Skip to the content
4 layers80.5 × 61 mmGuitar looper USB, the printed circuit board in 3D

Guitar looper USB

LubinRF/Guitar_Looper_PCB
Size
80.5 × 61 mm
Copper layers
4
Thickness
1.6 mm
Parts
70
Nets
93
Pads
260
Tracks, vias
439, 87
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
30 Jun 2026
Updated
30 Jun 2026

Overview

Guitar looper USB is an open-source printed circuit board by LubinRF, from the LubinRF/Guitar_Looper_PCB repository on GitHub. It is a 4-layer board of 80.5 × 61 mm with 70 parts on 93 nets, routed with 439 tracks and 87 vias.

It is built around the STM32F411RET6, SGTL5000XNLA3 and APS6404L-3SQR-SN, with the LDI1117-3.3H, PESD5V0S1BA and NMJ6HFD2-AU among its other parts. Its parts include 25 capacitors, 20 resistors, 8 diodes, 6 ICs and 3 connectors. It belongs with the audio and music boards and the STM32 boards of this library.

Main components

6

Parts

70
QtyValueFootprintReferences
8100nCapacitor_SMD:C_0603_1608MetricC9, C10, C12, C13, C14, C15, C24, C25
51kCapacitor_SMD:C_0805_2012MetricR3, R10, R11, R12, R13
51uCapacitor_SMD:C_0805_2012MetricC3, C4, C5, C6, C7
55.1kCapacitor_SMD:C_0805_2012MetricR1, R2, R4, R6, R8
5LEDCapacitor_SMD:C_0805_2012MetricD1, D2, D3, D4, D5
40.1uCapacitor_SMD:C_0603_1608MetricC20, C21, C22, C23
4MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3, H4
3100kCapacitor_SMD:C_0805_2012MetricR17, R18, R20
34-1437565-9Button_Switch_THT:SW_Push_2P1T_Toggle_CK_PVA1xxH4xxxxxxV2SW1, SW2, SW3
3PESD5V0S1BADiode_SMD:D_SOD-323D6, D7, D8
2100nCapacitor_SMD:C_0805_2012MetricC16, C18
210nCapacitor_SMD:C_0805_2012MetricC17, C19
2500kCapacitor_SMD:C_0603_1608MetricR14, R15
2NMJ6HFD2Connector_Audio:Jack_6.35mm_Neutrik_NMJ6HFD2-AU_HorizontalJ1, J3
11.8kCapacitor_SMD:C_0805_2012MetricR19
110kCapacitor_SMD:C_0805_2012MetricR21
110kCapacitor_SMD:C_0603_1608MetricR7
110uCapacitor_SMD:C_0805_2012MetricC8
110uCapacitor_SMD:C_1206_3216MetricC1
11kCapacitor_SMD:C_0603_1608MetricR16
12.2kCapacitor_SMD:C_0805_2012MetricR5
12.2uCapacitor_SMD:C_0805_2012MetricC11
122uCapacitor_SMD:C_1206_3216MetricC2
1APS6404L-3SQR-SNPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmIC1
1LDI1117-3.3HLDI1117-3.3H:SOT230P700X165-4NU1
1Murata BLM18AG601SN1DCapacitor_SMD:C_0805_2012MetricFB1
1NCP115ASN330T2GPackage_SO:TSOP-5_1.65x3.05mm_P0.95mmU2
1OPA1692IDRPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU3
1SGTL5000XNLA3Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mmU5
1STM32F411RET6Package_QFP:LQFP-64_10x10mm_P0.5mmU4
1USB_C_Receptacle_PowerOnly_6PConnector_USB:USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_HorizontalJ2

Similar boards

  • 4 layers17.8 × 38.1 mmReDIP SID, the printed circuit board in 3D

    ReDIP SID

    daglem/reDIP-SID

    MOS 6581 / 8580 SID FPGA emulation platform

    103 parts121
  • 4 layers17.8 × 38.1 mmReDIP SID, the printed circuit board in 3D

    ReDIP SID

    kitspace-test-repos/kicad6-file-collection

    103 partsMIT
  • 2 layers60 × 85 mmIceScreamer, the printed circuit board in 3D

    IceScreamer

    UC3Music/IceScreamer

    A widely known overdrive pedal

    95 parts19
  • 8 layers134 × 114 mmJlcpcb 1x1, the printed circuit board in 3D

    Jlcpcb 1x1

    t-dsp/t-dsp_core

    T-DSP Core 4-layer audio backplane — Teensy 4.1, ESP32, and T-DSP TAC5212 codec module

    172 parts6
  • 2 layers50.5 × 102 mmGuitar waveform proj, the printed circuit board in 3D

    Guitar waveform proj

    HDEmerald/waveform_viewer

    A guitar pedal whose sole purpose is to display the guitar's signal onto a display.

    40 parts1MIT
  • 2 layers145.3 × 108.8 mmLevel gate screamer, the printed circuit board in 3D

    Level gate screamer

    vermiscore/level-gate-screamer

    Tube Screamer-style overdrive with a level gate: attenuates below threshold, boosts above

    134 parts1MIT
  • 4 layers117.8 × 152.4 mmOverdrivePedal, the printed circuit board in 3D

    OverdrivePedal

    basimallawala/OverdrivePedal

    Overdrive guitar pedal, made entirely custom in KiCad and Fusion360.

    35 partsMIT

Questions

How big is the Guitar looper USB PCB?

It measures 80.5 × 61 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Guitar looper USB use?

70 parts, built around the STM32F411RET6, SGTL5000XNLA3, APS6404L-3SQR-SN and LDI1117-3.3H. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Guitar looper USB KiCad files?

From the LubinRF/Guitar_Looper_PCB repository on GitHub, at the commit this page was made from: the board is guitar_looper/guitar_looper_USB/guitar_looper_USB.kicad_pcb and its schematic guitar_looper/guitar_looper_USB/MCUDAC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Guitar looper USB design in my own project?

Its repository states no licence, so its author keeps all rights: ask LubinRF before reusing the design.