Skip to the content
2 layers99.1 × 99.1 mmVideo sight test board, the printed circuit board in 3D

Video sight test board

Kehaar38/video-sight

VIDEO SIGHT is a compact digital sight prototype built around Seeed Studio XIAO ESP32-S3 Sense.

Size
99.1 × 99.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
250
Nets
53
Pads
370
Tracks, vias
214, 73
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
21 May 2026
Updated
15 Jun 2026

Overview

Video sight test board is an open-source printed circuit board by Kehaar38, from the Kehaar38/video-sight repository on GitHub. It is a 2-layer board of 99.1 × 99.1 mm with 250 parts on 53 nets, routed with 214 tracks and 73 vias.

It is built around the ATTINY1616-SN, TPS22919DCK and AO3401A, with the BNO055 among its other parts. Its parts include 9 capacitors, 8 resistors, 8 connectors, 7 switches and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

4

README

README.md

VIDEO SIGHT

VIDEO SIGHT is a compact digital sight prototype built around Seeed Studio XIAO ESP32-S3 Sense.

The project goal is a low-latency, approximately 1x-feeling video sight with camera input, LCD display, IMU-assisted attitude information, and a lightweight ballistic overlay for airsoft use.

Current hardware direction

  • Main MCU: Seeed Studio XIAO ESP32-S3 Sense
  • Camera: XIAO ESP32-S3 Sense camera module
  • Display: Waveshare 1.83 inch LCD Rev2 / ST7789P / 240x284
  • IMU: BNO055 module
  • UI sub-MCU: ATtiny1616
  • Battery: protected 18650 cell
  • microSD CS: GPIO21 on XIAO ESP32-S3 Sense
  • Peripheral power switch: TPS22919, controlled by D6/GPIO43
  • Reverse polarity protection: AO3401A P-MOSFET

Repository layout

text
docs/
  hardware/
    parts_and_pinout.md
    power/
    reviews/
hardware/
  kicad/
firmware/
  esp32s3/
  attiny1616/

Status

Early hardware design. The current focus is the power path and first test PCB.

See:

  • docs/hardware/parts_and_pinout.md
  • docs/hardware/power/power_bom.md
  • docs/hardware/power/power_design_notes.md
  • docs/hardware/reviews/2026-05-20_power_schematic_review.md

Parts

250
QtyValueFootprintReferences
193, , , , , , , , , , , , , , , +177
40.1μFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5, C6, C7, C8
4GNDTestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mmTP1, TP7, TP12, TP14
21μFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2
24.7kΩResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR7, R8
247μF@自分用:CAP_FN_B_PANC3, C4
10.047μFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC9
1100kΩResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2
11MΩResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
11kΩResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3
1220kΩResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5
12V8_OUTTestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mmTP13
13V3TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mmTP5
1470kΩResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4
1470ΩResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR6
1AO3401APackage_TO_SOT_SMD:SOT-23Q1
1ATTINY1616-SNPackage_SO:SOIC-20W_7.5x12.8mm_P1.27mmU2
1ATTINY_VCCConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP2
1ATtiny1616_LEFTConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ6
1ATtiny1616_RIGHTConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ7
1BACKButton_Switch_THT:SW_PUSH_6mmSW6
1BAT+TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mmTP2
1BATTERYConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ1
1BATT_CURRENTConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1
1BAT_SWTestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mmTP3
1BNO055Package_DIP:DIP-8_W7.62mm_SocketJ4
1DOWNButton_Switch_THT:SW_PUSH_6mmSW4
1ENTestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mmTP6
1FRONTButton_Switch_THT:SW_PUSH_6mmSW5
1GPIO42TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mmTP8
1INPUT_DEVICEConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ8
1INTTestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mmTP15
1LCDConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ3
1MISOTestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mmTP10
1PERIPH_3V3TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mmTP11
1RESETTestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mmTP16
1RotaryEncoderRotary_Encoder:RotaryEncoder_Alps_EC12E_Vertical_H20mmSW7
1SW_BATTButton_Switch_THT:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mmSW1
1TPS22919@自分用:DCK0006A_LU1
1UPButton_Switch_THT:SW_PUSH_6mmSW3
1UPDIConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ5
1VBUSTestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mmTP9
1WAKEButton_Switch_THT:SW_PUSH_6mmSW2
1XIAOConnector_IDC:IDC-Header_2x10_P2.54mm_VerticalJ2
1XIAO_BATTestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mmTP4

The 246 most common of 250 parts.

More from Kehaar38/video-sight

1
  • 2 layers50.8 × 38.1 mmXiao esp32s3 breakout board, the printed circuit board in 3D

    Xiao esp32s3 breakout board

    Kehaar38/video-sight

    VIDEO SIGHT is a compact digital sight prototype built around Seeed Studio XIAO ESP32-S3 Sense.

    11 parts

Similar boards

  • 4 layers80 × 120 mmUAV MainBoard V3, the printed circuit board in 3D

    UAV MainBoard V3

    MennoScholten/UAV_Project

    Design and development of a UAV

    231 parts
  • 2 layers138 × 76 mmSensorboard, the printed circuit board in 3D

    Sensorboard

    Sharki-66/womo-home-esp32

    Caravan Smart Home Display with esp32

    79 partsMIT
  • 2 layers50.8 × 50.8 mmDC2026 LASIR, the printed circuit board in 3D

    DC2026 LASIR

    CmdrZin/chips_avr_examples

    AVR assembly and C code for robotics and other projects.

    38 parts6MIT
  • 4 layers174 × 29 mmOneWheelBMS, the printed circuit board in 3D

    OneWheelBMS

    ocornu/OneWheelBMS

    Open source BMS for OneWheel v1/plus

    98 parts3MIT
  • 2 layers25.4 × 28.8 mmKicad linear, the printed circuit board in 3D

    Kicad linear

    fjalvingh/8bit-busdisplay

    PCB for showing an 8 bit hex number from a 5V bus on a 7-segment display using an ATTINY1616

    7 parts1
  • 2 layers85.6 × 54 mmPersonalPCB BC, the printed circuit board in 3D

    PersonalPCB BC

    Bumb1eris/PCB_Business_Card

    A coin cell powered PCB business card that can play snake

    73 partsMIT
  • 2 layers80.5 × 53.8 mmBlynk, the printed circuit board in 3D

    Blynk

    DynamicWhiteHat/Blynk

    A feature-rich LED controller

    110 parts

Questions

How big is the Video sight test board PCB?

It measures 99.1 × 99.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Video sight test board use?

250 parts, built around the ATTINY1616-SN, TPS22919DCK, AO3401A and BNO055. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Video sight test board KiCad files?

From the Kehaar38/video-sight repository on GitHub, at the commit this page was made from: the board is hardware/kicad/video_sight_test_board/video_sight_test_board.kicad_pcb and its schematic hardware/kicad/video_sight_test_board/video_sight_test_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Video sight test board design in my own project?

Its repository states no licence, so its author keeps all rights: ask Kehaar38 before reusing the design.