Skip to the content
123

DMP2035U

Diodes IncorporatedExtended

-55℃~+150℃ 1 P-Channel 1.61nF 145pF 15.4nC@4.5V 157pF 20V 23mΩ@4.5V、30mΩ@2.5V、41mΩ@1.8V 3.6A 700mV 810mW SOT-23 MOSFETs ROHS

Part id
diodes/DMP2035U
Category
MOSFETs
Package
SOT-23
Pins
3
In stock
255,692 at JLCPCB (C110499)
Used on
17 open-source boards

Overview

The DMP2035U is a MOSFET made by Diodes Incorporated in a SOT-23 package with 3 pins. -55℃~+150℃ 1 P-Channel 1.61nF 145pF 15.4nC@4.5V 157pF 20V 23mΩ@4.5V、30mΩ@2.5V、41mΩ@1.8V 3.6A 700mV 810mW SOT-23 MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_PMOS_1G_2S_3D, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 255,692 are in stock at JLCPCB (part C110499). 17 open-source boards in 13 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_PMOS_1G_2S_3DFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

From the datasheet

10
Drain-source, most
20 V · Drain-source voltage, absolute max · p. 2
Gate-source, most
8 V · Gate-source voltage, absolute max magnitude (±8 V) · p. 2
Drain current, most
3.6 A · Continuous drain current, max at TA = +25°C, Note 5 · p. 2
Junction, hottest
150 °C · Operating junction temperature, max · p. 2
Junction to air (SOT23)
153.5 K/W · Junction to ambient at TA = +25°C · p. 2
Gate threshold
700 mV · Gate threshold, typical at VDS = VGS, ID = -250uA · p. 2
On resistance
23 mΩ · Typical at VGS = -4.5V, ID = -4.0A · p. 2
On resistance
30 mΩ · Typical at VGS = -2.5V, ID = -4.0A · p. 2
On resistance
41 mΩ · Typical at VGS = -1.8V, ID = -2.0A · p. 2
Edge
12.4 ns · Rise time, typical at VDS = -10V, VGS = -4.5V, RL = 10Ω, RG = 6.0Ω, ID = -1A · p. 2

What it is and has

5
Operating mode
P-channel enhancement mode MOSFET · p. 1
ESD protection
Up to 3 kV · p. 1
Qualification
AEC-Q101 · p. 1
Package
SOT23 · p. 1
Moisture sensitivity
Level 1 per J-STD-020 · p. 1

Specifications

28
ParameterConditionsAs printedPage
Drain-Source Voltage V DSSTA = +25°Cmax -20 V2
Gate-Source Voltage V GSSTA = +25°C; bipolar rating ±8 Vmin -8 · max 8 V2
Continuous Drain Current (Note 5) IDSteady State; TA = +25°C; device mounted on FR-4 PCB with 2 oz. Copper and test pulse width t ≦10smax -3.6 A2
Continuous Drain Current (Note 5) IDSteady State; TA = +70°C; device mounted on FR-4 PCB with 2 oz. Copper and test pulse width t ≦10smax -2.9 A2
Pulsed Drain Current (Note 6) I DMTA = +25°C; repetitive rating, pulse width limited by junction temperaturemax -24 A2
Power Dissipation (Note 5) PDTA = +25°C; device mounted on FR-4 PCB with 2 oz. Copper and test pulse width t ≦10smax 0.81 W2
Thermal Resistance, Junction to Ambient @T A = +25°C R θJASOT23; TA = +25°Cmax 153.5 °C/W2
Operating and Storage Temperature Range T J , T STGmin -55 · max 150 °C2
Drain-Source Breakdown Voltage BV DSSTA = +25°C; VGS = 0V, ID = -250uA; Note 7min -20 V2
Zero Gate Voltage Drain Current I DSSTJ = +25°C; VDS = -20V, VGS = 0V; Note 7max -1 uA2
Gate-Source Leakage I GSSTA = +25°C; VGS = ±8V, VDS = 0V; maximum specified as ±10 uA; Note 7max 10 uA2
Gate Threshold Voltage V GS(th)TA = +25°C; VDS = VGS, ID = -250uA; Note 7min -0.4 · typ -0.7 · max -1 V2
Static Drain-Source On-Resistance R DS(ON)TA = +25°C; VGS = -4.5V, ID = -4.0A; Note 7typ 23 · max 35 mΩ2
Static Drain-Source On-Resistance R DS(ON)TA = +25°C; VGS = -2.5V, ID = -4.0A; Note 7typ 30 · max 45 mΩ2
Static Drain-Source On-Resistance R DS(ON)TA = +25°C; VGS = -1.8V, ID = -2.0A; Note 7typ 41 · max 62 mΩ2
Forward Transfer Admittance |Y fs |TA = +25°C; VDS = -5V, ID = -4A; Note 7typ 14 S2
Diode Forward Voltage V SDTA = +25°C; VGS = 0V, IS = -1A; Note 7typ -0.7 · max -1 V2
Input Capacitance C issTA = +25°C; VDS = -10V, VGS = 0V, f = 1.0MHz; Note 8typ 1610 pF2
Output Capacitance C ossTA = +25°C; VDS = -10V, VGS = 0V, f = 1.0MHz; Note 8typ 157 pF2
Reverse Transfer Capacitance C rssTA = +25°C; VDS = -10V, VGS = 0V, f = 1.0MHz; Note 8typ 145 pF2
Gate Resistance RgTA = +25°C; VDS = 0V, VGS = 0V, f = 1MHz; Note 8typ 9.45 Ω2
Total Gate Charge QgTA = +25°C; VGS = -4.5V, VDS = -10V, ID = -4A; Note 8typ 15.4 nC2
Gate-Source Charge Q gsTA = +25°C; VGS = -4.5V, VDS = -10V, ID = -4A; Note 8typ 2.5 nC2
Gate-Drain Charge Q gdTA = +25°C; VGS = -4.5V, VDS = -10V, ID = -4A; Note 8typ 3.3 nC2
Turn-On Delay Time t D(on)TA = +25°C; VDS = -10V, VGS = -4.5V, RL = 10Ω, RG = 6.0Ω, ID = -1A; Note 8typ 16.8 ns2
Turn-On Rise Time trTA = +25°C; VDS = -10V, VGS = -4.5V, RL = 10Ω, RG = 6.0Ω, ID = -1A; Note 8typ 12.4 ns2
Turn-Off Delay Time t D(off)TA = +25°C; VDS = -10V, VGS = -4.5V, RL = 10Ω, RG = 6.0Ω, ID = -1A; Note 8typ 94.1 ns2
Turn-Off Fall Time tfTA = +25°C; VDS = -10V, VGS = -4.5V, RL = 10Ω, RG = 6.0Ω, ID = -1A; Note 8typ 42.4 ns2

Ordering codes, by the datasheet

2
DMP2035U-7
SOT23 · Standard compliance; 3000 / 7” Tape & Reel · p. 1
DMP2035UQ-7
SOT23 · Automotive compliance; 3000 / 7” Tape & Reel · p. 1

Open-source boards using it

17See all 17
  • 2 layersHeadlamp, the printed circuit board in 3D

    Headlamp

    kajusK/Darkstar-Mk.II

    High-power bomb-proof headlamp for caving

    60 parts7
  • 2 layers30.5 × 15.2 mmAvr attiny1614-mini, the printed circuit board in 3D

    Avr attiny1614-mini

    vladbelous/avr-attiny1614-mini

    AVR attiny1614 (tinyAVR 1-series) mini board

    26 parts4
  • 4 layers98.2 × 87.1 mmCapstoneReciever, the printed circuit board in 3D

    CapstoneReciever

    jesseUML/CapstonePCBs

    Capstone PCB Files

    43 parts
  • 2 layers22.3 × 49.9 mmBaloon, the printed circuit board in 3D

    Baloon

    kajusK/Picoballoon2020

    Probe for Observatory and Planetarium Brno Picoballoon Challenge 2020

    66 partsGPL-3.0
  • 2 layers143.8 × 80 mmEcu, the printed circuit board in 3D

    Ecu

    kajusK/Pneumobil

    Control and telemetry system for BUT Falcon pneumobil for Aventics Pneumobil competition

    269 parts
  • 2 layers140.4 × 84.9 mmBase18, the printed circuit board in 3D

    Base18

    M-o-a-T/moat-hardware

    Schematics and files for MoaT IoT things

    180 parts
  • 4 layers75 × 50 mmAfo revb main, the printed circuit board in 3D

    Afo revb main

    shadowfax-505/afo-recorder

    AFO research recorder: six EMG and IMU configurations, interactive assembly guides and engineering packages

    126 parts
  • 2 layers50 × 60 mmCurl tracker, the printed circuit board in 3D

    Curl tracker

    terryzhw/curl-tracker

    Curl Tracker is a wearable bicep curl tracker that uses an ESP32-C3 Super Mini alongside a MPU-6500 IMU to count reps, measure curl speed, and evaluate form in real-time.

    55 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the DMP2035U?

Yes. The symbol is Pinmap_Generic:Q_PMOS_1G_2S_3D and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DMP2035U?

SOT-23, with 3 pins. Its footprint is drawn on this page.

Where is the DMP2035U datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the DMP2035U?

JLCPCB lists it as part C110499, with 255,692 in stock; the sellers' links on this page open their listings.

What can replace the DMP2035U?

Parts like it in the library: the AO3400 by GOODWORK, the AP2300 by ALLPOWER, the AO3400A by Alpha & Omega Semiconductor and the AO3400A by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DMP2035U?

17 boards in 13 repositories on GitHub; the most starred are listed on this page, with their KiCad files.