2 layers85.5 × 70 mm
V0-Replay-26 PCB A
temporal-community/badge.temporal.io
Open-source firmware, hardware files, docs, and community app registry for the Temporal Replay 2026 Badge.
211 parts8MIT
2 layers89.5 × 52.2 mm
Phantomware
agekoda/phantomware15phantomware Compact, powerful ESP32-S3 platform for IR, NFC, sensors, WiFi & more.
- Size
- 89.5 × 52.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 61
- Pads
- 128
- Tracks, vias
- 634, 145
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 Jun 2025
- Updated
- 22 Oct 2026
Overview
Phantomware is an open-source printed circuit board by agekoda, from the agekoda/phantomware repository on GitHub. It is a 2-layer board of 89.5 × 52.2 mm with 47 parts on 61 nets, routed with 634 tracks and 145 vias.
It is built around the TF-15X15, VSMY14940 and DMN2058U, with the TS-1088-AR02016 among its other parts. Its parts include 19 resistors, 5 diodes, 4 capacitors, 2 ICs and 2 transistors. It belongs with the radio and wireless boards of this library.
Main components
4
TF-15X15
SMD-25℃~+85℃ 2mm Connector and Ejector MicroSD Card (TF Card) Push-Push Yes SMD SD Card / Memory Card Connector ROHSSOFNGSD Card / Memory Card Connector
VSMY14940
SMD,3x2.5mm-40℃~+85℃ 1.48V 119mW 15mW/sr、90mW/sr、560mW/sr 55nm 5V 70mA 940nm 9° SMD,3x2.5mm Infrared LED Emitters ROHSVishay IntertechnologyInfrared LED Emitters
DMN2058U
SOT-23-55℃~+150℃ 1 N-channel 1.2V 20V 281pF 3.6nC@4.5V 39pF 4.6A 40mΩ@4.5V 740mW SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
TS-1088-AR02016
SMD,4x3mm-30℃~+80℃ 1.6N 100,000 cycles 12V 2mm 3.9mm 3mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile Switches
README
README.md
phantomware
Compact, powerful ESP32-S3 platform for IR, NFC, sensors, WiFi & more.
🔥 Overview
Phantomware is a fully custom-built multi-tool device based on the ESP32-S3, designed for wireless analysis, signal interaction, and hardware experimentation.
It combines RF, GPIO, IR, and NFC capabilities into a portable platform featuring a 240×320 TFT display, SD card storage, and a 3000mAh battery system with a full charging circuit, MAX17055 fuel gauge, and built-in overcharge and overcurrent protection.
With 6 navigation buttons and a modular software framework, Phantomware is built for advanced IoT development, prototyping, and hardware exploration.
Phantomware vs. Flipper Zero
| Feature | Phantomware | Flipper Zero |
|---|---|---|
| Microcontroller | ESP32-S3 Dual-core Xtensa LX7 | STM32WB55RG |
| Bluetooth and WiFi? | Bluetooth 5 & WiFi 4 | Bluetooth 5.4 |
| Display | 2" 240x320 TFT LCD | 1.4" 128x64 Monochrome |
| IR Transceiver | 3x VSMY14940 LEDs + TSOP75348WTR | 3x VSMY14940 + TSOP75338TR |
| NFC Support | PN532 via SPI | ST25R3916 |
| Battery & Power Mgmt | 3000mAh LiPo + TP4056 + MAX17055 | 2100mAh + BQ25896 + BQ27220 |
| Expansion Options | Micro SD + 16 GPIOs | Micro SD + 18 GPIOs |
| Target Use Case | Signal analysis, RFID/NFC, IR, tinkering | Sub-GHz, RFID/NFC, IR, utility |
| Open Source? | Open Source & fully customisable | Open Source with limitations |
| Typical Price Point | ~$50 USD | ~$200 USD |
[!NOTE] Information for Flipper Zero is based on publicly available specifications and may vary.
🚀 Features
🔌 GPIO Toolkit
- PWM signal generator
- Oscilloscope
- Frequency analyser
- Voltmeter
- Resistor calculator
- USB to UART bridge
📡 WiFi Tools (educational use only)
- Network scan
- Packet monitor
- Spectrum waterfall
- Deauthentication Attack
- Beacon spam
- Evil portal / Captive portal
- Access point hosting
- Connect to AP and host HTML
📶 Bluetooth Tools
- BLE scanning
- Device advertisement spam (Apple / Samsung / Windows)
⌨️ HID Tools
- BadUSB
- BadBT (Bluetooth HID attacks)
💬 Communication
- ESP-NOW messaging
- NRF24-based chat system
🧩 Expansion Support
- GPS modules
- PN532 NFC module
- Future GPIO-based add-ons
📸 Versions
v1 prototype based on ESP32 |
v2 based on ESP32-S3 |
v3 based on ESP32-S3 with PCBA and battery |
🚨 Disclaimer
This project is intended for educational and research purposes only.
Do not use this device to interfere with networks, devices, or signals that you do not own or have explicit permission to test. Misuse may violate local laws and regulations.
⚠️ License
Distributed under the MIT License. See LICENSE.txt for more information.
🤝 Contact
Email - hello@designedbykoda.com
Project Link: https://github.com/agekoda/phantomware
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | TestPoint_Pad_D1.5mm | TestPoint:TestPoint_Pad_D1.5mm | ALRT, ALRT, TEMP, TEMP, TEMP |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R8, R15, R18, R19 |
| 3 | 39 | Resistor_SMD:R_0402_1005Metric | R1, R2, R3 |
| 3 | VSMY14940 | LED_SMD:VSMY14940 | LED1, LED2, LED3 |
| 2 | 10 uF | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R17 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R10, R11 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R12, R13 |
| 2 | 560 | Resistor_SMD:R_0402_1005Metric | R14, R16 |
| 2 | GREEN | LED_SMD:LED_0603_1608Metric | LED4, STDBY |
| 2 | RED | LED_SMD:LED_0603_1608Metric | CHRG, LED5 |
| 1 | 0.47 uF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 1.1k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 10 | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 10m | Resistor_SMD:R_0612_1632Metric | R9 |
| 1 | 130 | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 4kHz | Buzzer_Beeper:smd5x5 | BUZZER1 |
| 1 | DMN2058U | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | LOGO | images:phantomware logo | G*** |
| 1 | LOGO | images:qr | G*** |
| 1 | MCP9701AT-E_TT | Sensor:SOT95P237X112-3N | TEMP1 |
| 1 | TF-15X15 | Connector_Card:TF15X15 | J1 |
| 1 | TS-1088-AR02016 | Button_Switch_SMD:TS-1088-AR02016 | RST |
| 1 | ~ | OptoDevice:TSOP75338TR | IR_RX1 |
| 1 | ~ | Battery:TP4056 | U3 |
| 1 | ~ | Transistor_Power_Module:L2N7002KLT1G | Q2 |
| 1 | ~ | Package_SO:MAX17055ETB+ | U5 |
| 1 | ~ | Connector_USB:TYPE-C-SMD_TYPE-C-6P_5 | USB1 |
Similar boards
- 4 layers82 × 70 mm
Temporal Badge CHARLIE
Architeuthis-Flux/Temporal-Replay-26-Badge
Community firmware for the Temporal Replay 26 badge
208 parts5Unlicense - 2 layers76.5 × 76.5 mm
- 2 layers105.2 × 71.1 mm
Onyx PCB
CuriousMotor/Onyx-Stepper-Motherboard
The successor of the iconic Arduino-CNC-shield
96 parts56MIT - 2 layers37.3 × 37 mm
Hexpansion
DanNixon/microsd-hexpansion
Micro SD card hexpansion for the Tildagon badge.
20 parts7CERN-OHL-P-2.0 - 4 layers95.3 × 47 mm
- 2 layers23.4 × 51.1 mm
Bled pico w backpack
DanNixon/bled
Versatile control board for WS2812 compatible LED fixtures. Using WebAssembly for effects and Bluetooth Low Energy for control.
40 partsMIT - 4 layers114.8 × 72 mm
Tanmantsu zero
badgeteam/konsool-zero
RFID NFC <1GHz radio Konsool expansion board
182 partsBSD-3-Clause
Questions
How big is the Phantomware PCB?
It measures 89.5 × 52.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Phantomware use?
47 parts, built around the TF-15X15, VSMY14940, DMN2058U and TS-1088-AR02016. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Phantomware KiCad files?
From the agekoda/phantomware repository on GitHub, at the commit this page was made from: the board is project files/phantomware/phantomware.kicad_pcb and its schematic project files/buttons/buttons.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Phantomware design in my own project?
Its repository states no licence, so its author keeps all rights: ask agekoda before reusing the design.