Skip to the content
123

MCP1702-3302E/CB

Microchip TechnologyExtended

-40℃~+125℃@(Tj) 1 13.2V 250mA 3.3V 44dB@(100Hz) 5uA 725mV@(250mA) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23A-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
microchip/MCP1702-3302E/CB
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23A-3
Pins
3
In stock
15,129 at JLCPCB (C33844)
Used on
2 open-source boards

Overview

The MCP1702-3302E/CB is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Microchip Technology in a SOT-23A-3 package with 3 pins. -40℃~+125℃@(Tj) 1 13.2V 250mA 3.3V 44dB@(100Hz) 5uA 725mV@(250mA) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23A-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1GND_2OUT_3IN, from PCBKit's generic symbols) and its footprint (EasyEDA_Pro:sot-23-3_l2.9-w1.3-p1.90-ls2.4-br, from EasyEDA Pro), ready for a KiCad board. 15,129 are in stock at JLCPCB (part C33844). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

3IN2OUT1GND
Pinmap_Generic:Regulator_Linear_1GND_2OUT_3INFrom PCBKit's generic symbols

Footprint

123
EasyEDA_Pro:sot-23-3_l2.9-w1.3-p1.90-ls2.4-brFrom EasyEDA Pro

From the datasheet

11
Supply, least
2.7 V · VIN, recommended operating min; also requires VOUT(MAX) + VDROPOUT(MAX) · p. 3
Supply, most
13.2 V · VIN, recommended operating max · p. 3
Supply, absolute maximum
14.5 V · VDD, absolute maximum · p. 3
Junction, hottest
150 °C · junction temperature, absolute max · p. 3
Takes working
2 µA · input quiescent current, IL = 0 mA, typical · p. 3
Gives
250 mA · continuous output rating, VR ≥ 2.5 V, max · p. 3
Current limit
500 mA · current limit, TA = +25°C, typical · p. 16
Output
3.3 V · fixed output, MCP1702-3302, typical · p. 1
Dropout
525 mV · IL = 250 mA, 3.3 V output, typical · p. 4
Junction to air (3L-SOT-23A)
336 K/W · junction to ambient, JESD51-7 FR-4 4-layer board, typical · p. 5
Junction to case (3L-SOT-23A)
110 K/W · junction to case, typical · p. 5

Open-source boards using it

2
  • 2 layers40 × 60 mmDelivery Box Reporter, the printed circuit board in 3D

    Delivery Box Reporter

    buteomont/Delivery-Box-Reporter

    Notify via MQTT when a package arrives in the delivery box

    12 parts
  • 2 layers61 × 51.3 mmPTLino, the printed circuit board in 3D

    PTLino

    PostTenebrasLab/PTL-ino

    The PTL-ino (“petilino”) is a *uino-compatbile board that is fully made of easily solderable through-hole components.

    37 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP1702-3302E/CB?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1GND_2OUT_3IN and the footprint EasyEDA_Pro:sot-23-3_l2.9-w1.3-p1.90-ls2.4-br, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP1702-3302E/CB?

SOT-23A-3, with 3 pins. Its footprint is drawn on this page.

Where is the MCP1702-3302E/CB datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP1702-3302E/CB?

JLCPCB lists it as part C33844, with 15,129 in stock; the sellers' links on this page open their listings.

What can replace the MCP1702-3302E/CB?

Parts like it in the library: the AMS1117-3.3 by Advanced Monolithic Systems, the AMS1117-3.3 by UMW, the XC6206P332MR-MS by MSKSEMI and the ME6211C33M5G-N by MICRONE. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP1702-3302E/CB?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.