4 layers61.1 × 28 mm
6 layers75.3 × 94.2 mm
Zynq sdr dongle
SunnyYoshimitsu/SideKickWIP, FPGA Based Phone
- Size
- 75.3 × 94.2 mm
- Copper layers
- 6
- Thickness
- 1.22 mm
- Parts
- 285
- Nets
- 412
- Pads
- 1,847
- Tracks, vias
- 4,219, 928
- Pours
- 64
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Sep 2026
- Updated
- 18 Sep 2026
Overview
Zynq sdr dongle is an open-source printed circuit board by SunnyYoshimitsu, from the SunnyYoshimitsu/SideKick repository on GitHub, published under the GPL-3.0 licence. It is a 6-layer board of 75.3 × 94.2 mm with 285 parts on 412 nets, routed with 4,219 tracks and 928 vias.
It is built around the XC7Z020CLG400, AD9361BBC and TXS0206AYFP, with the USB3346-CP, TPS62867RQY and NFM15PC146R0G3D among its other parts. Its parts include 148 capacitors, 71 resistors, 14 connectors, 12 ICs and 8 inductors. It belongs with the fPGA and programmable logic and radio and wireless boards and the FPGA and CPLD boards of this library.
Main components
9XC7Z020CLG400
-- Programmable Logic Device (CPLDs/FPGAs) ROHSAMD/XILINXProgrammable Logic Device (CPLDs/FPGAs)
AD9361BBC
BGA144RF Agile Transceiver, RF 2 × 2 transceiver with integrated 12-bit DACs and ADCsAnalog DevicesUncategorised
TXS0206AYFP
BGA20MMC, SD Card, Memory Stick™ Voltage-Translation Transceiver with ESD Protection and EMI Filtering, -40°C to 85°CTexas InstrumentsUncategorised
USB3346-CP
QFN-24-EP(4x4)-40℃~+85℃ Transceiver QFN-24-EP(4x4) USB Converters ROHSMicrochip TechnologyUSB ConvertersTPS62867RQY
UncategorisedTexas InstrumentsNFM15PC146R0G3D
SMD-4P,0.5x1mm-55℃~+85℃ 14uF 2A 30mΩ 4V ±20% SMD-4P,0.5x1mm Feed Through Capacitors ROHSMurataFeed Through Capacitors
0850BM14E0016
06030603 New Arrivals ROHSJohanson DielectricsUncategorised
DFE18SANR47MG0L
06032.6A 3.3A 470nH 54mΩ ±20% 0603 Inductors (SMD) ROHSMurataInductors (SMD)
PMCM4401VNEAZ
WLCSP-4(0.8x0.8)-55℃~+150℃ 1 N-channel 12V 335pF 4.7A 400mW、12.5W 42mΩ@4.5V 900mV 9nC@4.5V WLCSP-4(0.8x0.8) MOSFETs ROHSNexperiaMOSFETs
Parts
285| Qty | Value | Footprint | References |
|---|---|---|---|
| 85 | 0.1uF | Capacitor_SMD:C_0201_0603Metric | C11, C100, C107, C108, C109, C110, C111, C115, C116, C117, C130, C131, C132, C133, C134, C135 +69 |
| 29 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C23, C27, C30, C32, C35, C37, C39, C40, C42, C43, C101, C102, C118, C119, C123, C128 +13 |
| 15 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2, C10, C13, C22, C28, C29, C36, C41, C62, C63, C78, C79, C120, C124, C125 |
| 12 | 10K | Resistor_SMD:R_0201_0603Metric | R8, R19, R22, R25, R46, R49, R50, R52, R62, R65, R66, R69 |
| 8 | 4.7K | Resistor_SMD:R_0201_0603Metric | R2, R47, R48, R55, R56, R59, R70, R71 |
| 8 | Fiducial | Fiducial:Fiducial_0.75mm_Mask2.25mm | FID1, FID2, FID3, FID4, FID5, FID6, FID7, FID8 |
| 7 | 1K | Resistor_SMD:R_0201_0603Metric | R31, R32, R33, R34, R35, R36, R40 |
| 7 | FerriteBead_Small | Capacitor_SMD:C_0201_0603Metric | FB2, FB3, FB4, FB5, FB6, FB7, FB8 |
| 7 | N/A | Resistor_SMD:R_0201_0603Metric | R42, R51, R54, R60, R61, R63, R68 |
| 6 | 18pF | Capacitor_SMD:C_0201_0603Metric | C1, C6, C9, C12, C80, C81 |
| 6 | Conn_Coaxial | Connector_Coaxial_Local:U.FL_Molex_MCRF_73412-0110_Vertical | J5, J6, J7, J8, J9, J12 |
| 6 | NFM15PC146R0G3D | Capacitor_SMD_Local:C_0402_1005Metric | C82, C104, C105, C112, C113, C114 |
| 4 | 0850BM14E0016 | RF_Converter:Balun_Johanson_1.6x0.8mm | FL1, FL2, FL3, FL4 |
| 4 | 0R | Resistor_SMD:R_0201_0603Metric | R28, R53, R64, R67 |
| 4 | 10nF | Capacitor_SMD:C_0402_1005Metric | C121, C122, C126, C127 |
| 4 | DFE18SANR47MG0 | Inductor_SMD:L_Murata_LQH2MCNxxxx02_2.0x1.6mm | L1, L6, L7, L8 |
| 4 | L | Inductor_SMD:L_0402_1005Metric | L2, L3, L4, L5 |
| 3 | 14.3K | Resistor_SMD:R_0201_0603Metric | R11, R12, R18 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C103, C106, C129 |
| 3 | 5K | Resistor_SMD:R_0201_0603Metric | R7, R30, R38 |
| 3 | 80Ω | Resistor_SMD:R_0201_0603Metric | R1, R4, R5 |
| 3 | LED | LED_SMD:LED_0201_0603Metric | D1, D2, D3 |
| 3 | SiT1602B | Oscillator:Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mm | X1, X2, X3 |
| 3 | TPS62088 | Capacitor_SMD_Local:PowerWCSP-6 | U4, U9, U10 |
| 2 | 23.7K | Resistor_SMD:R_0201_0603Metric | R6, R37 |
| 2 | 240Ω | Resistor_SMD:R_0201_0603Metric | R3, R43 |
| 2 | 300K | Resistor_SMD:R_0201_0603Metric | R14, R16 |
| 2 | 30R | Resistor_SMD:R_0201_0603Metric | R57, R58 |
| 2 | 360K | Resistor_SMD:R_0201_0603Metric | R13, R15 |
| 2 | 500Ω | Resistor_SMD:R_0201_0603Metric | R44, R45 |
| 2 | FerriteBead_Small | Capacitor_SMD:C_0402_1005Metric | FB1, FB9 |
| 2 | MAX38904C | Package_CSP_Local:wlp-15_2p168_1p338_0p5_0p4 | U6, U7 |
| 2 | TVS | Resistor_SMD:R_0201_0603Metric | D4, D5 |
| 1 | 0R | Resistor_SMD:R_0402_1005Metric | R41 |
| 1 | 10.2K | Resistor_SMD:R_0201_0603Metric | R29 |
| 1 | 100K | Resistor_SMD:R_0201_0603Metric | R21 |
| 1 | 18K | Resistor_SMD:R_0201_0603Metric | R10 |
| 1 | 200K | Resistor_SMD:R_0201_0603Metric | R20 |
| 1 | 22K | Resistor_SMD:R_0201_0603Metric | R26 |
| 1 | 33K | Resistor_SMD:R_0201_0603Metric | R27 |
| 1 | 41.2K | Resistor_SMD:R_0201_0603Metric | R24 |
| 1 | 5024268012 | Connector_Molex:Molex_SlimStack_502430-8010_2x40_P0.40mm_Vertical | J4 |
| 1 | 51.1K | Resistor_SMD:R_0201_0603Metric | R39 |
| 1 | 51.7K | Resistor_SMD:R_0201_0603Metric | R23 |
| 1 | 8.06K | Resistor_SMD:R_0201_0603Metric | R17 |
| 1 | 82K | Resistor_SMD:R_0201_0603Metric | R9 |
| 1 | AD9361 | RF_Transceiver:bga-100_10_10_1p32_0p8 | U3 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J14 |
| 1 | Conn_01x04_Male | Connector_Local:BM03B-ACHSS-GAN-TF | J13 |
| 1 | Conn_01x13_Male | Connector_PinHeader_2.54mm:PinHeader_1x13_P2.54mm_Vertical | J10 |
| 1 | Conn_01x16_Male | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J11 |
| 1 | DDR3 | Package_BGA:BGA-96_9.0x13.0mm_Layout2x3x16_P0.8mm_NoPaste | U1 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Molex_104031-0811 | J3 |
| 1 | PMCM4401VNE | Package_CSP_Local:WLCSP-4-X1-WLB0909-4_0.89x0.89mm_P0.5mm | Q2 |
| 1 | Q_Dual_NMOS_PMDXB600UNE | Package_DFN_QFN:DFN-6-1EP_1.2x1.2mm_P0.4mm_EP0.3x0.94mm_PullBack | Q1 |
| 1 | SW_DIP_x01 | Switcher:EVQ9P701P | SW2 |
| 1 | TPS2121 | Capacitor_SMD_Local:VQFN-12_2p0_2p5_0p5 | U11 |
| 1 | TPS62867 | Capacitor_SMD_Local:VQFN-HR | U8 |
| 1 | TXS0206A | Package_CSP_Local:WLCSP-20_1.609x1.994mm_Layout4x5_P0.4mm | U13 |
| 1 | USB3346 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U5 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10104110_Horizontal | J2 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_Amphenol_12401548E4-2A_CircularHoles | J1 |
| 1 | xc7z020clg400 | Package_CSP_Local:Xilinx_CLG400_020_Delay | U2 |
More from SunnyYoshimitsu/SideKick
1Similar boards
- 6 layers75 × 31 mm
Som
SunnyYoshimitsu/CelestiCall
An attempt at making a somewhat modern smartphone with many functions.
186 parts1 - 4 layers15.2 × 27.2 mm
Riotee Module
NessieCircuits/Riotee_Module
Design Resources for the Riotee Module
93 parts1CERN-OHL-W-2.0 - 2 layers60 × 45 mm
- 6 layers71 × 126 mm
QuasarSDR
petrinm/QuasarSDR-Hardware
Hardware design files are disrtributed under CERN Open Hardware Licence Version 2 - Weakly Reciprocal licence.
454 parts7CERN-OHL-W-2.0 - 2 layers48.5 × 54.5 mm
- 6 layers198.9 × 160 mm
LT EL IS BI PPS-0101-02 REV A
jamead/acmi1-hw-febrd
Kicad files for the ACMI-1 Front End Board
284 parts - 6 layers
- 6 layers184.3 × 234 mm
Lightfury panel
jusdisgi/LightFury
Light Fury Keyboard: Ergo Split with 54 PG1316S keyswitches, 54 LEDs, LCDs, and Roller Encoders.
284 parts2MIT
Questions
How big is the Zynq sdr dongle PCB?
It measures 75.3 × 94.2 mm and has 6 copper layers, 1.22 mm thick.
What parts does the Zynq sdr dongle use?
285 parts, built around the XC7Z020CLG400, AD9361BBC, TXS0206AYFP and USB3346-CP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zynq sdr dongle KiCad files?
From the SunnyYoshimitsu/SideKick repository on GitHub, at the commit this page was made from: the board is hardware/zynq_sdr_dongle.kicad_pcb and its schematic Peripheral-Board-master/Peripheral Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zynq sdr dongle design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).