

Load.pcb
- Size
- 24 × 26 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 6
- Pads
- 15
- Tracks, vias
- 19, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 26 Mar 2025
- Updated
- 28 Jul 2026
Overview
Load.pcb is an open-source printed circuit board by RPT21, from the RPT21/TENG_Loads_PCB repository on GitHub. It is a 2-layer board of 24 × 26 mm with 7 parts on 6 nets, routed with 19 tracks and 0 vias.
Its parts include 6 resistors and 1 connector.
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | R | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R5, R6 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J1 |
| 1 | R | Resistor_THT:R_Axial_DIN0614_L14.3mm_D5.7mm_P20.32mm_Horizontal | R1 |
More from RPT21/TENG_Loads_PCB
3- 2 layers263.4 × 251.4 mm

- 2 layers263.4 × 251.4 mm

- 2 layers34.5 × 26.2 mm

Similar boards
- 2 layers

Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT - 2 layers40 × 20 mm

- 2 layers19.8 × 30 mm

- 2 layers35.6 × 58.2 mm

Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm

- 2 layers26 × 44 mm

Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm

Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers

Questions
How big is the Load.pcb PCB?
It measures 24 × 26 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Load.pcb use?
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Load.pcb KiCad files?
From the RPT21/TENG_Loads_PCB repository on GitHub, at the commit this page was made from: the board is Loads_Connector_PCB/load.pcb.kicad_pcb and its schematic Loads_Connector_PCB/load.pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Load.pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask RPT21 before reusing the design.