrumentation Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. -18V~-2.25V、2.25V~18V -40℃~+85℃ 1 10uV 130dB 200nV/℃ 2nA 30pA/℃ 4.5V~36V 4V/us 5nA 6mA 700uA 7us 8nV/√Hz@1kHz External resistor gain、Overvoltage protection Single-Ended SOIC-8 Instrumentation Amplifiers ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Instrumentation:INA128, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 84 are in stock at JLCPCB (part C2872992). 38 open-source boards in 28 repositories on GitHub use it.

Symbol

Rg1-2+3V-4Ref56V+7Rg8
Amplifier_Instrumentation:INA128From KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Parameters

17
Common Mode Rejection Ratio(CMRR)
130dB
Dual Supply
-18V~-2.25V
Features
Overvoltage Protection
Ib - Input Bias Current
2nA
Input Offset Current Drift (Ios TC)
30pA/℃
Input Offset Current(Ios)
5nA
Input Offset Voltage Drift(Vos TC)
200nV/℃
Input Voltage Noise Density
8nV/√Hz@1kHz
Number of Channels
Single-channel
Operating Temperature
-40℃~+85℃
Output Current
6mA
Output Type
Single-Ended
Quiescent Current(Iq)
700uA
Settling time
7us
Single Supply
4.5V~36V
Slew Rate
4V/us
Vos - Input Offset Voltage
10uV

Order codes

1

Pinout

8
The pins of the INA128U
PinNameType
1RgPassive
2-Input
3+Input
4V-Power in
5RefInput
6—Output
7V+Power in
8RgPassive

Open-source boards using it

All 38
  • 2 layers70.1 × 50 mmAmp board, the printed circuit board in 3D

    Amp board

    logical/telepathy

    Telepathy is a wireless eeg device.

    35 parts10
  • 2 layers182.9 × 83.8 mmSchematic3, the printed circuit board in 3D

    Schematic3

    alberto-battistel/Teensy-EIS

    Transform your teensy 3.6 (pjrc.com) into an instrument for electrochemical impedance spectroscopy.

    37 parts6GPL-3.0
  • 2 layers100 × 70 mmCPU Board, the printed circuit board in 3D

    CPU Board

    jsjolund/sailoraid

    Sensor package for the Laser Pico sail boat

    116 parts3
  • 2 layers85 × 55 mmFinal schematics, the printed circuit board in 3D

    Final schematics

    shreenandansonu/Electronic-Stethescope

    EKOBIT is an electronics stethoscope, a AFE signal board for a digital stethoscope.

    59 parts3MIT
  • 2 layers41.9 × 22 mmModular Filter 603 kicad, the printed circuit board in 3D

    Modular Filter 603 kicad

    TZeng0698/Portable-EEG-with-Modular-Pre-Filtering-for-BCI-Applications

    A Low-cost EEG BCI implementation with modular filtering card and ADS1298. The repo contains the PCB files and a guide to design your own(in progress).

    42 parts3
  • 2 layers69.5 × 25 mmB3.1, the printed circuit board in 3D

    B3.1

    Neurotechnology-Exploration-Team/Psylink-NXT

    This is intended as a human input device (like a keyboard) that predicts your intention from muscle signals. Using a neural network, trained through a process where you press keys at the exact same time that you make…

    56 parts2GPL-3.0
  • 2 layers90 × 100 mmFonte corrente bipolar V01, the printed circuit board in 3D

    Fonte corrente bipolar V01

    Pinheirogustavo/PCB_projects

    O gerador de sinais é baseado no AD9850. São gerados dois sinais senoidais e dois sinais quadrados, com banda de frequência entre 1 Hz e 40 MHz.

    56 parts2
  • 4 layers200 × 142.3 mmFRED Electrical Scheme KiCAD, the printed circuit board in 3D

    FRED Electrical Scheme KiCAD

    GiulianoAgostini04/FRED-Project

    Real-time concentration monitoring system based on frontal-lobe EEG signals. Features a custom PCB designed with TinkerCAD and KiCad, OpenBCI Ganglion and Arduino UNO for signal acquisition, display, and frequency-band…

    93 parts1MIT

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/ti/INA128U" title="INA128U in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/ti/INA128U.jpg" alt="INA128U" width="1200" height="900">
A picture that opens the part, for a README
[![INA128U](https://pcbkit.io/embed/parts/ti/INA128U.jpg?size=s)](https://pcbkit.io/parts/ti/INA128U)

Questions

Is there a KiCad symbol and footprint for the INA128U?

Yes. The symbol is Amplifier_Instrumentation:INA128 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the INA128U?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the INA128U datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the INA128U?

JLCPCB lists it as part C2872992, with 84 in stock; the sellers' links on this page open their listings.

What can replace the INA128U?

Parts like it in the library: the INA128UA/2K5 by Texas Instruments, the INA821ID by Texas Instruments, the INA826AID by Texas Instruments and the INA849D by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the INA128U?

38 boards in 28 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8