
NRF development board HAN V1.0
EmielV2002/nRF_dev_board
A dev board utilizing the nRF53 and nPM1100 chip.

PCB for the Athena project
Athena pcb is an open-source printed circuit board by JasonStoyanov, from the JasonStoyanov/athena_pcb repository on GitHub. It is a 2-layer board of 40.8 × 24.2 mm with 37 parts on 75 nets, routed with 354 tracks and 55 vias.
It is built around the NRF5340-QKAA-R7, BME280 and LQM18DN100M70L, with the LQP03HQ2N2B02D, CM8V-T1A-32.768KHZ-9PF-20PPM-TA-QC and XRCGB32M000F1S1JR0 among its other parts. Its parts include 19 capacitors, 3 inductors, 2 ICs, 2 crystals and 1 resistor. It belongs with the nRF52 and nRF5x boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nF | GRM033R71C301JA01D:CAPC0603X33N | C6, C8, C9, C10, C11, C13, C14, C15, C16, C18, C19 |
| 5 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C4, C5, C7 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4 |
| 2 | 10uH | LQM18DN100M70L:INDC1608X95N | L1, L2 |
| 1 | 0.7pF | GRM033R71C301JA01D:CAPC0603X33N | C12 |
| 1 | 2.2nF | GRM033R71C301JA01D:CAPC0603X33N | C3 |
| 1 | 2.2nH | LQP03HQ2N2B02D:IND_LQP03HQ2N2B02D | L3 |
| 1 | 200R | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 32.768kHz | CM8V-T1A-32.768KHZ-9PF-20PPM-TA-QC:XTAL_CM8V-T1A-32.768KHZ-9PF-20PPM-TA-QC | Y2 |
| 1 | 32MHz | XRCGB32M000F1H19R0:OSC_XRCGB32M000F1H19R0 | Y1 |
| 1 | Antenna | RF_Antenna:Texas_SWRA117D_2.4GHz_Right | AE1 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U2 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_1060_1x2032 | BT1 |
| 1 | Conn_01x04 | Connector_PinSocket_1.27mm:PinSocket_1x06_P1.27mm_Vertical | J2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | N.C | GRM033R71C301JA01D:CAPC0603X33N | C17 |
| 1 | NRF5340-QKAA-R7 | NRF5340-QKAA-R7:XCVR_NRF5340-QKAA-R7 | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
The 36 most common of 37 parts.

EmielV2002/nRF_dev_board
A dev board utilizing the nRF53 and nPM1100 chip.


Iwetter/EEG32
32-channel ADS1299/nRF52832 acquisition board design in KiCad, with schematics, PCB layout, BOM, and pre-fabrication documentation. Bench tests pending.

ben5049/Smart-Watch
This project aims to take a cheap, common smart watch and upgrade it by replacing the screen and all internal electronics with custom hardware.



NessieCircuits/Riotee_Module
Design Resources for the Riotee Module

bastocon/sparse-pose-benchmark
Bachelor Thesis Paper: Sparse Pose Estimation data collection, evaluation backend, frontend, as well as all resources for the creation of the Hidden Dataset using commodity sensors.
It measures 40.8 × 24.2 mm and has 2 copper layers, 1.6 mm thick.
37 parts, built around the NRF5340-QKAA-R7, BME280, LQM18DN100M70L and LQP03HQ2N2B02D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JasonStoyanov/athena_pcb repository on GitHub, at the commit this page was made from: the board is athena_pcb.kicad_pcb and its schematic athena_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JasonStoyanov before reusing the design.