

Space Invaders
Collection of personal circuit projects
- Size
- 82.6 × 61 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 35
- Pads
- 118
- Tracks, vias
- 126, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 24 Dec 2017
- Updated
- 7 Apr 2025
Overview
Space Invaders is an open-source printed circuit board by Matt-Santos, from the Matt-Santos/Arcade-Systems repository on GitHub. It is a 2-layer board of 82.6 × 61 mm with 36 parts on 35 nets, routed with 126 tracks and 0 vias.
It is built around the PIC16F1705-I/P, LM386 and 24LC512-I/P, with the MC78M05CTG, FQP30N06L and ZVN3306A among its other parts. Its parts include 14 resistors, 6 capacitors, 6 transistors, 5 ICs and 2 connectors. It belongs with the PIC boards of this library.
Main components
6PIC16F1705-I/P
PDIP-14-40℃~+85℃ 10bit 12 14KB 1KB 2.3V~5.5V 32MHz 8 Bit 8bit Built-in FLASH PIC PDIP-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)LM386
SOP-80.2% 0℃~+70℃ 4V~12V 4mA 50dB 700mWx1@8Ω Analog voltage gain SOP-8 Audio Amplifiers ROHSGcoreAudio Power OpAmps24LC512-I/P
PDIP-8-300mil-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 512Kbit 5ms Hardware write protection function、Noise suppression function I2C PDIP-8-300mil EEPROM ROHSMicrochip TechnologyEEPROMMC78M05CTG
TO-220-30℃~+125℃@(Tj) 1 3.2mA 35V 40uV 500mA 5V 62dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-220-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsFQP30N06L
TO-220-3-55℃~+175℃ 1 N-channel 1.04nF 2.5V 20nC 32A 350pF 35mΩ@10V 60V 65pF 79W N-Channel ±20V TO-220-3 MOSFETs ROHSonsemiMOSFETsZVN3306A
TO-92L-31 N-channel 2.4V 270mA 35pF 5Ω@10V 60V 625mW N-Channel TO-92L-3 MOSFETs ROHSDiodes IncorporatedMOSFETs
README
README.mdArcade Systems
A collection of custom hardware, software, and artwork for my arcade projects. It includes several retro-inspired builds using modern hardware as well as a few modifications to repair/improve functionality on older commercial systems.
As of 2025 my arcade includes the following items:
Custom Designs
- Pinball Magic (2022)
- Pedistal (2021)
- Countertop (2020)
- Cocktail (2019)
Commercial Pinballs
- Secret Service (Data East, 1988)
- Escape from the Lost World (Bally, 1988)
- Farfalla (Zaccaria, 1983)
- SlugFest (Williams, 1991)
- Prospector (Segasa, 1977)
- Captain Fantastic (Bally, 1976)
- Geisha (Playmatic, 1973)
Jukeboxes
- Rockola 488 Sunset Gold (Rockola, 1982)
- Satellite 200 (NSM Music, 1982)
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R4, R5, R6, R7, R8, R9, R10, R12 |
| 4 | FQP30N06L | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q3, Q5, Q6 |
| 2 | 0.1u | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C5 |
| 2 | ZVN3306A | Package_TO_SOT_THT:TO-92_Inline | Q2, Q4 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3386P_Vertical | R14 |
| 1 | 190u | Inductor_THT:L_Axial_L9.5mm_D4.0mm_P15.24mm_Horizontal_Fastron_SMCC | L1 |
| 1 | 1N5820 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D1 |
| 1 | 24LC512-I/P | Package_DIP:DIP-8_W7.62mm_Socket | U2 |
| 1 | 270u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C3 |
| 1 | 3.6k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 30k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 330u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C4 |
| 1 | 4700u | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C6 |
| 1 | 47n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C2 |
| 1 | 6.8k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13 |
| 1 | 68k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11 |
| 1 | ICSP Programing | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | Jumper | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | TP1 |
| 1 | LM386 | Package_DIP:DIP-8_W7.62mm_Socket | U3 |
| 1 | MC33167TVG | Package_TO_SOT_THT:TO-220-5_Vertical | U4 |
| 1 | MC78M05CTG | Package_TO_SOT_THT:TO-220-3_Vertical | U5 |
| 1 | Main Connector | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-11-5.08_1x11_P5.08mm_Horizontal | J2 |
| 1 | PIC16F1705 | Package_DIP:DIP-14_W7.62mm_Socket | U1 |
More from Matt-Santos/Arcade-Systems
2- 2 layers127 × 73.7 mm

- 2 layers36.8 × 30.5 mm

Similar boards
- 2 layers48 × 84 mm

- 2 layers50 × 50 mm

PIC16F1705 MelodyTimer5
ClockWorks001/PIC16F1705_MelodyTimer5
This is a simple kitchen/cooking timer by [PIC16F1705][1]. It can choose which of 3 minutes, 5 minutes and 10 minutes. When it became end of time, it sounds a melody.
26 parts - 2 layers50 × 50 mm

- 2 layers91 × 96.6 mm

- 2 layers68.6 × 53.3 mm

Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers76.2 × 48.9 mm

Epaper clock
mattwach/epaper_clock
Autosetting clock based on an epaper display. Runs about a year on batteries and has basic weather telemetry (temperature, pressure, humidity).
14 parts48Apache-2.0 - 2 layers134 × 91 mm

- 2 layers98 × 83.8 mm

Projeto placa
phfbertoleti/placa_lorawan
Repositório oficial da placa LoRaWAN, um kit de desenvolvimento para protótipos IoT.
39 parts19MIT
Questions
How big is the Space Invaders PCB?
It measures 82.6 × 61 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Space Invaders use?
36 parts, built around the PIC16F1705-I/P, LM386, 24LC512-I/P and MC78M05CTG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Space Invaders KiCad files?
From the Matt-Santos/Arcade-Systems repository on GitHub, at the commit this page was made from: the board is hardware/SpaceInvaders/Space Invaders.kicad_pcb and its schematic hardware/EM_Pinball_Sound/EM_Pinball_Sound.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Space Invaders design in my own project?
Its repository states no licence, so its author keeps all rights: ask Matt-Santos before reusing the design.