

Nano wallscout Atmega328P
bt-soft/nano-wallscout- Size
- 63.8 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 46
- Pads
- 162
- Tracks, vias
- 404, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 25 Oct 2026
- Updated
- 4 Nov 2026
Overview
Nano wallscout Atmega328P is an open-source printed circuit board by bt-soft, from the bt-soft/nano-wallscout repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 63.8 × 75 mm with 53 parts on 46 nets, routed with 404 tracks and 0 vias.
It is built around the ATMEGA328P-PU, MCP6004-E/P and LM7805, with the IRLZ44N and UF4007 among its other parts. Its parts include 18 resistors, 13 capacitors, 4 ICs, 4 diodes and 3 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MCP6004-E/P
PDIP-14-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-14 Operational Amplifier ROHSMicrochip TechnologyOperational AmplifierLM7805
TO-2630℃~+125℃ 1 1A 20V 2V 42uV 5V 62dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsIRLZ44N
TO-22055V 47A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorisedUF4007
DO-41-50℃~+150℃ 1.7V@1A 1A 1kV 30A 5uA@1kV 75ns DO-41 Fast Recovery / High Efficiency Diodes ROHSMDDFast Recovery / High Efficiency Diodes
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm | C1, C3, C4, C8, C9, C11, C13 |
| 5 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6, R7, R10, R11 |
| 5 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R9, R15, R18 |
| 4 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R13, R14, R17 |
| 2 | 100uF/25v | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2, C12 |
| 2 | 1mH | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-3.5-H_1x03_P3.50mm_Horizontal | Lrx1, Ltx1 |
| 2 | 33pF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C6, C7 |
| 2 | 390 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R4 |
| 1 | +9-12V INPUT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J1 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R16 |
| 1 | 1000uF/16V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C5 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C10 |
| 1 | 16MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D4 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal | D1 |
| 1 | 2N2222 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1 |
| 1 | 2k | Potentiometer_THT:Potentiometer_Bourns_3266Y_Vertical | RV1 |
| 1 | 33k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12 |
| 1 | 5k | Potentiometer_THT:Potentiometer_Bourns_3266Y_Vertical | RV2 |
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 1 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q2 |
| 1 | Kalibrálás | Button_Switch_THT:SW_PUSH_6mm_H8mm | SW1 |
| 1 | LM7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U4 |
| 1 | MCP6004 | Package_DIP:DIP-14_W7.62mm_LongPads | U2 |
| 1 | Nullázás | Button_Switch_THT:SW_PUSH_6mm_H8mm | SW2 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm_H8mm | SW3 |
| 1 | SSD1306 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U3 |
| 1 | UF4007 | Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal | D2 |
| 1 | Vétel beállítás | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP2 |
| 1 | ZPY36 / 1W | Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal | D3 |
More from bt-soft/nano-wallscout
2- 2 layers

- 2 layers

Similar boards
- 2 layers

Modified sine inverter gwo pid
mofaa69/modified-sine-inverter-gwo-pid
TÜBİTAK 2209-A Destekli GWO-PID Kontrollü Modifiye Sinüs İnverter Tasarımı ve Uygulaması
61 parts1 - 4 layers128 × 72.5 mm

Flyback Driver V1
Operationorange01/Flyback-Driver
driver for high voltage flyback transformer
120 parts1 - 4 layers189 × 55 mm

Nixie
pimborman/nixie-clock
This repository contains the design files of my own nixie clock. The last version is hosted on my Github Page.
70 parts - 2 layers181.1 × 139.9 mm

Campervan management
akladnig/CamperVan
- CamperVan Design and Arduino Circuit Design - Campervan Design Overview - Dashboard App - Electrical System - Sensors - Circuit Design - Battery and voltage monitoring - Voltage Divider Design - Low Pass Filter - TODO
116 parts - 2 layers58 × 40 mm

- 2 layers39.4 × 107.9 mm

- 4 layers95 × 95 mm

APEX v0
NANDHA0804/Apex-Diagnostic-Tool-V1
Hardware design and manufacturing files for Project Apex V1.0: a multi-functional diagnostic tool. Features a custom 4-layer PCB architecture driven by an ESP32 master and ATmega328P co-processor for high-performance…
146 parts - 2 layers51.7 × 79.4 mm

Control motor dc
kr4fty/DCMotorController
Closed Loop Position Control for DC Servo Motors. STEP / DIR compatible Driver
26 parts5GPL-2.0
Questions
How big is the Nano wallscout Atmega328P PCB?
It measures 63.8 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nano wallscout Atmega328P use?
53 parts, built around the ATMEGA328P-PU, MCP6004-E/P, LM7805 and IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nano wallscout Atmega328P KiCad files?
From the bt-soft/nano-wallscout repository on GitHub, at the commit this page was made from: the board is kicad/nano-wallscout-Atmega328P/nano-wallscout-Atmega328P.kicad_pcb and its schematic kicad/nano-wallscout-Atmega328P-handheld/nano-wallscout-Atmega328P-handheld.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nano wallscout Atmega328P design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).