2 layers
2 layers200 × 214 mm
Panelized
PawprintPrototyping/OpenSauce25All things Open Sauce 2025
- Size
- 200 × 214 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 145
- Nets
- 70
- Pads
- 346
- Tracks, vias
- 422, 28
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Feb 2025
- Updated
- 11 Jul 2025
Overview
Panelized is an open-source printed circuit board by PawprintPrototyping, from the PawprintPrototyping/OpenSauce25 repository on GitHub. It is a 2-layer board of 200 × 214 mm with 145 parts on 70 nets, routed with 422 tracks and 28 vias.
It is built around the MAX485ED, EAIRMCA1 and 2N7002BK, with the RJ45 among its other parts. Its parts include 25 diodes, 8 resistors, 6 connectors, 4 capacitors and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4
MAX485ED
SOP-8-40℃~+85℃ 1 1 1mA 32 4.75V~5.25V 5Mbps Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTCRS-485 / RS-422 ICs
EAIRMCA1
插件Infrared Remote Receiver (IRM)Everlight Electronics
2N7002BK
SOT-23-55℃~+150℃ 1 N-channel 1.6Ω@10V 2.1V 350mA 370mW 4pF 50pF 600pC@4.5V 60V N-Channel SOT-23 MOSFETs ROHSNexperiaMOSFETs
RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
README
README.mdOpenSauce25
All things Open Sauce 2025
Parts
145| Qty | Value | Footprint | References |
|---|---|---|---|
| 76 | NPTH | NPTH | KiKit_MB_10_1, KiKit_MB_10_2, KiKit_MB_10_3, KiKit_MB_10_4, KiKit_MB_10_5, KiKit_MB_11_1, KiKit_MB_11_2, KiKit_MB_11_3, KiKit_MB_11_4, KiKit_MB_12_1, KiKit_MB_12_2, KiKit_MB_12_3, KiKit_MB_12_4, KiKit_MB_13_1, KiKit_MB_13_2, KiKit_MB_13_3 +60 |
| 10 | Enable LED | LED_SMD:LED_1206_3216Metric | D5, D6, D7, D8, D9, D10, D11, D12, D13, D14 |
| 10 | Hit LED | LED_SMD:LED_1206_3216Metric | D16, D17, D18, D19, D20, D21, D22, D23, D24, D25 |
| 8 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID1, FID2, FID2, FID3, FID3, FID4, FID4 |
| 4 | 2k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4 |
| 4 | R | Resistor_SMD:R_0603_1608Metric | R5, R6, R7, R8 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C3 |
| 2 | 2N7002BK | Package_TO_SOT_SMD:SOT-23-3 | Q1, Q2 |
| 2 | Conn_01x15 | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J1, J2 |
| 2 | RJ45 | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J4, J5 |
| 2 | SW_DIP_x04 | Button_Switch_THT:SW_DIP_SPSTx04_Piano_10.8x11.72mm_W7.62mm_P2.54mm | SW1, SW2 |
| 1 | 100uF 50V | Capacitor_SMD:CP_Elec_10x10.5 | C4 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | 1mH | Mini360_step-down:Inductor_SDR1307 | L1 |
| 1 | Arduino_Nano_Every | Module:Arduino_Nano | A1 |
| 1 | EAIRMCA1 | OptoDevice:Vishay_MOLD-3Pin | U2 |
| 1 | EtherKiller1 | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | EtherKiller2 | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | Filter Bypass | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP3 |
| 1 | LED_Green | LED_SMD:LED_1206_3216Metric | D1 |
| 1 | LED_Red | LED_SMD:LED_1206_3216Metric | D3 |
| 1 | LED_White | LED_SMD:LED_1206_3216Metric | D2 |
| 1 | LED_Yellow | LED_SMD:LED_1206_3216Metric | D4 |
| 1 | LOGO | LOGO | G*** |
| 1 | MAX485E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Mini360 | Mini360_step-down:Mini360_step-down | U3 |
| 1 | Motor | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J9 |
| 1 | Motor | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J8 |
| 1 | Pololu_Breakout_A4988 | Module:Pololu_Breakout-16_15.2x20.3mm | A2 |
| 1 | SM712_SOT23 | Package_TO_SOT_SMD:SOT-23 | D15 |
The 141 most common of 145 parts.
More from PawprintPrototyping/OpenSauce25
1Similar boards
- 2 layers40 × 50 mm
Wired sculpt
chadaustin/wired-sculpt-pcb
KiCad design files for the Wired Sculpt conversion mod
39 parts35 - 4 layers55 × 25 mm
ADF4158 PCB
daniestevez/ADF4158_PCB
ADF4158 + HMC391 PCB for 10 GHz FMCW radar LO
83 parts30CERN-OHL-P-2.0 - 2 layers106.2 × 40 mm
ProjectTamiya TX
lunakiller/project_tamiya
Custom open-source RC car system based on STM32 MCUs
45 parts8GPL-3.0 - 4 layers202.5 × 307.5 mm
Element foxtrot
visionspacetec/VST104-Foxtrot
VST104 Flat-Sat board - referred as element_foxtrot
147 parts5 - 4 layers190 × 145 mm
Motor izleme karti
melikeatilgan/asenkron-motor-bakim
15 kW asenkron motor için arıza ağacı analizi, aylık bakım formu ve KiCad'de tasarlanmış üç izleme kartı
191 parts1 - 4 layers300 × 200 mm
Prototype
mohan4220/ecu25kva
Replacement engine control unit for a 25 kVA Kirloskar diesel genset — engine 3GK550ETA 4SR1, application code GK3.8703, 26.5 kW at 1500 rpm, 12 V system. Panel controller is a Deep Sea Electronics DSE4522 MKII AMF.
434 parts - 2 layers70.5 × 222.1 mm
Pagtingin Final Panelized
Niqtan/Pagtingin-to-Highway
Version of Pagtingin Repo for Hack Club's Highway Program
460 partsMIT - 4 layers90 × 60 mm
Board a
ruckusmattster/xtm-led-driver
A HDR LED driver with ESPHome integration focused on driving a 36V 1.4A LED
206 partsMIT
Questions
How big is the Panelized PCB?
It measures 200 × 214 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Panelized use?
145 parts, built around the MAX485ED, EAIRMCA1, 2N7002BK and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panelized KiCad files?
From the PawprintPrototyping/OpenSauce25 repository on GitHub, at the commit this page was made from: the board is schematics/panelized.kicad_pcb and its schematic schematics/PawprintTarget.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panelized design in my own project?
Its repository states no licence, so its author keeps all rights: ask PawprintPrototyping before reusing the design.