danielkurek/imfFramework for interactive distributed network of luminous devices. Devices are based on ESP32-S3. Framework was developed as part of bachelor thesis at Charles University Faculty of Mathematics and Physics (Prague…
Esp32-board is an open-source printed circuit board by danielkurek, from the danielkurek/imf repository on GitHub. It is a 2-layer board of 41.5 × 70.3 mm with 51 parts on 58 nets, routed with 597 tracks and 104 vias.
It is built around the ESP32-S3-WROOM-1-N8, IRLML6401 and DMN2058U, with the MBR230S1F-7-FS and SK6812 among its other parts. Its parts include 9 capacitors, 8 resistors, 6 diodes, 5 connectors and 3 transistors. It belongs with the ESP32 boards of this library.
Framework for interactive distributed network of luminous devices. Devices are based on ESP32-S3. Framework was developed as part of bachelor thesis at Charles University Faculty of Mathematics and Physics (Prague, Czech Republic).
Author: Daniel Kurek 09.05.2024
boards - source files for devices designed for this framework (official dev modules can also be used)distance-analysis - analysis of WiFi FTM distance measurement (with measured data)mesh-visualizer - helper application for visualization of positions of devices and control states of devices through Bluetooth meshresult - results from testing of the framework on example applicationsrc - source code of the framework| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C15, C17 |
| 3 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R32 |
| 3 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C14, C18 |
| 3 | 5k1 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R11 |
| 3 | LESD5D5 | Diode_SMD:D_SOD-323_HandSoldering | D1, D2, D3 |
| 3 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP1, JP2, JP5 |
| 2 | 47k | Resistor_SMD:R_Array_Convex_4x1206 | RN1, RN2 |
| 2 | IRLML6401 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 2M | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
| 1 | 800k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9 |
| 1 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J5 |
| 1 | DMN2058U | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | ESP32-S3-WROOM-1 | PCM_Espressif:ESP32-S3-WROOM-1 | U1 |
| 1 | LCD_DISPLAY_ST7735 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | DP1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D15 |
| 1 | MBR230S1F-7 | Diode_SMD:D_SOD-123F | D4 |
| 1 | Micro_SD_Card_Det2 | GCT_MEM2061:GCT_MEM2061-01-188-00-A_REVA | J4 |
| 1 | NCP186-3V3 | Custom:XDFN8 | U2 |
| 1 | SK6812 | LED_SMD:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D5 |
| 1 | UART | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
danielkurek/imf
Framework for interactive distributed network of luminous devices. Devices are based on ESP32-S3. Framework was developed as part of bachelor thesis at Charles University Faculty of Mathematics and Physics (Prague…
oomlout/oomlout_oomp_project_bot_v_2
temporal-community/badge.temporal.io
Open-source firmware, hardware files, docs, and community app registry for the Temporal Replay 2026 Badge.
Architeuthis-Flux/Temporal-Replay-26-Badge
Community firmware for the Temporal Replay 26 badge
agekoda/phantomware
phantomware Compact, powerful ESP32-S3 platform for IR, NFC, sensors, WiFi & more.
littlemanbuilds/Kids_Traffic_Light
Open-source KiCad traffic light STEM kit for learning LEDs, soldering, and ESP32 programming.
It measures 41.5 × 70.3 mm and has 2 copper layers, 1.6 mm thick.
51 parts, built around the ESP32-S3-WROOM-1-N8, IRLML6401, DMN2058U and MBR230S1F-7-FS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the danielkurek/imf repository on GitHub, at the commit this page was made from: the board is boards/esp32-s3-main/esp32-board.kicad_pcb and its schematic boards/esp32-s3-main/esp32-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask danielkurek before reusing the design.