
Vodesht vyzel
LyubomirNachev/Diplomna
Проектиране на сензорна IoT мрежа, използваща протокола Thread.

Проектиране на сензорна IoT мрежа, използваща протокола Thread.
Schematics is an open-source printed circuit board by LyubomirNachev, from the LyubomirNachev/Diplomna repository on GitHub. It is a 2-layer board of 85 × 90 mm with 20 parts on 33 nets, routed with 111 tracks and 2 vias.
It is built around the BME688, BU30TD3WG-TR and LIS3DH, with the NRF52840-DONGLE and TP4056 among its other parts. Its parts include 6 ICs, 4 resistors, 2 capacitors and 1 diode. It belongs with the nRF52 and nRF5x boards of this library.
Проектиране на сензорна IoT мрежа, използваща протокола Thread.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 2 | 100k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3, R4 |
| 2 | 1u | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C1, C2 |
| 2 | 4.7k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
| 1 | 1N5817 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 3.7V Li-ion | custom:BHC-18650-1P | BT1 |
| 1 | BH1750 | custom:BH1750 | U2 |
| 1 | BME688 | custom:BME688 | U3 |
| 1 | BU30TD3WG | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | LIS3DH | custom:LIS3DH | U6 |
| 1 | LOGO | LOGO | G*** |
| 1 | MountingHole | custom:Slot | H5 |
| 1 | NRF52840-DONGLE | custom:MODULE_NRF52840-DONGLE | U5 |
| 1 | TP4056 | custom:TP4056-18650 | U1 |

LyubomirNachev/Diplomna
Проектиране на сензорна IoT мрежа, използваща протокола Thread.


K0nradG/self-balancing-robot
Self-balancing robot powered by nRF52840 and Zephyr RTOS, with BLE control, OTA updates, and a Raspberry Pi camera interface designed for future autonomous navigation.

mrozsebastian/TSDZ2-NRF-module-board
Simple, low component count, inspired by @stsdc

caglarylmz/Personal-PCB-Projects
This repository includes my personal electronic design projects.


teapotlaboratories/bwlr1e
Teapotlabs BWLR1E: Wireless Environmental Sensor with Energy Harvesting from Solar Energy


It measures 85 × 90 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the BME688, BU30TD3WG-TR, LIS3DH and NRF52840-DONGLE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LyubomirNachev/Diplomna repository on GitHub, at the commit this page was made from: the board is Schematics/Schematics.kicad_pcb and its schematic Schematics/Schematics.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask LyubomirNachev before reusing the design.