Skip to the content
4 layers150.5 × 54.4 mmYed eye, the printed circuit board in 3D

This repository includes my personal electronic design projects.

Size
150.5 × 54.4 mm
Copper layers
4
Thickness
1.6 mm
Parts
114
Nets
124
Pads
598
Tracks, vias
2,030, 252
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
23 May 2020
Updated
19 May 2020

Overview

Yed eye is an open-source printed circuit board by caglarylmz, from the caglarylmz/Personal-PCB-Projects repository on GitHub. It is a 4-layer board of 150.5 × 54.4 mm with 114 parts on 124 nets, routed with 2,030 tracks and 252 vias.

It is built around the CP2102N-A01-GQFN24, ESP32-WROOM-32 and N25Q128A13EF840E, with the IS42S16400J-6TL, LD39050PU33R and LIS3DH among its other parts. Its parts include 44 capacitors, 32 resistors, 10 ICs, 10 diodes and 7 connectors. It belongs with the ESP32 and STM32 boards of this library.

Main components

7

Parts

114
QtyValueFootprintReferences
27100nFCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC3, C10, C11, C12, C13, C19, C20, C21, C25, C29, C30, C31, C32, C33, C34, C35 +11
114.7kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR4, R5, R6, R9, R10, R12, R13, R14, R15, R30, R31
1010kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR8, R11, R16, R17, R20, R22, R25, R26, R28, R29
82.2uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC5, C6, C14, C15, C16, C27, C28, C43
61kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR1, R2, R3, R18, R27, R32
4300Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR19, R21, R23, R24
310uFCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC1, C17, C44
3D_SchottkyDiode_SMD:D_SOD-123D4, D5, D6
3D_ZenerDiode_SMD:D_SOD-123D1, D7, D8
3Jumper_NC_SmallJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP1, JP2, JP3
3LED_GREENLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD3, D9, D10
220pFCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC22, C23
24.7uFCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC24, C26
2Q_NPN_BECPackage_TO_SOT_SMD:SOT-23Q2, Q3
2USB_B_MicroConnector_USB:USB_Micro-B_Molex-105133-0031J3, J6
11.2kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR7
115pFCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC2
12.2uFCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC18
18Mhz CrystalCrystal:Crystal_SMD_3215-2Pin_3.2x1.5mmY1
1CP2102N-A01-GQFN24Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mmU6
1Conn_01x02_FemaleConnector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_VerticalJ1
1Conn_01x05_FemaleConnector_PinSocket_1.27mm:PinSocket_2x03_P1.27mm_Vertical_SMDJ7
1Conn_01x07_FemaleConnector_FFC-FPC:Molex_200528-0070_1x07-1MP_P1.00mm_HorizontalJ4
1Conn_01x26_MaleConnector_FFC-FPC:Hirose_FH12-26S-0.5SH_1x26-1MP_P0.50mm_HorizontalJ2
1ESP32-WROOM-32RF_Module:ESP32-WROOM-32U8
1FuseFuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolderF1
1IS42S16400J-6TLIS42S16400J-6TL:SOP80P1176X120-54NU1
1LD39050PU33RPackage_DFN_QFN:DFN-6-1EP_3x3mm_P1mm_EP1.5x2.4mmU2
1LED_REDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD2
1LIS3DHPackage_LGA:LGA-16_3x3mm_P0.5mm_LayoutBorder3x5yU9
1MCP1700-1202E_SOT23Package_TO_SOT_SMD:SOT-23U5
1Micro_SD_Card_DetConnector_Card:microSD_HC_Hirose_DM3D-SFJ5
1N25Q128A13EF840EPackage_DFN_QFN:DFN-8-1EP_6x5mm_P1.27mm_EP2x2mmU3
1NTC_10kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderTH1
1Q_PMOS_GSDPackage_TO_SOT_SMD:SOT-23Q1
1STM32F446ZCTxPackage_QFP:LQFP-144_20x20mm_P0.5mmU7
1SW_PushButton_Switch_THT:SW_PUSH_6mm_H4.3mmSW1
1SW_PushButton_Switch_THT:SW_PUSH_6mm_H5mmSW2
1TP4056Package_SO:SOP-8_3.76x4.96mm_P1.27mmIC1
1TPS782Package_TO_SOT_SMD:SOT-23-5_HandSolderingU4

Similar boards

  • 4 layers114.3 × 86.4 mmLinear window controller, the printed circuit board in 3D

    Linear window controller

    eflukx/Linear-motor-window-controller

    Linear quad/octa motor slide Window controller, featuring absolute position feedback control, motor current monitoring using a ESP32-S3 hi performance controller

    201 parts
  • 4 layers160 × 73.2 mmMainPCB, the printed circuit board in 3D

    MainPCB

    doppelgrau/esp32-f9p-io-board

    An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.

    162 parts39
  • 2 layers65 × 56 mmESP32-Pi, the printed circuit board in 3D

    ESP32-Pi

    singleboardsolutions/Obsidian-ESP32

    Design Files for Obsidian ESP32

    65 parts16
  • 4 layers65.1 × 70 mmESP32-Zip Panelized, the printed circuit board in 3D

    ESP32-Zip Panelized

    vintlabs/ESP32-Zip

    ESP32 Development Module compatible with Pi Zero cases (hardware)

    88 parts10GPL-3.0
  • 4 layers40.1 × 38.1 mmCrazyflie contol board, the printed circuit board in 3D

    Crazyflie contol board

    sPyOpenSource/ESP32-PCB

    PCB boards designed with ESP32

    98 parts8MIT
  • 2 layers73 × 100 mm12V SmartSwitch 2panel, the printed circuit board in 3D

    12V SmartSwitch 2panel

    vintlabs/ESP32-PWM-Driver-Devkit

    ESP WROOM-32 DevKit with 8 2A PWM Drivers (5-15V)

    160 parts5
  • 2 layers25.2 × 59.4 mmEsp32-pcb, the printed circuit board in 3D

    Esp32-pcb

    krwc/doge32

    Yet another ESP32 PCB

    50 parts3
  • 4 layers28.3 × 52.6 mmPGP Badge, the printed circuit board in 3D

    PGP Badge

    bentomo/PGP-Badge

    This is a hardware implementation using Yohanes' pgp reverse engineering repo

    60 parts2BSD-2-Clause

Questions

How big is the Yed eye PCB?

It measures 150.5 × 54.4 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Yed eye use?

114 parts, built around the CP2102N-A01-GQFN24, ESP32-WROOM-32, N25Q128A13EF840E and IS42S16400J-6TL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Yed eye KiCad files?

From the caglarylmz/Personal-PCB-Projects repository on GitHub, at the commit this page was made from: the board is Yed_eye/Yed_eye.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Yed eye design in my own project?

Its repository states no licence, so its author keeps all rights: ask caglarylmz before reusing the design.