4 layers65 × 30 mm
ESP32-Zip
vintlabs/ESP32-Zip
ESP32 Development Module compatible with Pi Zero cases (hardware)
47 parts10GPL-3.0
4 layers65.1 × 70 mm
ESP32-Zip Panelized
vintlabs/ESP32-Zip10ESP32 Development Module compatible with Pi Zero cases (hardware)
- Size
- 65.1 × 70 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 88
- Nets
- 62
- Pads
- 418
- Tracks, vias
- 1,383, 200
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Aug 2019
- Updated
- 15 Aug 2020
Overview
ESP32-Zip Panelized is an open-source printed circuit board by vintlabs, from the vintlabs/ESP32-Zip repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 65.1 × 70 mm with 88 parts on 62 nets, routed with 1,383 tracks and 200 vias.
It is built around the CP2102N-A01-GQFN24, ESP32-WROOM-32 and MMBT2222A, with the SP0503BAHTG among its other parts. Its parts include 22 resistors, 18 capacitors, 8 diodes, 8 connectors and 6 ICs. It belongs with the ESP32 boards of this library.
Main components
4
CP2102N-A01-GQFN24
QFN-24-EP(4x4)3Mbps 3V~3.6V Transceiver QFN-24-EP(4x4) USB Converters ROHSSilicon LabsUSB Converters
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
MMBT2222A
SOT-23-55℃~+150℃ 1 NPN 100 100nA 1V 300MHz 300mW 40V 600mA 6V NPN Standalone SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
SP0503BAHTG
SOT-143-55℃~+125℃ 10A@8/20us 14V 150W@8/20us 30pF、60pF 5.5V 6V 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdESP32-Zip
ESP32 Development kit with the same form factor (and similar pinout!) to the Raspberry Pi Zero / Zero Wireless
Note: This is not intended to be used with Pi Hats directly, however it is possible that many will work. If you want to try with a Pi Hat, please check the pinouts very carefully!
Board top:
Board bottom:
Pinout Diagram:
The real board:
Parts
88| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R3, R5, R5, R6, R6, R7, R7, R8, R8 |
| 10 | 10u | Capacitor_SMD:C_0805_2012Metric | C3, C3, C5, C5, C6, C6, C8, C8, C9, C9 |
| 8 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C1, C1, C4, C4, C7, C7, C10, C10 |
| 6 | 2.2k | Resistor_SMD:R_0805_2012Metric | R9, R9, R10, R10, R11, R11 |
| 6 | LED | LED_SMD:LED_0805_2012Metric | D2, D2, D3, D3, D4, D4 |
| 4 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q1, Q1, Q2, Q2 |
| 4 | SW_Push | 12V-SmartSwitch:SW_TACTILE_PO21301 | SW1, SW1, SW2, SW2 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R4, R4 |
| 2 | 22.1k | Resistor_SMD:R_0805_2012Metric | R1, R1 |
| 2 | 47.5k | Resistor_SMD:R_0805_2012Metric | R2, R2 |
| 2 | AP7215-33YG-13 | ESP32-Zip:AP7215-33YG-13 | U1, U1 |
| 2 | CP2102N-A01-GQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U2, U2 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4, J4 |
| 2 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3, J3 |
| 2 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J2, J2 |
| 2 | ESP32-WROOM-32 | 12V-SmartSwitch:ESP32-WROOM-32-Espressif-Symbol-Kicad-62379 | U3, U3 |
| 2 | LOGO | 12V-SmartSwitch:WiFi_logo | G***, G*** |
| 2 | LOGO | 12V-SmartSwitch:BT_logo_sm | G***, G*** |
| 2 | LOGO | ESP32-Zip:halfleaf | G***, G*** |
| 2 | SP0503BAHT | Package_TO_SOT_SMD:SOT-143 | D1, D1 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP3, JP3 |
| 2 | USB_B_Micro | 12V-SmartSwitch:USB_Micro-B_Amphenol_10118194-0001LF_Horizontal | J1, J1 |
The 78 most common of 88 parts.
More from vintlabs/ESP32-Zip
1Similar boards
- 2 layers73 × 100 mm
12V SmartSwitch 2panel
vintlabs/ESP32-PWM-Driver-Devkit
ESP WROOM-32 DevKit with 8 2A PWM Drivers (5-15V)
160 parts5 - 2 layers65 × 56 mm
- 2 layers25.2 × 59.4 mm
- 2 layers90 × 80 mm
VLAD
icl-rocketry/VLAD-CanSat
Repository Containing the hardware and firmware of VLAD, a stabby boi who will participate in the Mach-21 CanSat competition
103 parts1 - 2 layers44.3 × 46.3 mm
Catear pcb
TobleMiner/catear-pcb
This repo contains the PCB for the Nekomimi project of @BenBE . It will be used to illuminate 3D printed catears.
121 parts1 - 2 layers95 × 95 mm
Base controller
cgbriggs99/InstrumentController
Controller for an instrument panel. Interfaces with MSFS.
41 partsEPL-2.0 - 4 layers69.8 × 69.8 mm
FreeEEG32
neuroidss/FreeEEG32-alpha1.0
ALPHA1.0 TEST FAILED, USE NEW VERSION INSTEAD FreeEEG32 alpha1.0 32 channels mobile electroencephalography under GNU AGPL 24 bits, 4kSPS ADCs 4x AD7770 MCU STM32F427ZI WIFI ESP-12F (ESP8266) USB CP2102N Accel & hyro…
217 parts39AGPL-3.0 - 2 layers100 × 99.2 mm
Usb serial interface panelized
willemcvu/midi-solenoid-driver
A set of PCBs to drive solenoids using MIDI data, for use in automating musical instruments.
114 parts21MIT
Questions
How big is the ESP32-Zip Panelized PCB?
It measures 65.1 × 70 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ESP32-Zip Panelized use?
88 parts, built around the CP2102N-A01-GQFN24, ESP32-WROOM-32, MMBT2222A and SP0503BAHTG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32-Zip Panelized KiCad files?
From the vintlabs/ESP32-Zip repository on GitHub, at the commit this page was made from: the board is ESP32-Zip-Panelized.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32-Zip Panelized design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).