Skip to the content
123

DMN2058U

Diodes IncorporatedExtended

-55℃~+150℃ 1 N-channel 1.2V 20V 281pF 3.6nC@4.5V 39pF 4.6A 40mΩ@4.5V 740mW SOT-23 MOSFETs ROHS

Part id
diodes/DMN2058U
Category
MOSFETs
Package
SOT-23
Pins
3
In stock
620 at JLCPCB (C5245280)
Used on
10 open-source boards

Overview

The DMN2058U is a MOSFET made by Diodes Incorporated in a SOT-23 package with 3 pins. -55℃~+150℃ 1 N-channel 1.2V 20V 281pF 3.6nC@4.5V 39pF 4.6A 40mΩ@4.5V 740mW SOT-23 MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Transistor_FET:DMN2058U, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 620 are in stock at JLCPCB (part C5245280). 10 open-source boards in 8 repositories on GitHub use it.

Symbol

123
Transistor_FET:DMN2058UFrom KiCad's library

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

From the datasheet

14
Drain-source, most
20 V · VDSS, absolute maximum · p. 2
Gate-source, most
12 V · VGSS, absolute maximum magnitude, ±12 V · p. 2
Drain current, most
4.6 A · continuous maximum at TA = +25°C, VGS = 10V, Note 6 mounting · p. 2
Junction, hottest
150 °C · TJ, maximum operating junction temperature · p. 2
Junction to air (SOT23)
172 K/W · steady state, minimum recommended pad layout, Note 5 · p. 2
Junction to air (SOT23)
111 K/W · steady state, thermal bias to bottom layer 1-inch square copper plate, Note 6 · p. 2
Gate threshold
600 mV · typical, VDS = VGS, ID = 250uA · p. 2
On resistance
35 mΩ · max, VGS = 10V, ID = 6.0A · p. 2
On resistance
40 mΩ · max, VGS = 4.5V, ID = 5.0A · p. 2
On resistance
60 mΩ · max, VGS = 2.5V, ID = 4.0A · p. 2
On resistance
91 mΩ · max, VGS = 1.8V, ID = 2.0A · p. 2
Forward voltage
700 mV · body diode typical, IS = 1A, VGS = 0V · p. 2
Forward current, most
1.2 A · body diode maximum, Note 6 mounting · p. 2
Edge
3.3 ns · typical fall time, VGS = 4.5V, VDD = 10V, RG = 6Ω, ID = 6.0A · p. 2

What it is and has

5
Device
20V N-channel enhancement mode MOSFET · p. 1
Package
SOT23 · p. 1
Compliance
Totally lead-free and fully RoHS compliant · p. 1
Material
Halogen- and antimony-free · p. 1
Moisture Sensitivity
Level 1 per J-STD-020 · p. 1

Specifications

34
ParameterConditionsAs printedPage
Drain-Source Voltage VDSSTA = +25°C unless otherwise specifiedmax 20 V2
Gate-Source Voltage VGSSTA = +25°C; bipolar limit ±12 Vmin -12 · max 12 V2
Continuous Drain Current (Note 6) IDVGS = 10V, steady state, TA = +25°C; Note 6 mountingmax 4.6 A2
Continuous Drain Current (Note 6) IDVGS = 10V, steady state, TA = +70°C; Note 6 mountingmax 3.7 A2
Maximum Body Diode Forward Current (Note 6) ISTA = +25°C; Note 6 mountingmax 1.2 A2
Pulsed Drain Current (10us Pulse, Duty Cycle = 1%) IDMTA = +25°C; 10us pulse, duty cycle = 1%max 24 A2
Power Dissipation (Note 5) PDFR-4 substrate PC board, 2oz copper, minimum recommended pad layoutmax 0.74 W2
Thermal Resistance, Junction to Ambient (Note 5) RθJASOT23; steady state; FR-4 substrate PC board, 2oz copper, minimum recommended pad layoutmax 172 °C/W2
Power Dissipation (Note 6) PDFR-4 substrate PC board, 2oz copper, thermal bias to bottom layer 1-inch square copper platemax 1.13 W2
Thermal Resistance, Junction to Ambient (Note 6) RθJASOT23; steady state; FR-4 substrate PC board, 2oz copper, thermal bias to bottom layer 1-inch square copper platemax 111 °C/W2
Operating and Storage Temperature Range TJ, TSTGmin -55 · max 150 °C2
Drain-Source Breakdown Voltage BVDSSTA = +25°C, VGS = 0V, ID = 250uA; Note 7min 20 V2
Zero Gate Voltage Drain Current IDSSTA = +25°C, VDS = 20V, VGS = 0V; Note 7max 1 uA2
Gate-Source Leakage IGSSTA = +25°C, VGS = ±12V, VDS = 0V; maximum magnitude ±100 nA; Note 7max 100 nA2
Gate Threshold Voltage VGS(TH)TA = +25°C, VDS = VGS, ID = 250uA; Note 7min 0.4 · typ 0.6 · max 1.2 V2
Static Drain-Source On-Resistance RDS(ON)TA = +25°C, VGS = 10V, ID = 6.0A; Note 7typ 27 · max 35 mΩ2
Static Drain-Source On-Resistance RDS(ON)TA = +25°C, VGS = 4.5V, ID = 5.0A; Note 7typ 30 · max 40 mΩ2
Static Drain-Source On-Resistance RDS(ON)TA = +25°C, VGS = 2.5V, ID = 4.0A; Note 7typ 37 · max 60 mΩ2
Static Drain-Source On-Resistance RDS(ON)TA = +25°C, VGS = 1.8V, ID = 2.0A; Note 7typ 49 · max 91 mΩ2
Diode Forward Voltage VSDTA = +25°C, VGS = 0V, IS = 1A; Note 7typ 0.7 · max 1.2 V2
Input Capacitance CISSTA = +25°C, VDS = 10V, VGS = 0V, f = 1.0MHz; Note 8typ 281 pF2
Output Capacitance COSSTA = +25°C, VDS = 10V, VGS = 0V, f = 1.0MHz; Note 8typ 50 pF2
Reverse Transfer Capacitance CRSSTA = +25°C, VDS = 10V, VGS = 0V, f = 1.0MHz; Note 8typ 39 pF2
Gate Resistance RGTA = +25°C, VDS = 0V, VGS = 0V, f = 1.0MHz; Note 8typ 3.1 Ω2
Total Gate Charge (VGS = 4.5V) QGTA = +25°C, VDS = 10V, ID = 6.0A; Note 8typ 3.6 nC2
Total Gate Charge (VGS = 10V) QGTA = +25°C, VDS = 10V, ID = 6.0A; Note 8typ 7.7 nC2
Gate-Source Charge QGSTA = +25°C, VDS = 10V, ID = 6.0A; Note 8typ 0.5 nC2
Gate-Drain Charge QGDTA = +25°C, VDS = 10V, ID = 6.0A; Note 8typ 0.9 nC2
Turn-On Delay Time tD(ON)TA = +25°C, VGS = 4.5V, VDD = 10V, RG = 6Ω, ID = 6.0A; Note 8typ 2 ns2
Turn-On Rise Time tRTA = +25°C, VGS = 4.5V, VDD = 10V, RG = 6Ω, ID = 6.0A; Note 8typ 4.9 ns2
Turn-Off Delay Time tD(OFF)TA = +25°C, VGS = 4.5V, VDD = 10V, RG = 6Ω, ID = 6.0A; Note 8typ 9.9 ns2
Turn-Off Fall Time tFTA = +25°C, VGS = 4.5V, VDD = 10V, RG = 6Ω, ID = 6.0A; Note 8typ 3.3 ns2
Body Diode Reverse Recovery Time tRRTA = +25°C, IF = 6.0A, di/dt = 100A/us; Note 8typ 5.4 ns2
Body Diode Reverse Recovery Charge QRRTA = +25°C, IF = 6.0A, di/dt = 100A/us; Note 8typ 0.7 nC2

Ordering codes, by the datasheet

2
DMN2058U-7
SOT23 · 3,000/Tape & Reel · p. 1
DMN2058U-13
SOT23 · 10,000/Tape & Reel · p. 1

Open-source boards using it

10See all 10
  • 2 layers89.5 × 52.2 mmPhantomware, the printed circuit board in 3D

    Phantomware

    agekoda/phantomware

    phantomware Compact, powerful ESP32-S3 platform for IR, NFC, sensors, WiFi & more.

    47 parts15
  • 2 layers85.5 × 70 mmV0-Replay-26 PCB A, the printed circuit board in 3D

    V0-Replay-26 PCB A

    temporal-community/badge.temporal.io

    Open-source firmware, hardware files, docs, and community app registry for the Temporal Replay 2026 Badge.

    211 parts8MIT
  • 4 layers82 × 70 mmTemporal Badge CHARLIE, the printed circuit board in 3D

    Temporal Badge CHARLIE

    Architeuthis-Flux/Temporal-Replay-26-Badge

    Community firmware for the Temporal Replay 26 badge

    208 parts5Unlicense
  • 2 layers156 × 146 mmTrafficLight Kit, the printed circuit board in 3D

    TrafficLight Kit

    littlemanbuilds/Kids_Traffic_Light

    Open-source KiCad traffic light STEM kit for learning LEDs, soldering, and ESP32 programming.

    232 parts1
  • 2 layers76.5 × 76.5 mmEdge AI Badge Main, the printed circuit board in 3D

    Edge AI Badge Main

    LyndLabs/Edge-AI-Badge

    Edge AI Foundation Badge - hardware files :)

    136 parts1
  • 2 layers41.5 × 70.3 mmEsp32-board, the printed circuit board in 3D

    Esp32-board

    danielkurek/imf

    Framework for interactive distributed network of luminous devices. Devices are based on ESP32-S3. Framework was developed as part of bachelor thesis at Charles University Faculty of Mathematics and Physics (Prague…

    51 parts
  • 2 layers28 × 13.5 mmPcb blheli s, the printed circuit board in 3D

    Pcb blheli s

    kyuhyong/blheli_hw

    27 parts
  • 2 layers140.4 × 84.9 mmBase18, the printed circuit board in 3D

    Base18

    M-o-a-T/moat-hardware

    Schematics and files for MoaT IoT things

    180 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the DMN2058U?

Yes. The symbol is Transistor_FET:DMN2058U and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DMN2058U?

SOT-23, with 3 pins. Its footprint is drawn on this page.

Where is the DMN2058U datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the DMN2058U?

JLCPCB lists it as part C5245280, with 620 in stock; the sellers' links on this page open their listings.

What can replace the DMN2058U?

Parts like it in the library: the AO3400 by GOODWORK, the AO3400A by Alpha & Omega Semiconductor, the AO3400A by UMW and the AO3400 by Guangdong Hottech. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DMN2058U?

10 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.