2 layers82.6 × 61 mm
2 layers127 × 73.7 mm
DriverBoard
Matt-Santos/Arcade-SystemsCollection of personal circuit projects
- Size
- 127 × 73.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 25
- Pads
- 134
- Tracks, vias
- 174, 20
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 24 Dec 2017
- Updated
- 7 Apr 2025
Overview
DriverBoard is an open-source printed circuit board by Matt-Santos, from the Matt-Santos/Arcade-Systems repository on GitHub. It is a 2-layer board of 127 × 73.7 mm with 36 parts on 25 nets, routed with 174 tracks and 20 vias.
It is built around the PIC16F1705-I/P, LM338T/NOPB and FQP30N06L, with the ZVN2110A among its other parts. Its parts include 14 transistors, 10 resistors, 6 connectors, 4 ICs and 2 diodes. It belongs with the PIC boards of this library.
Main components
4
PIC16F1705-I/P
PDIP-14-40℃~+85℃ 10bit 12 14KB 1KB 2.3V~5.5V 32MHz 8 Bit 8bit Built-in FLASH PIC PDIP-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LM338T/NOPB
TO-2200℃~+125℃@(Tj) 1 1.2V~32V 40V 5A 75dB@(120Hz) Adjustable Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
FQP30N06L
TO-220-3-55℃~+175℃ 1 N-channel 1.04nF 2.5V 20nC 32A 350pF 35mΩ@10V 60V 65pF 79W N-Channel ±20V TO-220-3 MOSFETs ROHSonsemiMOSFETs
ZVN2110A
TO-92MOSFETsDiodes Incorporated
README
README.mdArcade Systems
A collection of custom hardware, software, and artwork for my arcade projects. It includes several retro-inspired builds using modern hardware as well as a few modifications to repair/improve functionality on older commercial systems.
As of 2025 my arcade includes the following items:
Custom Designs
- Pinball Magic (2022)
- Pedistal (2021)
- Countertop (2020)
- Cocktail (2019)
Commercial Pinballs
- Secret Service (Data East, 1988)
- Escape from the Lost World (Bally, 1988)
- Farfalla (Zaccaria, 1983)
- SlugFest (Williams, 1991)
- Prospector (Segasa, 1977)
- Captain Fantastic (Bally, 1976)
- Geisha (Playmatic, 1973)
Jukeboxes
- Rockola 488 Sunset Gold (Rockola, 1982)
- Satellite 200 (NSM Music, 1982)
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | FQP30N06L | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q1, Q2, Q2, Q3, Q3, Q4, Q4 |
| 6 | ZVN2110A | Package_TO_SOT_THT:TO-92S_Wide | Q5, Q5, Q6, Q6, Q7, Q7 |
| 4 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4, R4, R6, R6 |
| 2 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D1 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R2 |
| 2 | 2k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5, R5 |
| 2 | 3.9k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R3 |
| 2 | Control Board | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J15, J15 |
| 2 | Control Board | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J1, J1 |
| 2 | LM338T/NOPB | Package_TO_SOT_THT:TO-220-3_Vertical | U1, U1 |
| 2 | PIC16F1705 | Package_DIP:DIP-14_W7.62mm | U3, U3 |
| 2 | Program | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2, J2 |
More from Matt-Santos/Arcade-Systems
2- 2 layers36.8 × 30.5 mm
Similar boards
- 2 layers50 × 50 mm
PIC16F1705 MelodyTimer5
ClockWorks001/PIC16F1705_MelodyTimer5
This is a simple kitchen/cooking timer by [PIC16F1705][1]. It can choose which of 3 minutes, 5 minutes and 10 minutes. When it became end of time, it sounds a melody.
26 parts - 2 layers50 × 50 mm
- 2 layers208 × 130 mm
- 2 layers46 × 51.3 mm
VCU Signals V1.0
Lafayette-Motorsports/LVBoards
LV Board repository for Motorsports created 09.02.2025
15 parts1 - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers76.2 × 48.9 mm
Epaper clock
mattwach/epaper_clock
Autosetting clock based on an epaper display. Runs about a year on batteries and has basic weather telemetry (temperature, pressure, humidity).
14 parts48Apache-2.0 - 2 layers134 × 91 mm
- 2 layers98 × 83.8 mm
Projeto placa
phfbertoleti/placa_lorawan
Repositório oficial da placa LoRaWAN, um kit de desenvolvimento para protótipos IoT.
39 parts19MIT
Questions
How big is the DriverBoard PCB?
It measures 127 × 73.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DriverBoard use?
36 parts, built around the PIC16F1705-I/P, LM338T/NOPB, FQP30N06L and ZVN2110A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DriverBoard KiCad files?
From the Matt-Santos/Arcade-Systems repository on GitHub, at the commit this page was made from: the board is hardware/SpaceInvaders/Old Version/DriverBoard/DriverBoard.kicad_pcb and its schematic hardware/EM_Pinball_Sound/EM_Pinball_Sound.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DriverBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask Matt-Santos before reusing the design.