2 layers46.5 × 76.5 mm
CapBank
MagGenix/AMF-Generator
A digitally controlled push-pull converter designed for generation of an alternating magnetic field (AMF). THIS DESIGN IS INCOMPLETE.
37 partsCERN-OHL-S-2.0
4 layers76.5 × 76.5 mm
AMF Generator
MagGenix/AMF-GeneratorA digitally controlled push-pull converter designed for generation of an alternating magnetic field (AMF). THIS DESIGN IS INCOMPLETE.
- Size
- 76.5 × 76.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 76
- Nets
- 51
- Pads
- 288
- Tracks, vias
- 198, 485
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Jul 2023
- Updated
- 27 Jan 2025
Overview
AMF Generator is an open-source printed circuit board by MagGenix, from the MagGenix/AMF-Generator repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 4-layer board of 76.5 × 76.5 mm with 76 parts on 51 nets, routed with 198 tracks and 485 vias.
It is built around the 74LVC1G06Z, ACS732KLATR-75AB-T and ADC101C027CIMK, with the UCC21540DW, LSF0102DP and ISC012N04LM6ATMA1 among its other parts. Its parts include 22 resistors, 19 capacitors, 9 ICs, 5 diodes and 5 connectors.
Main components
7
74LVC1G06Z
SOT-553-5-40℃~+150℃ 1 1 1.65V~5.5V 1.7ns@5V,50pF 10uA 32mA 74LVC Open-drain Unidirectional SOT-553-5 Inverters ROHSDiodes IncorporatedBuffer/Driver/Transceiver
ACS732KLATR-75AB-T
SOIC-16-300mil-40℃~+125℃ 1MHz 1mΩ 200ns 26.6mV/A 3600Vrms 4.75V~5.25V 75A Support SOIC-16-300mil Current Sensors ROHSAllegro MicroSystems, LLCCurrent Sensors
ADC101C027CIMK
TSOT-23-6-40℃~+105℃ 0.5LSB 1 10 100kHz~3.4MHz、3.4MHz 188.9kHz 2.7V~5.5V 500nA 61.8dB Built-in I2C SAR TSOT-23-6 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)UCC21540DW
SOIC-16-300mil-40℃~+125℃@(Ta) 0.8V~1.2V 1.2V~2V 125kV/us 12ns 16ns 2 2mA 33ns 33ns 3V~18V 4A 5700 6A 9.2V~25V MOSFET、IGBT SOIC-16-300mil Isolators - Gate Drivers ROHSTexas InstrumentsIsolators - Gate Drivers
LSF0102DP
TSSOP82-Bit Bidirectional Multi-Voltage Level Translator; Open-Drain; Push-PullNexperiaUncategorised
ISC012N04LM6ATMA1
SON-8(5x6)-55℃~+175℃ 1 N-channel 1.2mΩ@10V 1.6V 238A 25nC@10V 3W 4.6nF 40V 54pF SON-8(5x6) MOSFETs ROHSInfineon TechnologiesMOSFETs
V30K45-M3/H
FlatPAK5x6-8L-40℃~+150℃ 1 Independent 240A 2mA@45V 30A 45V 630mV@30A FlatPAK5x6-8L Schottky Diodes ROHSVishay IntertechnologySchottky Diodes
README
README.mdAMF Generator
A digitally controlled push-pull converter designed for generation of an alternating magnetic field (AMF). THIS DESIGN IS INCOMPLETE. Design specifications had included an operating frequency of 10-1000 kHz, output currents between 0-10A, and a system operating voltage of 12V.
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C3, C5, C31, C32, C33, C34, C37 |
| 7 | TestPoint | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7 |
| 6 | 1K | Resistor_SMD:R_0805_2012Metric | R3, R6, R7, R12, R13, R17 |
| 6 | 1uF | Capacitor_SMD:C_0805_2012Metric | C24, C25, C26, C30, C35, C36 |
| 5 | 5.6K | Resistor_SMD:R_0805_2012Metric | R14, R18, R19, R20, R21 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2, H3, H4 |
| 3 | LED | LED_SMD:LED_0805_2012Metric | D3, D4, D5 |
| 2 | 100 | Resistor_SMD:R_0805_2012Metric | R2, R5 |
| 2 | 4.7 | Resistor_SMD:R_0805_2012Metric | R1, R4 |
| 2 | ISC012N04LM6ATMA1 | Package_DFN_QFN:PQFN-8-EP_6x5mm_P1.27mm_Generic | Q1, Q2 |
| 2 | V30K45 | Package_DFN_QFN:PQFN-8-EP_6x5mm_P1.27mm_Generic | D1, D2 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric | C27 |
| 1 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C4 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C29 |
| 1 | 1nF | Capacitor_SMD:C_0805_2012Metric | C22 |
| 1 | 2.2nF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 200K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22 |
| 1 | 24.9K | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 260 | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 2K | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 3.3K | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 600 | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 74LVC1G06 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U8 |
| 1 | ACS732KLATR-75AB | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U1 |
| 1 | ADC101C027CIMK | Package_TO_SOT_SMD:SOT-23-6 | U7 |
| 1 | ADDR_JUMPER | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | CAT3200-5 | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | CUR_SENSE | BarrierBlock:0389690002 | J2 |
| 1 | Driver-Disable | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | I2C_3V3 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | I2C_5V | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | LSF0102 | Package_SO:SSOP-8_2.95x2.8mm_P0.65mm | U6 |
| 1 | LT1880 | Package_TO_SOT_SMD:TSOT-23-5 | U4 |
| 1 | LTC1968 | Package_SO:MSOP-8_3x3mm_P0.65mm | U3 |
| 1 | MCU_Disable | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP3 |
| 1 | PWR_IN | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | QTPY | QTPY:QTPY-RP2040 | U9 |
| 1 | SW_OUT | BarrierBlock:0389690002 | J1 |
| 1 | UCC21540 | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U2 |
More from MagGenix/AMF-Generator
2- 4 layers57 × 77 mm
Transformer
MagGenix/AMF-Generator
A digitally controlled push-pull converter designed for generation of an alternating magnetic field (AMF). THIS DESIGN IS INCOMPLETE.
7 partsCERN-OHL-S-2.0
Similar boards
- 2 layers100 × 50 mm
- 2 layers17.9 × 26.2 mm
LevelTranslatorXiaoRp2040
xyphro/I3CBlaster
Raspberry pico / RP2040 based USB to I3C converter with Python support
16 parts96MIT - 2 layers22 × 10 mm
Laser sensor
prusa3d/PRUSA_Laser_filament_sensor
Filament presence and velocity detection using a PAT9125EL optical laser movement sensor, operating at 850nm.
13 parts31 - 6 layers34 × 30.2 mm
USB LiDAR VL53L9
RemiFM/USB-LiDAR-VL53L9
USB accessory device with VL53L9 Time of Flight sensor (dToF 3D LiDAR) & 6-axis IMU
72 parts24MIT - 4 layers143 × 55 mm
- 6 layers177.7 × 96.6 mm
Centrifuge
vgacentrifuge/pcb
The repository for designing the PCB for the VGA-mixer in TDT4295
399 parts1 - 4 layers130 × 80 mm
LoRa Water Quality Management System Sensor Node
msharp176/LoRa-Water-Quality-Management-System
Repository for the LoRa Water Quality Management System, Penn State Harrisburg Senior Electrical Engineering Capstone Design Course, Fall 2025
162 parts - 8 layers120 × 75 mm
Questions
How big is the AMF Generator PCB?
It measures 76.5 × 76.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the AMF Generator use?
76 parts, built around the 74LVC1G06Z, ACS732KLATR-75AB-T, ADC101C027CIMK and UCC21540DW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AMF Generator KiCad files?
From the MagGenix/AMF-Generator repository on GitHub, at the commit this page was made from: the board is AMF-Generator.kicad_pcb and its schematic AMF-Generator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AMF Generator design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).