
Control motor dc
kr4fty/DCMotorController
Closed Loop Position Control for DC Servo Motors. STEP / DIR compatible Driver

Files and schematics for creating DIY Arduino
Arduino is an open-source printed circuit board by Mateusz20000, from the Mateusz20000/DIY-Arduino repository on GitHub. It is a 2-layer board of 68 × 53 mm with 27 parts on 59 nets, routed with 286 tracks and 10 vias.
It is built around the ATMEGA328P-PU, CP2102N-EK and LM7805. Its parts include 8 connectors, 6 capacitors, 5 diodes, 3 resistors and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Files and schematics for creating DIY Arduino
This project contains files for creating your own Arduino platform. It's completely open source.
Arduino is free, open source platform that helps you understeand basics of electronics.
Electrical scheme:
PCB scheme:
3D Render:
Phisical result:
Hope that this is helpful for you :)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1K | Library:2 Pad | R2, R3 |
| 2 | 22 pF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C2 |
| 1 | 0.1uF | Library:Capacitor Pad | C5 |
| 1 | 100 nF | Library:Capacitor Pad | C3 |
| 1 | 100uF/25V | Library:Capacitor Pad | C6 |
| 1 | 10uF | Library:Capacitor Pad | C4 |
| 1 | 13P_LED | LED_THT:LED_D3.0mm | D5 |
| 1 | 16MHz | Library:Oscillator Pad | Y1 |
| 1 | 330 | Library:2 Pad | R1 |
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | Analog Pins | Library:6 Pin Connector | J1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J5 |
| 1 | CP2102N | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U2 |
| 1 | Conector | Library:3 Pin Connector | J6 |
| 1 | D | Library:2 Pad | D1 |
| 1 | Digital Pins | Library:10 Pin Connector | J3 |
| 1 | Digital Pins | Library:8 Pin Connector | J2 |
| 1 | ICSP | Library:2x3 Pin Connector | J4 |
| 1 | LM7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | ON_LED | LED_THT:LED_D3.0mm | D2 |
| 1 | PWR | Library:8 Pin Connector | J7 |
| 1 | RX_LED | LED_THT:LED_D3.0mm | D3 |
| 1 | SW_SPST | Library:Button Pad | SW1 |
| 1 | TX_LED | LED_THT:LED_D3.0mm | D4 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J8 |

kr4fty/DCMotorController
Closed Loop Position Control for DC Servo Motors. STEP / DIR compatible Driver



lonapse456-glitch/ulang_sys_res
System files of Automated Deep Learning-based Counting System for Giant Freshwater Prawn

NicolasSchkurko/Controlador_Termotanque_Solar_PF_ISJ
Controlador de termotanque solar: ATmega328P maestro + ESP8266 WiFi, con interfaz fisica LCD y web, programacion horaria y guardado en EEPROM. Proyecto Final de 6.º año, Instituto San Jose A-355 (2022).


davixcky/entrenador-atmega328p
Entrenador de microcontroladores con ATMega328P (DIP) - Sistemas Embebidos 1, actividad 10.1.12

phbnascimento/carrinho-pizza
Código fonte, documentação, esquemáticos e PCB do projeto "Gigantes de MDF"
It measures 68 × 53 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the ATMEGA328P-PU, CP2102N-EK and LM7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Mateusz20000/DIY-Arduino repository on GitHub, at the commit this page was made from: the board is Arduino.kicad_pcb and its schematic Arduino.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Mateusz20000 before reusing the design.