

Braille Evaluation
- Size
- 98 × 89.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 125
- Pads
- 468
- Tracks, vias
- 1,238, 183
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 13 Oct 2026
- Updated
- 13 Oct 2026
Overview
Braille Evaluation is an open-source printed circuit board by phutruonnttn, from the phutruonnttn/braille-setup repository on GitHub. It is a 2-layer board of 98 × 89.6 mm with 90 parts on 125 nets, routed with 1,238 tracks and 183 vias.
It is built around the 74HC238D, TBD62083AFG,EL and LM317, with the TBD62783AFG,EL among its other parts. Its parts include 56 diodes, 7 ICs, 6 capacitors, 3 connectors and 2 resistors.
Main components
474HC238D
SOP-16SOP-16 Signal Switches, Multiplexers, Decoders ROHSMDDSignal Switches, Multiplexers, DecodersTBD62083AFG,EL
SOP-18-300mil-40℃~+85℃ 0.1mA 1uA 1uA 2V 30V 50V 8 SOP-18-300mil Darlington Transistor Arrays ROHSToshibaPower Distribution SwitchesLM317
SOT-223-40℃~+85℃@(Ta) 0.003%Vout 1 1.3V~37V 1A 40V 80dB@(120Hz) Adjustable Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJSMSEMIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTBD62783AFG,EL
SOP-18-300mil-40℃~+85℃ 0.1mA 1uA 1uA 2V 30V 8 SOP-18-300mil Darlington Transistor Arrays ROHSToshibaPower Distribution Switches
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 56 | 200mA/70V | SOT23-3 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +40 |
| 8 | BRAILLE-6 | BRAILLE-6 | U$1, U$2, U$3, U$4, U$5, U$6, U$7, U$8 |
| 5 | 0.1uF | 0603 | C1, C2, C3, C4, C5 |
| 4 | 74HC238D | SOIC127P600X175-16N | IC2, IC3, IC5, IC6 |
| 2 | 1X02 | J2, J3 | |
| 2 | TBD62083AFG | SO18 | IC1, IC4 |
| 2 | TBD62783AFG,EL | SOIC127P1030X245-18N | Q1, Q2 |
| 1 | dummyfp1 | UNK_HOLE_1 | |
| 1 | dummyfp2 | UNK_HOLE_2 | |
| 1 | dummyfp3 | UNK_HOLE_3 | |
| 1 | dummyfp0 | UNK_HOLE_0 | |
| 1 | 1k | 3362P | R1 |
| 1 | 1uf | 0603 | C6 |
| 1 | 240R | 0603 | R3 |
| 1 | LM317 | SOT223 | U2 |
| 1 | NANO | NANO | U$9 |
| 1 | OSHW-LOGOL-COPPER | OSHW-LOGO-L_COPPER | LOGO1 |
| 1 | POWER_JACKSLT | POWER_JACK_SLOT | J1 |
More from phutruonnttn/braille-setup
1- 2 layers7.6 × 29.7 mm

Similar boards
- 2 layers100 × 80 mm

- 2 layers68.6 × 53.3 mm

- 2 layers120.4 × 100.4 mm

Relaymux
PetteriAimonen/relaymux
Hardware and firmware for a USB connected relay box
59 parts18BSD-2-Clause - 2 layers70 × 100 mm

EKIO DQx16
Konstantin-Dudersky/plc-modules
После открыть файл в Inkscape и изменить размер страницы
24 parts - 4 layers80 × 100 mm

- 2 layers263.4 × 251.4 mm

- 2 layers159.9 × 119.9 mm

- 2 layers168 × 134 mm

Questions
How big is the Braille Evaluation PCB?
It measures 98 × 89.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Braille Evaluation use?
90 parts, built around the 74HC238D, TBD62083AFG,EL, LM317 and TBD62783AFG,EL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Braille Evaluation KiCad files?
From the phutruonnttn/braille-setup repository on GitHub, at the commit this page was made from: the board is pcb-audit/vn-update-2026-10-13/source/Braille-Evaluation.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Braille Evaluation design in my own project?
Its repository states no licence, so its author keeps all rights: ask phutruonnttn before reusing the design.