

Pcbdraft-2
An open source storage cart
- Size
- 115.3 × 101.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 36
- Pads
- 206
- Tracks, vias
- 365, 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Jan 2024
- Updated
- 5 Jun 2024
Overview
Pcbdraft-2 is an open-source printed circuit board by MikeL270, from the MikeL270/Arduino_Storage_Cart repository on GitHub, published under the MIT licence. It is a 2-layer board of 115.3 × 101.6 mm with 27 parts on 36 nets, routed with 365 tracks and 4 vias.
It is built around the RJ45. Its parts include 17 connectors and 8 resistors. It belongs with the radio and wireless boards of this library.
Main components
1README
README.mdArduino Storage Cart
Overview
The arduino storage cart is a modularly built storage solution for small electronic components or really anything that fits in a tacklebox. Designed to be scalable and customizable, the system uses 3d printed innerlocking joints that fit into wooden dowels to create a skeleton to be filled with "tackle boxes." These boxes correspond to LEDs wired using category 5e UTP (unsheilded twisted pair) cable. In order to interface with the cart, an adafruit featherwing nrf52840 express mounted to a custom PCB (printed circuit board) running circuit python firmware interfaces with via ble with a self hosted sql databased server.
Tech Stack
Programming Stack
- MySQL: A lightweight SQL compliant database serves as the backbone of the storage cart system, allowing for simple deployment and maintenance by individuals and groups alike.
- Circuit Python: A high level programming language used to control low level hardware functions allows firmware code to be readable and thus highly maintainable by virutally any skill level.
- Flask Web Server: Extensible python webserver to allow for an easy to access front end across your entire network. (web facing deployment is NOT reccomended).
- NGINX Reverse Proxy: Secure reverse proxy server to handle http and https requests inside your network.
- BLE Nordic Uart: Serial BLE wrapper to manage communication between the storage cart and server.
- Python Multiprocessing: Multiprocessing to allow asynchronous communications to occur independent from web server functions streamlines code. Mutex locks are used to share data between processes.
Hardware Stack
-Adafruit nrf52840: An affordable ble and circuit python capable arduino device. -Custom PCB: A printed circuit board with rj45 connectors to control up to 64 leds with 128 wires using only 16 GPIO pins. -3d Printed Chassis: Easily reproducable plastic components simplify replication and deployment of storage cart systems
Deployment
Currently planning on deploying with docker-compose. More details to come as project develops further.
Notice
This project is in the very early stages of planning, this readme will change to reflect the state of the project as it progresses.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | RJ45 | Connector_RJ:RJ45_OST_PJ012-8P8CX_Vertical | J1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13, J14, J15, J16 |
| 8 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 |
| 1 | Adafruit_Feather_Generic | Module:Adafruit_Feather | A1 |
| 1 | Enable | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J17 |
| 1 | LOGO | LOGO | G*** |
More from MikeL270/Arduino_Storage_Cart
1- 2 layers113.5 × 101.1 mm

Similar boards
- 2 layers33.7 × 97.8 mm

HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 4 layers84 × 82 mm

Toad
travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.
241 parts333 - 2 layers100 × 100 mm

- 2 layers50 × 55.4 mm

- 2 layers67.9 × 47.8 mm

Platine
nv1t/standing-desk-interceptor
I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project
11 parts52CC0-1.0 - 4 layers90 × 75 mm

- 4 layers73.9 × 84.5 mm

Aei
Severson-Group/AMDC-Hardware
Circuit board designs for controlling advanced motor systems
54 parts51 - 2 layers99 × 60 mm

Pwr
mfkiwl/KiwiSDR_PCB
KiCAD PCB files for KiwiSDR project including active antenna and bias tee
64 parts46
Questions
How big is the Pcbdraft-2 PCB?
It measures 115.3 × 101.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pcbdraft-2 use?
27 parts, built around the RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pcbdraft-2 KiCad files?
From the MikeL270/Arduino_Storage_Cart repository on GitHub, at the commit this page was made from: the board is Hardware/PCB/pcbdraft-2/pcbdraft-2.kicad_pcb and its schematic Hardware/PCB/pcbdraft-1/pcbdraft-1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pcbdraft-2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).