

Base18
Schematics and files for MoaT IoT things
- Size
- 140.4 × 84.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 180
- Nets
- 198
- Pads
- 694
- Tracks, vias
- 2,302, 469
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Aug 2017
- Updated
- 28 Oct 2026
Overview
Base18 is an open-source printed circuit board by M-o-a-T, from the M-o-a-T/moat-hardware repository on GitHub. It is a 2-layer board of 140.4 × 84.9 mm with 180 parts on 198 nets, routed with 2,302 tracks and 469 vias.
It is built around the ESP32-WROOM-32, TSR 1-48120WI and DMP2035U, with the DMN2058U among its other parts. Its parts include 70 resistors, 43 capacitors, 21 transistors, 14 connectors and 12 ICs. It belongs with the ESP32 and RP2040 boards of this library.
Main components
4ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesTSR 1-48120WI
SIP,12.1x8.6mm-40℃~+80℃ 1 12.1mm 12V 17.5mm 17V~72V 1A 50mVp-p 660uF 8.6mm 93% Short Circuit Protection、Overheat protection、Overvoltage protection ±2% SIP,12.1x8.6mm DC-DC Power Modules ROHSTRACO POWERDC-DC Power ModulesDMP2035U
SOT-23-55℃~+150℃ 1 P-Channel 1.61nF 145pF 15.4nC@4.5V 157pF 20V 23mΩ@4.5V、30mΩ@2.5V、41mΩ@1.8V 3.6A 700mV 810mW SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsDMN2058U
SOT-23-55℃~+150℃ 1 N-channel 1.2V 20V 281pF 3.6nC@4.5V 39pF 4.6A 40mΩ@4.5V 740mW SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
README
README.rst============= MoaT Hardware
This is the collection of files for the physical side of MoaT: Schematics and layouts (kicad), Enclosures (OpenSCAD).
++++++++++++++++ Up-to-date stuff ++++++++++++++++
BMS
Controller and module for battery management.
The hardware design supports both active-high (diyBMS) and active-low (MoaT) serial connections.
Wire
Connect some wires to the MoaT board.
misc
Random stuff (Enocean adapter, USB intercept, …).
adapt
+++++++++ Old stuff +++++++++
CPUs
The proc/ directory contains CPU boards, i.e. things that have a bus plug.
CPUs are responsible for adapting 1wire (5V) and MoaTbus (12V) to their internal voltage.
Boards
The board/ directory contains everything that has a bus socket, i.e.
interfaces to the Real World.
Many of these boards have 12V-MoaTbus, 5V-1wire, and/or 3.3V-I2C connectors.
The boards are not responsible for translating voltages to the (commonly) 3.3V which CPUs expect.
Breadboard ++++++++++
The most important part. Use this to test CPUs.
Heating +++++++
This board has two transistors to switch one or two 24V radiator valves (PPM).
Smoke detector ++++++++++++++
This board fits into a Gira Dual or Q smoke detector.
Old stuff
The old/ directory contains things I need to clean up.
+++++++++ Licensing +++++++++
(Almost) all files in this archive are (c) 2021-2022 by Matthias Urlichs. They are licensed under the GNU General Public License, V3.
This means: if you use any these files to build something which you sell or give to somebody else, you're required to make the schematics, layouts, design files, and source code of the resulting product available.
Developing these devices takes time and money. Thus, while using all or part of this achive commercially is OK, their creators hereby humbly ask for adequate financial remuneration if you use any of these files for monetary gain. Thank you.
License exception +++++++++++++++++
The battery module in the bms/cell subdirectory has originally been
designed by Stuart Pittaway. It is governed by a Creative Commons
Attribution-NonCommercial-ShareAlike 2.0 UK: England/Wales license. See the
file bms/cell/LICENSE for details.
Parts
180| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | CP_100n_50V_0603 | Capacitor_SMD:C_0603_1608Metric | C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C26, C28, C29 +15 |
| 20 | R_100_0603 | Resistor_SMD:R_0603_1608Metric | R10, R12, R14, R17, R20, R23, R26, R29, R32, R35, R38, R41, R44, R47, R50, R53 +4 |
| 19 | DMP2035U | Package_TO_SOT_SMD:SOT-23 | Q3, Q4, Q5, Q6, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21 +3 |
| 18 | R_2.5_10W | localstuff:R_Radial_Power_L12.5mm_W9.0mm_P5.00mm | R13, R16, R19, R22, R25, R28, R31, R34, R37, R40, R43, R46, R49, R52, R55, R58 +2 |
| 18 | R_3k3_0603 | Resistor_SMD:R_0603_1608Metric | R11, R15, R18, R21, R24, R27, R30, R33, R36, R39, R42, R45, R48, R51, R54, R57 +2 |
| 6 | C_1µ_25V_0603 | Capacitor_SMD:C_0603_1608Metric | C34, C35, C36, C37, C38, C41 |
| 6 | R_10k_0603 | Resistor_SMD:R_0603_1608Metric | R68, R69, R70, R71, R72, R73 |
| 4 | TestPoint_Small | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4 |
| 3 | Bat12V | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3 |
| 3 | CP_1µ_10V_0603 | Capacitor_SMD:C_0603_1608Metric | C23, C24, C25 |
| 3 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4, J5, J13 |
| 3 | R_1M_0603 | Resistor_SMD:R_0603_1608Metric | R1, R4, R62 |
| 2 | 4051 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U8, U9 |
| 2 | Conn_01x02_Female | localstuff:Esto02 | J3, JCAN1 |
| 2 | DMN2058U | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | R_5k1_0603 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 1 | |||
| 1 | 1N4448 | Diode_SMD:D_SOD-123 | D2 |
| 1 | ADBMS1818 | Package_QFP:LQFP-64-1EP_10x10mm_P0.5mm_EP5x5mm_ThermalVias | U3 |
| 1 | AZ1117-3.3 | Package_TO_SOT_SMD:SOT-223 | U12 |
| 1 | AZ1117-5.0 | Package_TO_SOT_SMD:SOT-223 | U5 |
| 1 | CP_10µ_100V_6m3 | Capacitor_SMD:CP_Elec_6.3x7.7 | C1 |
| 1 | CP_1µ_100V_0805 | Resistor_SMD:R_0805_2012Metric | C27 |
| 1 | CP_22m_16V | Capacitor_THT:CP_Radial_D22.0mm_P10.00mm_SnapIn | C2 |
| 1 | Conn_01x02_Female | localstuff:Conn_P5.0mm_2_Lumberg | J6 |
| 1 | Conn_01x03_Socket | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J14 |
| 1 | Conn_01x09 | Connector_PinSocket_2.00mm:PinSocket_1x09_P2.00mm_Horizontal | J12 |
| 1 | Conn_01x10 | Connector_PinSocket_2.00mm:PinSocket_1x10_P2.00mm_Horizontal | J11 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J9 |
| 1 | Conn_02x11_Odd_Even | Connector_PinHeader_2.00mm:PinHeader_2x11_P2.00mm_Vertical | J10 |
| 1 | Conn_02x12_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Vertical | J8 |
| 1 | Conn_LEM_3 | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J1 |
| 1 | Conn_LEM_5 | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J2 |
| 1 | D_TVS_100V | Diode_SMD:D_SMB | D1 |
| 1 | ESP32-WROOM | localstuff:ESP32-WROOM | U10 |
| 1 | FuseHolder | Fuse:Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1 |
| 1 | LT1785xS8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U11 |
| 1 | MCP2515-xSO | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U7 |
| 1 | MCP2562-E-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | OSHW-Logo2_7.3x6mm_Copper | Symbol:OSHW-Logo2_7.3x6mm_Copper | OSHW Cu |
| 1 | OSHW-Logo2_7.3x6mm_SilkScreen | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | OSHW Silk |
| 1 | Pico | localstuff:RPi_Pico_SMD | U4 |
| 1 | R_1k_0603 | Resistor_SMD:R_0603_1608Metric | R61 |
| 1 | R_22k_0603 | Resistor_SMD:R_0603_1608Metric | R64 |
| 1 | R_33_0603 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | STH05_12 | localstuff:STH05 | U2 |
| 1 | TSR_1-48120WI | localstuff:TSR_1-48xxWI | U1 |
The 173 most common of 180 parts.
More from M-o-a-T/moat-hardware
12- 2 layers56 × 65 mm

- 2 layers49 × 162.8 mm

- 2 layers78.5 × 104.5 mm

- 4 layers41.2 × 32.7 mm

- 2 layers56.8 × 52.4 mm

- 2 layers54.4 × 67 mm

- 2 layers30 × 53.9 mm

- 2 layers41.2 × 35.3 mm

- 4 layers46.9 × 17.4 mm

- 2 layers100 × 80 mm

- 2 layers32 × 52 mm

- 2 layers100 × 80 mm

Similar boards
- 2 layers170 × 170 mm

PowerConditioner
takashi-kubo/PowerConditioner
Switch vehicle power between battery and EDLC.
38 partsMIT - 2 layers89.5 × 52.2 mm

Phantomware
agekoda/phantomware
phantomware Compact, powerful ESP32-S3 platform for IR, NFC, sensors, WiFi & more.
47 parts15 - 2 layers85.5 × 70 mm

V0-Replay-26 PCB A
temporal-community/badge.temporal.io
Open-source firmware, hardware files, docs, and community app registry for the Temporal Replay 2026 Badge.
211 parts8MIT - 4 layers82 × 70 mm

Temporal Badge CHARLIE
Architeuthis-Flux/Temporal-Replay-26-Badge
Community firmware for the Temporal Replay 26 badge
208 parts5Unlicense - 2 layers156 × 146 mm

TrafficLight Kit
littlemanbuilds/Kids_Traffic_Light
Open-source KiCad traffic light STEM kit for learning LEDs, soldering, and ESP32 programming.
232 parts1 - 2 layers76.5 × 76.5 mm

- 2 layers41.5 × 70.3 mm

Esp32-board
danielkurek/imf
Framework for interactive distributed network of luminous devices. Devices are based on ESP32-S3. Framework was developed as part of bachelor thesis at Charles University Faculty of Mathematics and Physics (Prague…
51 parts - 2 layers28 × 13.5 mm

Questions
How big is the Base18 PCB?
It measures 140.4 × 84.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Base18 use?
180 parts, built around the ESP32-WROOM-32, TSR 1-48120WI, DMP2035U and DMN2058U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Base18 KiCad files?
From the M-o-a-T/moat-hardware repository on GitHub, at the commit this page was made from: the board is bms/base18/base18.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Base18 design in my own project?
Its repository states no licence, so its author keeps all rights: ask M-o-a-T before reusing the design.