2 layers61 × 51.3 mm
PTLino shield
PostTenebrasLab/PTL-ino
The PTL-ino (“petilino”) is a *uino-compatbile board that is fully made of easily solderable through-hole components.
9 parts
2 layers61 × 51.3 mm
PTLino
PostTenebrasLab/PTL-inoThe PTL-ino (“petilino”) is a *uino-compatbile board that is fully made of easily solderable through-hole components.
- Size
- 61 × 51.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 46
- Pads
- 153
- Tracks, vias
- 444, 33
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 14 Nov 2015
- Updated
- 20 Jan 2017
Overview
PTLino is an open-source printed circuit board by PostTenebrasLab, from the PostTenebrasLab/PTL-ino repository on GitHub. It is a 2-layer board of 61 × 51.3 mm with 37 parts on 46 nets, routed with 444 tracks and 33 vias.
It is built around the ATMEGA328-PU, PIC16F1455-I/P and LM7805, with the MCP1702-3302E/CB and JUMPER3 among its other parts. Its parts include 9 capacitors, 8 connectors, 4 ICs, 3 resistors and 1 diode. It belongs with the AVR (ATmega, ATtiny) and PIC boards of this library.
Main components
5
ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
PIC16F1455-I/P
PDIP-14-40℃~+85℃ 10bit 14KB 1KB 2.3V~5.5V 48MHz 5bit 8 8 Bit Built-in FLASH PIC PDIP-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LM7805
TO-2630℃~+125℃ 1 1A 20V 2V 42uV 5V 62dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MCP1702-3302E/CB
SOT-23A-3-40℃~+125℃@(Tj) 1 13.2V 250mA 3.3V 44dB@(100Hz) 5uA 725mV@(250mA) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23A-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsJUMPER3
HDR-TH_3P-P2.54-L7.6-W2.5HDR-TH-3P-2.54mm New Arrivals ROHSWürth ElektronikUncategorised
README
README.mdPTL-ino
The PTL-ino (“petilino”) is a *uino-compatbile board that is fully made of easily solderable through-hole components.
You can find more general information at http://ptl-ino.com
The current Kicad file were made with Kicad 4.0.2, so please upgrade to Kicad 4 if you haven't already. The Gerber file are there in case you simply want to order PCB directly to service like OSHPark or DirtyPCB.
If you plan to sell board based on this design, you have to remove our logo from the PCB.
PTL-ino board is licensed with Creative Common BY-SA 4.0 (https://creativecommons.org/licenses/by-sa/4.0/)
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | PTL-ino:C1 | C2, C4, C6, C7 |
| 4 | VAL** | PTL-ino:mounting-hole-3mm | mouting hole 3mm, mouting hole 3mm, mouting hole 3mm, mouting hole 3mm |
| 2 | 10u | PTL-ino:C1V7H | C1, C8 |
| 2 | 4k7 | Discret:R3-5 | R2, R3 |
| 2 | CONN_6 | PTL-ino:SIL-6 | P6, P7 |
| 2 | JUMPER | PTL-ino:solder-jumper-2 | JP2, JP3 |
| 1 | PTL-ino:PTL_mini | ||
| 1 | PTL | ||
| 1 | 100n | C1 | C5 |
| 1 | 10u | PTL-ino:C1_pol | C9 |
| 1 | 220 | R3-5 | R1 |
| 1 | 220n | PTL-ino:C1 | C3 |
| 1 | ATmega328 | PTL-ino:DIP-28__300_ELL | U2 |
| 1 | CONN_10 | SIL-10 | P3 |
| 1 | CONN_3X2 | pin_array_3x2 | P5 |
| 1 | CONN_5 | USB-mini-TH | P8 |
| 1 | CONN_6 | SIL-6 | P2 |
| 1 | CONN_8 | PTL-ino:SIL-8 | P4 |
| 1 | CONN_8 | SIL-8 | P1 |
| 1 | F_Small | PTL-ino:F1 | F1 |
| 1 | JUMPER3 | solder-jumper-3 | JP1 |
| 1 | LED | LEDV | D1 |
| 1 | LM7805 | TO220 | U3 |
| 1 | LOGO | PTL-ino:Logo_silk_CC-BY-SA_5x2mm | CCBYSA |
| 1 | MCP1702-3302 | TO92 | U4 |
| 1 | PIC16F1455 | PTL-ino:DIP-14__300_ELL | U1 |
| 1 | SW_PUSH | PTL-ino:SW_PUSH_SMALL | SW1 |
More from PostTenebrasLab/PTL-ino
1Similar boards
- 2 layers40 × 60 mm
Delivery Box Reporter
buteomont/Delivery-Box-Reporter
Notify via MQTT when a package arrives in the delivery box
12 parts - 2 layers99.6 × 114.8 mm
MiniFPGA panel
MicrochipTech/veryVerilog
Learn Verilog basics the easy way with the world's smallest FPGA.
400 parts15 - 2 layers146 × 64 mm
- 2 layers24 × 27.9 mm
- 2 layers86.4 × 35.1 mm
- 2 layers15.7 × 67.1 mm
- 2 layers99.6 × 99.8 mm
- 2 layers196.4 × 195.1 mm
Motherboard
ParadigmHyperloop/electrical
All schematics and layouts in KiCad, plus some simulations
291 parts11
Questions
How big is the PTLino PCB?
It measures 61 × 51.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PTLino use?
37 parts, built around the ATMEGA328-PU, PIC16F1455-I/P, LM7805 and MCP1702-3302E/CB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PTLino KiCad files?
From the PostTenebrasLab/PTL-ino repository on GitHub, at the commit this page was made from: the board is hardware/PTLino.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PTLino design in my own project?
Its repository states no licence, so its author keeps all rights: ask PostTenebrasLab before reusing the design.