
Plinkyblack hwmidi jacks
plinkysynth/plinky_public
a public release of the plinky sw and hw

Quickfeather expansion board duo is an open-source printed circuit board by QuickLogic-Corp, from the QuickLogic-Corp/quickfeather-expansion-board-duo repository on GitHub. It is a 2-layer board of 149.9 × 77.5 mm with 28 parts on 121 nets, routed with 431 tracks and 6 vias.
It is built around the LIS2DH12 and VM3011-U1.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MPAD | H1, H2, H3, H4 |
| 1 | Calaveras | quicklogicBoards-footprints:2x6_Conn | J9 |
| 1 | D3P3V | quicklogicBoards-footprints:1x2_Conn | J20 |
| 1 | DEMO | quicklogicBoards-footprints:1x2_Conn | J23 |
| 1 | D_UART | quicklogicBoards-footprints:1x4_Conn | J3 |
| 1 | EXT | quicklogicBoards-footprints:1x2_Conn | J21 |
| 1 | GND | quicklogicBoards-footprints:1x4_Conn | J16 |
| 1 | H3P3V | quicklogicBoards-footprints:1x2_Conn | J19 |
| 1 | H3V | quicklogicBoards-footprints:1x2_Conn | J22 |
| 1 | HUZZAH32-QWIIC | quicklogicBoards-footprints:huzzah32 | J8 |
| 1 | H_UART | quicklogicBoards-footprints:1x4_Conn | J2 |
| 1 | LIS2DH12 | quicklogicBoards-footprints:1x6_Conn | J6 |
| 1 | PMOD | quicklogicBoards-footprints:2x6_Conn | J10 |
| 1 | QF DEVICE | quicklogicBoards-footprints:quickfeather | J4 |
| 1 | QF HOST | quicklogicBoards-footprints:quickfeather | J1 |
| 1 | SCL0_PU | quicklogicBoards-footprints:1x4_Conn | J15 |
| 1 | SCL1 | quicklogicBoards-footprints:1x4_Conn | J14 |
| 1 | SCL1_PU | quicklogicBoards-footprints:1x4_Conn | J12 |
| 1 | SDA0_PU | quicklogicBoards-footprints:1x4_Conn | J18 |
| 1 | SDA1 | quicklogicBoards-footprints:1x4_Conn | J17 |
| 1 | SDA1_PU | quicklogicBoards-footprints:1x4_Conn | J13 |
| 1 | UDA1334 | quicklogicBoards-footprints:uda1334 | J5 |
| 1 | VM3011 | quicklogicBoards-footprints:2x5_Conn | J11 |
| 1 | eSPI_Sensor | quicklogicBoards-footprints:1x6_pinhead | J7 |
| 1 | ql_logo | quicklogicBoards-footprints:Ql_logo | N1 |

plinkysynth/plinky_public
a public release of the plinky sw and hw


peterisza/mobilecg
MobilECG II is an open source clinical grade Holter ECG. For more information, please visit http://mobilecg.hu.

golioth/ostentus-hw
A PCB front panel for Golioth's Aludel hardware platform


OpenAVNS/OpenAVNS
Hardware, firmware, and mechanical design

htmicron/thirdpartyHT32SX
Third party contributions to HT32SX (https://github.com/htmicron/ht32sx)

It measures 149.9 × 77.5 mm and has 2 copper layers, 1.6 mm thick.
28 parts, built around the LIS2DH12 and VM3011-U1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the QuickLogic-Corp/quickfeather-expansion-board-duo repository on GitHub, at the commit this page was made from: the board is quickfeather-expansion-board-duo.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask QuickLogic-Corp before reusing the design.