Skip to the content
2 layers50.5 × 81.6 mmAudio io protoboard, the printed circuit board in 3D
Size
50.5 × 81.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
30
Pads
56
Tracks, vias
77, 1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
30 May 2025
Updated
30 May 2025

Overview

Audio io protoboard is an open-source printed circuit board by milosgarunovic, from the milosgarunovic/audio_io_protoboard repository on GitHub. It is a 2-layer board of 50.5 × 81.6 mm with 18 parts on 30 nets, routed with 77 tracks and 1 via.

It is built around the 163-179PH-EX and NMJ6HFD2-AU. Its parts include 12 connectors, 1 resistor, 1 diode and 1 switch. It belongs with the audio and music boards of this library.

Main components

2

Parts

18
QtyValueFootprintReferences
7Screw_Terminal_01x03TerminalBlock:TerminalBlock_bornier-3_P5.08mmJ7, J8, J9, J10, J13, J14, J15
2163-179PH-EXfootprints:163179PHEXJ1, J2
2NMJ6HFD2footprints:NMJ6HFD2J3, J6
11M31T1B1M2QESfootprints:1M31T1B1M2QESS1
1LEDLED_THT:LED_D5.0mmD1
1RResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR1
1Screw_Terminal_01x02TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ16

The 15 most common of 18 parts.

Similar boards

  • 4 layers429.6 × 293.4 mmOPSpec v0.1.0, the printed circuit board in 3D

    OPSpec v0.1.0

    lepton-7/Open-Plate-Spectrophotometer

    An open-source project to build a 96-well spectrophotometer operating at 620nm. Designed from the ground-up focusing on robust electronic design.

    661 partsGPL-3.0
  • 2 layers100 × 100 mmAudio board, the printed circuit board in 3D

    Audio board

    stefvanson/audio-board

    Audio interface board design (PCB) for recording and playing back audio, MIDI IO and some additional IO.

    82 parts
  • 2 layers165.1 × 114.3 mmACE3NOKB, the printed circuit board in 3D

    ACE3NOKB

    flypie/Ace-2019

    Reimplimentation of the Jupiter ACE with slightly more modern hardware. https://www.jupiter-ace.co.uk/ the KiCad versions are the up to date designs which are available at https://jupiterdeuce.blogspot.com and…

    148 parts13GPL-3.0
  • 2 layers164.7 × 114.3 mmACE3NOKB, the printed circuit board in 3D

    ACE3NOKB

    kitspace-test-repos/kicad6-file-collection

    131 partsMIT
  • 2 layers60 × 85 mmIceScreamer, the printed circuit board in 3D

    IceScreamer

    UC3Music/IceScreamer

    A widely known overdrive pedal

    95 parts19
  • 8 layers134 × 114 mmJlcpcb 1x1, the printed circuit board in 3D

    Jlcpcb 1x1

    t-dsp/t-dsp_core

    T-DSP Core 4-layer audio backplane — Teensy 4.1, ESP32, and T-DSP TAC5212 codec module

    172 parts6
  • 2 layers50.5 × 102 mmGuitar waveform proj, the printed circuit board in 3D

    Guitar waveform proj

    HDEmerald/waveform_viewer

    A guitar pedal whose sole purpose is to display the guitar's signal onto a display.

    40 parts1MIT
  • 2 layers145.3 × 108.8 mmLevel gate screamer, the printed circuit board in 3D

    Level gate screamer

    vermiscore/level-gate-screamer

    Tube Screamer-style overdrive with a level gate: attenuates below threshold, boosts above

    134 parts1MIT

Questions

How big is the Audio io protoboard PCB?

It measures 50.5 × 81.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Audio io protoboard use?

18 parts, built around the 163-179PH-EX and NMJ6HFD2-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Audio io protoboard KiCad files?

From the milosgarunovic/audio_io_protoboard repository on GitHub, at the commit this page was made from: the board is audio_io_protoboard.kicad_pcb and its schematic audio_io_protoboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Audio io protoboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask milosgarunovic before reusing the design.