6 layers54 × 28 mm
4 layers15.2 × 27.2 mm
Riotee Module
NessieCircuits/Riotee_Module1Design Resources for the Riotee Module
- Size
- 15.2 × 27.2 mm
- Copper layers
- 4
- Thickness
- 1 mm
- Parts
- 93
- Nets
- 133
- Pads
- 544
- Tracks, vias
- 818, 192
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 1 Mar 2023
- Updated
- 14 Nov 2024
Overview
Riotee Module is an open-source printed circuit board by NessieCircuits, from the NessieCircuits/Riotee_Module repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 4-layer board of 15.2 × 27.2 mm with 93 parts on 133 nets, routed with 818 tracks and 192 vias.
It is built around the MSP430FR5994IZVW, NRF52833-CJAA-R and MAX20361AEWC+, with the TLV369IDCK, TPS62840YBGR and AM1805AQ among its other parts. Its parts include 43 capacitors, 22 resistors, 7 ICs, 5 connectors and 5 inductors. It belongs with the nRF52 and nRF5x and MSP430 boards of this library.
Main components
12
MSP430FR5994IZVW
NFBGA-87-40℃~+85℃ 1.8V~3.6V 12bit 16 Bit 16MHz 256KB 68 8KB Built-in+External FRAM MSP430 CPUXV2 NFBGA-87 Microcontrollers (MCU/MPU/SOC) ROHSTexas InstrumentsMicrocontrollers (MCU/MPU/SOC)
NRF52833-CJAA-R
WLCSP-75(3.2x3.2)-40℃~+105℃ 1.7V~5.5V 2.4GHz 2Mbps 8dBm Bluetooth、802.15.4 SPI、USB、UART、ADC、I2S、PWM Supports RSSI function、CRC check function、DMA function WLCSP-75(3.2x3.2) RF Transceiver ICs ROHSNordic SemiconRF Transceiver ICs
MAX20361AEWC+
WLP-12(1.63x1.23)225mV~2.5V 360nA 86% boost converter WLP-12(1.63x1.23) Charge Pumps ROHSMaxim Integrated (Analog Devices)Power Management Specialized - PMIC
TLV369IDCK
SC-70-5-40℃~+85℃ 1 1.8V~5.5V 10pA 10pA 110dB 12kHz 25mA 300nV/√Hz@1kHz 400uV 500nV/℃ 5V/ms 800nA Rail-to-Rail Input, Rail-to-Rail Output SC-70-5 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
TPS62840YBGR
DSBGA-6(1x1.5)-40℃~+125℃@(TJ) 1 1.8MHz 1.8V~3.3V 1.8V~6.5V 60nA 750mA Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Output discharge、Cycle-by-cycle current limiting Step-down type Yes DSBGA-6(1x1.5) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersAM1805AQ
QFN-16_3mmx3mmQFN-16_3mmx3mm New Arrivals ROHSAMBIQUncategorised
TLV7032DSG
WSON-8(2x2)-40℃~+125℃ 1.6V~6.5V 100uV 10mV 1pA 2 2pA 315nA 3us 4.5ns 73dB 7V Built-in hysteresis CMOS Push-pull Rail-to-rail input WSON-8(2x2) Comparators ROHSTexas InstrumentsComparators
GRM033R61A104ME15D
0201100nF 10V X5R ±20% 0201 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMurataMultilayer Ceramic Capacitors MLCC - SMD/SMT
CM8V-T1A-32.768KHZ-9PF-20PPM-TA-QC
SMD2012-2P-40℃~+85℃ 32.768kHz 70kΩ 9pF Crystal Oscillator ±20ppm SMD2012-2P Crystals ROHSMicro CrystalCrystals
PMCM4401VPEZ
WLCSP-4(0.8x0.8)1 P-Channel 10nC@4.5V 12.5W 12V 165pF 195pF 3.9A 415pF 65mΩ@4.5V 900mV P-Channel WLCSP-4(0.8x0.8) MOSFETs ROHSNexperiaMOSFETs
MLZ1608N2R2LT000
0603110mA 180mΩ 2.2uH 2MHz 500mA Multilayer inductor ±20% 0603 Inductors (SMD) ROHSTDKInductors (SMD)LQP03TN2N7B02D
020110GHz 14@500MHz 2.7nH 200mΩ 500mA Thick Film Inductor 0201 Inductors (SMD) ROHSMurataInductors (SMD)
README
README.mdRiotee Module Hardware Design Files
The Riotee Module is a stamp-sized unit (27.2mm by 15.2mm) that can be soldered onto a user's \ac{pcb} with additional circuitry like sensors or harvesters to create deployment-ready battery-free devices quickly. It integrates harvesting circuitry, two MCUs, an RTC, a PCB antenna, and an LED on a compact 4-layer PCB enclosed in a metal RF shield. The module features breadboard-compatible castellated holes exposing essential signals, including 11 GPIO, two of which can also function as analog inputs. Four additional signals on the back of the module are available when reflow-soldered onto a carrier board.
For more details and pinouts, refer to the documentation.
Latest design files:
Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Riotee:C_0201_0603Metric | C9, C13, C15, C16, C18, C26, C29, C31, C33, C35, C43 |
| 8 | 1u | Riotee:C_0201_0603Metric | C2, C4, C17, C20, C30, C32, C34, C36 |
| 6 | 12p | Riotee:C_0201_0603Metric | C21, C22, C23, C24, C38, C39 |
| 5 | 22u | Riotee:C_0402_1005Metric | C5, C6, C7, C40, C41 |
| 5 | 820p | Riotee:C_0201_0603Metric | C10, C11, C12, C28, C37 |
| 4 | 10M | Riotee:R_0201_0603Metric | R4, R5, R7, R15 |
| 4 | 5.62M | Riotee:R_0201_0603Metric | R6, R8, R16, R20 |
| 3 | 220k | Riotee:R_0201_0603Metric | R11, R19, R22 |
| 3 | 47k | Riotee:R_0201_0603Metric | R2, R13, R21 |
| 3 | Crystal | Riotee:ECX-12R | Y2, Y3, Y4 |
| 2 | 10u | Riotee:C_0402_1005Metric | C1, C8 |
| 2 | 220R | Riotee:R_0201_0603Metric | R1, R14 |
| 2 | 3.3M | Riotee:R_0201_0603Metric | R9, R17 |
| 2 | PMCM4401VPE | Riotee:NXP_WLCSP4 | Q1, Q2 |
| 1 | 0.7p | Riotee:RFSMD_0201_0603Metric | C25 |
| 1 | 0.8p | Riotee:RFSMD_0201_0603Metric | C19 |
| 1 | 1.5M | Riotee:R_0201_0603Metric | R18 |
| 1 | 1.74k | Riotee:R_0201_0603Metric | R3 |
| 1 | 10n | Riotee:C_0201_0603Metric | C3 |
| 1 | 2.2u | Riotee:L_0603_1608Metric | L2 |
| 1 | 2.7n | Riotee:RFSMD_0201_0603Metric | L5 |
| 1 | 3.9M | Riotee:R_0201_0603Metric | R12 |
| 1 | 3.9n | Riotee:RFSMD_0201_0603Metric | L3 |
| 1 | 4.7u | Riotee:C_0402_1005Metric | C14 |
| 1 | 4.7u | Riotee:L_0805_2012Metric | L1 |
| 1 | 47p | Riotee:C_0201_0603Metric | C42 |
| 1 | 5.6n | Riotee:RFSMD_0201_0603Metric | L4 |
| 1 | 680k | Riotee:R_0201_0603Metric | R10 |
| 1 | AM1805 | Riotee:AM_QFN16 | U7 |
| 1 | Antenna_Chip | Riotee:Texas_SWRA117D_2.4GHz_Left | AE1 |
| 1 | Conn_01x06 | Riotee:CastellatedHoles_1x06_P2.54mm | J5 |
| 1 | Conn_01x07 | Riotee:BackPads | J4 |
| 1 | Conn_01x08 | Riotee:CastellatedHoles_1x08_P2.54mm_Right | J3 |
| 1 | Conn_01x08 | Riotee:CastellatedHoles_1x08_P2.54mm_Left | J2 |
| 1 | DNP | Riotee:RFSMD_0201_0603Metric | C27 |
| 1 | D_Schottky | Riotee:D_0402_1005Metric | D1 |
| 1 | ECS-320-8-47B-7KM-TR | Riotee:ECS_ECX-1247B | Y1 |
| 1 | LED | Riotee:LED_0402_1005Metric | D2 |
| 1 | MAX20361AEWC+ | Riotee:MX_W121C1+2 | U1 |
| 1 | MSP430FR5994IZVW | Riotee:TI_ZVW | U6 |
| 1 | NRF52833-CJAA | Riotee:NRF52833-CJAA | U5 |
| 1 | PMCM4401VNE | Riotee:NXP_WLCSP4 | Q3 |
| 1 | RFShield_OnePiece | Riotee:EMI_SHIELD_CSTM | J1 |
| 1 | TLV369DCK | Riotee:TI_SC70-5_DCK5 | U3 |
| 1 | TLV7032 | Riotee:TI_WSON8_DSG | U4 |
| 1 | TPS62840YBG | Riotee:TI_YBG6 | U2 |
The 92 most common of 93 parts.
Similar boards
- 4 layers60.6 × 27.6 mm
Display pcb
HW-Lab-Hardware-Design-Agency/WebScreen-PCB
WebScreen PCB designs, BOM and other manufacturing files.
93 parts13CERN-OHL-P-2.0 - 2 layers46.4 × 18.8 mm
Densor nfc v2
TUDSSL/densor
Densor is an intraoral sensor platform, attached to regular dental retainers or aligners, that can take measurements inside the mouth.
25 parts3MIT - 6 layers75.3 × 94.2 mm
- 4 layers100 × 180 mm
- 2 layers40.8 × 24.2 mm
- 4 layers35 × 30.4 mm
Siplab wristband
bastocon/sparse-pose-benchmark
Bachelor Thesis Paper: Sparse Pose Estimation data collection, evaluation backend, frontend, as well as all resources for the creation of the Hidden Dataset using commodity sensors.
67 partsMIT - 4 layers90 × 21 mm
Soilsense
fredriknk/ssense
Open hardware for a Zigbee nrf52833 soil moisture probe, It is designed for using M3 stainless steel rods as probes screwed into the headers H1,H2,H3.
74 partsMIT
Questions
How big is the Riotee Module PCB?
It measures 15.2 × 27.2 mm and has 4 copper layers, 1 mm thick.
What parts does the Riotee Module use?
93 parts, built around the MSP430FR5994IZVW, NRF52833-CJAA-R, MAX20361AEWC+ and TLV369IDCK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Riotee Module KiCad files?
From the NessieCircuits/Riotee_Module repository on GitHub, at the commit this page was made from: the board is kicad/riotee-module.kicad_pcb and its schematic kicad/board_connectors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Riotee Module design in my own project?
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).